27 Inch Monitor Width In Cm

Sachtler 4191 Pedestal C I System (flat Base) With Dolly 75

Product Code: ga3555
Availability: In Stock

$13,879.50 $17,071.78

Qty

11 reviews Write a review

Description
Reviews (11)

The Sachtler Pedestal C I System might look like a traditional tripod upon initial inspection, but this is far from the fact. With a patented pneumatic column designed to be adjusted to the exact weight of a given camera, lens and prompter configuration, your camera will literally be floating on air. Combined with the Dolly 75, this system is as light as a tripod while being as stable and versatile as a pedestal.

Parameters
General	None
Load Capacity	44.1 lb (20 kg)
Trim Ring	No
Bowl Diameter/Thread	100 mm
Steering Ring Diameter	5.6" (142.2 mm)
Folded/Transport Length	Not Specified By Manufacturer
Minimum Height	26.8" (68 cm)
Maximum Height	61.8" (157 cm)
Weight	20.3 lb (9.2 kg)
Post	None
Stages	1
On-Shot Stroke	15.4" (39 cm)
Dolly
Doorway Tracking Width	32" (81 cm)
Transit Doorway Width	No
Narrow Doorway Width	Not Applicable
Wheel Diameter	4" (10.1 cm)
Packaging Info
Package Weight	40 lb
Box Dimensions (LxWxH)	30.3 x 24 x 16.2"

The Pedestal C I can carry a payload of up to 44 lb (20 kg), over twice its own weight

The pedestal is anchored by a pneumatic column. The system works on the principle of compressed air, which acts as a counterweight and shock absorber, allowing seamless adjustments during a shot.

Related Questions and Answers

Q: 1. Can this head be swapped out with my Manfrotto MVH502AH Head?

A: Yes you can swap out the miliboo head for a Manfrotto 502AH

Q: 2. Does it come with any sort of box/case?

A: no it does Not

Q: 3. can wheels be replaced?

A: While we do not sell replacement casters for this dolly, you will be able to replace them. However you may need to reach out to Sachtler directly for support with this.

Q: 4. What's the footprint of the pedestal (how much space does it take on the ground)? Need to know width of the base to see if it'll fit on a platform or not.

A: The diameter of the Libec P110(B) Pneumatic Pedestal is 37.40 inches or 950mm.

Q: 5. Are there pneumatic wheels as an option?

A: Barbara is 100 percent correct. If you want to modify you could add 1/4, 5/16/, 3/8 at the max single top threaded bolt pneumatic wheels or any type of wheels to this unit. But the stock wheels are similar to hospital type smooth rolling wheels with almost zero play. They feel like sealed bearings but are clearing not both horizontal and vertical.

Q: 6. What is the minimum weight the pedestal will hold?

A: The Libec P110(S) Pedestal System with P110 Column & DL-10RB Dolly does not have a listed minimum weight as the pedestal can be filled with or release air to match the payload weight up to 66 lb.

Q: 7. I do not see a replacement quick release plate for this tripod. It looks good, put parts???

A: We do not currently offer one None are specified by the manufacturer: miliboo: Tel: 400.829.0669 Email sales@miliboo.cn

Q: 8. Is there track that is compatible with these dolly wheels?

A: We are not aware of a track that will work with this dolly. This dolly has standard casters, you would need to look at a dolly that offers track wheels as well to be used in a track. The Glide Gear SYL-960 Floor/Track Hybrid Tripod Dolly, B&H # GLSYL960, is a nice option to consider. https://bhpho.to/2tCfHBx

Q: 9. doesthisincludethetripod?

A: Yes, the OZEN Agile 100mm 20M (E-Z LOAD MAX) with 2 Extending Pan Bars plus PED50 (includes DOLLY HD) does include the tripod legs.

Q: 10. Can you tell me what the maximum height on this setup is with the wheels on and the included fluid head mounted ? In other words, from the floor to the top of the fluid head ? Thanks !

A: The maximum height is roughly 74 inches with the dolly and head attached.

Ed	04/08/2024
I am using this tripod for a Lumix GH6 that has a cage and various attachments. This is a great tripod for that type of rig. It is very solid and I have a lot of confidence in it. The leg locks are tight and the spreader helps with overall stability. he ball head pan and tilt are smooth, although I use it mostly as a stationary platform. In my opinion this tripod has features and build of more expensive units. I was influenced by other positive Internet reviews. 5

Jessica	01/08/2024
It's works great, good price, smooth and lightweight. 5

Ric D.	29/07/2024
Used as the support for our main canera in a studio setting. It has added to the shots we can produce with very smooth movments while staying on the subject we are filming. This is a great product, and somthing I've wanted for years but could not justify the cost. The price point of this is where I needed to be and offers all the features of units costing 3 or 4 times more. 5

Vince	19/07/2024
This product is high up there on my list of must haves for quality production. Affordably priced, smooth wheels, and all around great pedestal. Funny sidenote, make sure you read the instructions, as two of our awesome employees took the entire head attachment apart before realizing where the screw holes were... They did however expertly put it back to gether....with the help of a third employee...me. 5

James	24/06/2024
Product is GREAT!!!!!! 5

Donald	01/06/2024
Used this tripod to photograph the sun using a white light filter. It has no problem handling the Pentax K-3 and Pentax 70-210mm and 1.4x TC. = 441mm with the K-3's 1.5x crop added in. The complete setup was rock solid. 5

Michael	03/05/2024
The assembly was a breeze and how it performed given the price is well above most also it's lightweight and can support double its weight and it's very sturdy 5

Lisa	02/05/2024
Very happy with this tripod. The weight makes it sturdy without it being too heavy. 5

Twana	25/04/2024
This also works very well for a small telescope. I've tried a number of different solutions for everything from a 70mm refractor to a 6SCT and this tripod would handle the weight for all of them but is actually only a good solution for a couple of them in my opinion. Specifically, the 70mm refractor. Unless you are always looking at zenith and even then, I'm not so sure something couldn't be worked out, this works beautifully. Scanning the night time sky up to 70 degrees, is better than anything else I've seen or tried in this price range. There are better solutions, to be sure, especially used but for $175, hands down the easiest and most satisfying experience to date. The fluid head is fantastic. Not sure I would go over 10 pounds in total, and even 10 pounds might be pushing it but the 70mm refractor is well under 10 pounds. Of course if you are need or want something that is go to this will not work. 5

Chrisg	16/04/2024
I actually bought this for my nephew in video school. I played with it and realized my cheapo one that I occasionally use is a cheapo lol. This feels and moves butter smooth. I may pick one up again for myself. 5