For use with Kaiser SYSTEM-V enlargers, the Compound Negative Carrier enables the use of all negative masks and glass inserts measuring 3.9 x 2.9". Adjustable guide pins permit working with various film widths, including 61.5mm for 120 film, 41mm for 127 film, and 35mm film, and two grid pins are also used to ensure proper insert registration. Additionally, four stepless, adjustable masking strips are also featured for cropping your negative at the projection stage rather than with an easel.

For 05-Series SYSTEM-V Enlargers    Holds 3.9 x 2.9" Negative Masks/Inserts    Adjustable Guide Pins    Four Adjustable Masking Strips    Two Grid Pins at Standard Intervals

This negative carrier is compatible with all 05-series SYSTEM-V enlargers made from October 1994 and later.

Related Questions and Answers

Q: 1. How many grams inside the container?

A: the B+W Cyber Clean Cleaning Compound is 140 grams in weight.

Q: 2. Does this come automatically with the stabilizing mask and hood?

A: The Negative Supply Basic Film Carrier 120 MK2 only comes with Negative Supply Basic Film Carrier 120 MK2, 4 x Masks (6 x 4.5, 6 x 6, 6 x 7, 6 x 9), and Limited 2-Year Manufacturer Warranty.

Q: 3. Hands free camera strap

A: Theoreticaly maybe, but have not seen any one useing it that way, always one hand on camera when shooting.

Q: 4. I'm 5'4 female with a Nikon D810 and 500mm lens. Will this work on a Botswana safari where the vehicles are open and a bean bag would be useless and a monopod might be difficult?

A: I am 5'4 and have a nikon D750. I used the vest on a recent trip to the arctic. It was wonderful for securing the camera with the 70-200mm lens when I was getting in and out of the zodiac boats or when we were in rough waters and it takes the weight of the camera off your neck when you are out shooting for hours. The steady shot was an okay replacement for a tripod in tight or rough shooting conditions, but it is subject to the movement of your body. Use a fast shutter speed and a high ISO and you will need to keep your hands on the camera, especially with a big lens. I haven't tried it with my 500mm lens as I just bought that one.

Q: 5. Will This work with a Nikon 800mm fl Ed 5.6 lens?

A: The Nikon AF-S NIKKOR 800mm f/5.6E FL ED VR Lens (B&H # NI80056) has not been tested with the Cotton Carrier Steady Shot with Camera Vest. According to the manufacturer, a 600mm lens will place your weight forward and for some, it becomes a bit awkward. While they suggest that the system will not fail, it may not be ideal as it becomes a matter of comfort.

Q: 6. Does this fit a D500 and Nikkor 200-500 mm lens?Also, when not using for steady shot, does this function as a carrier harness, as well?

A: 1. I use it for D80 with Sigma 300-600, so it should be fine with your rig.2. Yes, it functions as an excellent camera harness, super comfortable and convenient. In fact, I do not use steady shot much, but I never go shooting with my telephoto without the vest -- the lens is too heavy to carry around my neck for more than an hour, with the vest I can walk and shoot all day long.

Q: 7. Will this work with the smallish Cotton Scout G2? I assume lateral stability wouldn't be as good as with a larger carrier, but I mainly want something to relieve the weight on my left hand when holding. Other suggestions??

A: No. The following unit is designed and made for the cotton carrier harness system for a better end-user experience.

Q: 8. Is it possible to hook a digital camera up to this to capture an image?

A: B&H has no adapters to mount a digital camera to the Celestron CM400C Compound Cordless Monocular Microscope BH #CECM400C • MFR #44134 However, I would recommend the Celestron 5.0MP Digital Microscope Imager (Black) BH #CEDMIHD5MP • MFR #44422 to attach to a laptop

Q: 9. Does this support xpan panoramic images 24x65mm?

A: Yes, this comes with three different scanning mounts. One of the scanning mounts is meant for panoramic images.

Q: 10. Will this work with CineStill CS-Lite light source?

A: The Negative Supply Basic Film Carrier 120 MK2 can work with the CineStill Film CS-Lite Camera Scanning Light Source with CS-Litemask.