MBassador from MeldaProduction is a plug-in designed to help musicians and producers recreate the missing bottom end of a recording with not enough bass level, or generate deep subharmonics that do not exist in nature, in a tight, precise, and musical way.

MBassador employs a crossover module to separate the bass content from the original signal, leaving the high-ends intact and sending the low-ends to be processed by three modules. The Bass Enhancer module resynthesizes the bass signal itself, creating higher harmonics that render the bass frequencies more apparent in a mix. This stage is enabled by default and is effective when looking to make your bass audible on low-end speakers that lack bass response, or on commonly used low-quality headphones.

The Sub Generator produces a subharmonic of the original signal, one octave below the lowest note in the signal. It works best on monophonic, percussive bass content such as bass guitars or kick drums. The Sub 2 Generator creates a 2nd subharmonic two octaves below the lowest note. The bass can be "felt" while you can hear the higher harmonics of the tone. It is ideal for electronic music styles such as Drum & Bass, Dubstep or Hip Hop.

Crossover Module    Bass Enhancer Module    2 x Subharmonic Generator Modules    Classic Meters and Time Graphs    Brickwall Limiter    Mono, Stereo, Mid/Side Signals    64-Bit/192 kHz Audio    AAX Native, Audio Units, VST, VST3    Mac OS X, Windows

• Advanced user interface is freely resizable and stylable — choose between knobs, sliders or buttons
• All the graphics are accelerated using your GPU graphical interface — provides a quick response and frees up your CPU power
• Visualisation engine with classic meters and time graphs
• Four full-featured modulators control any set of parameters, including other modulators
• Each modulator works as an LFO, level follower, MIDI/audio-triggered ADSR envelope, randomizer, pitch detector, or even in combination — lets you listen to the sidechain
• Control multiple parameters using a single multiparameter button
• Handles mono, stereo signals, and mid/side encoding for stereo field processing, discrete left & right channels, discrete mid- or side- signal, and up to 8 channels of surround audio
• Automatic gain compensation (AGC) quickly adapts to current settings, and ensures that the output sounds as loud as the input
• Safety brickwall limiter ensures that the output stays below 0 dB
• Minimum-phase and high-quality linear-phase upsampling algorithms help avoid aliasing
• Compatible with MIDI controllers and MIDI learn
• 64-bit audio processing with sampling rate up to 192 kHz
• Fast processing power, optimized for newest AVX-capable processors
• Global preset management and online preset exchange — automatically share your presets and download presets of other users, via company's servers
• Supports all major hosts on Mac/Windows platforms
• No dongle or internet access required for activation
• Free-for-life updates

Related Questions and Answers

Q: 1. Is there a D-Tap power cable for this?

A: There are several D-Tap to 12V barrel cables on this site.

Q: 2. Will this give me clean switches on a Blackmagic 16x16 3G HD-SDI switcher?

A: Hi there... I am the user of this Sync Generator but i am not the expertise... As far as i use this, this BM Sync Generator can act same like other Masterclock / SPG... which is to synchronize / lock all the devices (such as camera basestation / vision mixer / universal converter) that need "Ref In" in your Multi-Camera Production system....

Q: 3. So can this generate a time (clock) sync to my 4 BM hyperdeck studio minis? so they all receive the same time whether they are all recording or not? So if one of the rec deck starts recording a later time it will match the other recorders that are currently recoding ? Assuming they are all connected to this device?

A: this is NOT a timecode in a (sync)generator. There is no external timecode input on the Hyperdeck Mini if you would like to embed time code it would have to be imbedded directly into the video using something like the Tentacle Sync Sync E Timecode Generator.

Q: 4. Can this Sync Generator support connect with 4 pieces of "Hyperdesk Studio 12G" (2160P / 60 frame) ? How to set the video format ? Just set to PAL or NTSC ?

A: Yes. You can set the Sync Generator to 1080i60 tri level in this case.

Q: 5. Do you have to select somewhere to change from Tri-level or black burst or does it do it automatically depending on what format you have selected?

A: You can manually select the video format and it will automatically output tri-level when choosing high definition formats and blackburst when choosing standard definition formats.

Q: 6. Can I use BNC splitters (BNC Male Connector to BNC Double Female (T-Shape) Adaptors, for CCTV) (https://www.amazon.com/Splitter-Connector-Double-T-Shape-Adaptor/dp/B06XHT9QHG) at each Ref-Out connector to double the Ref-Out sync-ability to 12 instead of 6?

A: That is not a proper solution and there is no guarantee that it will work. There are analog video distribution amplifiers available on this site that will work for this purpose.

Q: 7. Can you convert a 1080p SDI source to 720P by only clicking the buttons or do you need to do anything else with the software? THanks.

A: The following unit does not support video scaling , it only supports different signals in different formats.

Q: 8. Can the UHD 4K resolution be added to this converter?

A: According to BMD website, this works with UHD.

Q: 9. What is the right cable for RED?

A: The following B&H code will be the correct cable: RE7900643

Q: 10. Curious how many ml the cartridge for the gloss enhancer is, i.e. 130ml?

A: The Gloss Enhancer cartridge is 130 ml. However this is the printhead, not the ink cartridge.