The extra-large/big mount, black Bubblebee Industries The Spacer Bubble System is a multipiece, adaptable windshield system for shotgun microphones that allows you to quickly switch from indoor to outdoor recordings in a matter of a few seconds. It fits microphones 23 to 26mm in diameter and has an inner depth of 180mm to cover all the ports on the mic. Designed specifically for boom operators, videographers, sound mixers, and sound recordists working under changing locations, it greatly reduces noise from wind, vocal plosives, and boom 'swoosh' while remaining acoustically transparent. The system includes the Spacer Bubble, The Long-Hair Spacer Cover (fur), and a mesh storage bag.

Reduces Wind Noise    Fits Microphones 23 to 26mm in Diameter    180mm Inner Depth    The Spacer Bubble Windshield    The Long-Haired Fur Cover    Acoustically Transparent Design    Quick-Drying Fur    Mesh Storage Bag

Sennheiser MKH 60

• The Spacer Bubble windshield is constructed of a noise-free mesh base with coarse foam inside. The company's specially designed rubber base provides easy and secure mounting to keep the windshield firmly in place.

• Switch locations fast and get great audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh', and wind.
• Specially designed rubber base for fast, easy, and secure mounting.
• The Base windshield is made from highly efficient mesh, allowing your microphone to sound as natural as possible.
• The slip-on fur is made from Bubblebee Industries' best high-density imitation fur, which allows for optimal frequency transparency and effective wind protection.
• Quick-drying fur: If it gets wet, simply place the fur cover it in the aerated mesh bag and allow it to dry naturally.
• A practical mesh bag is included for easy storage and fast mounting.
• Designed in Denmark by sound lovers, for sound lovers.

• The combination of foam and mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip on the included long-haired fur cover and get effective wind noise protection with optimal transparency within seconds.
• If you're working in light-to-medium winds, you can use The Short-Haired Spacer Cover (available separately) instead.

Related Questions and Answers

Q: 1. Mkh50?

A: No, the Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Small-Diaphragm Mics (Black, Extra-Small) is not compatible for use with the Sennheiser MKH 50 Microphone. All of the Spacer Bubble models are designed to fit microphones that have a diameter of 18 to 24mm, but the MKH 50 has a 25mm diameter. As a better option, you can use the Rycote Super-Softie Windshield for Shotgun Mics - 5cm, 24/25 (B&H # RYWSQAT), which is designed to fit mics that have a diameter of 24 to 25mm and it is compatible for use with the MKH 50.

Q: 2. What is the outer length in cm?

A: The Bubblebee Industries The Windbreaker is designed specifically for use with the Rycote Modular Windshield WS 4 Kit. The manufacturer has not provided any specifications for the Windbreaker, but the Rycote Windshield has a body length of 33 cm, so the internal length of the Windbreaker should match..

Q: 3. Will this work for the Rode NTG-3?

A: Yes, the Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (Large, Black) is compatible with the Rode NTG3 Shotgun Microphone.

Q: 4. What size fits the Tascam DR-10L?

A: The diameter of the capsule for the Tascam TM-10L lavalier microphone is 6.5mm. Therefore, you can use the Large or X-Large size of the Bubblebee Industries The Microphone Foam for Lavalier Mics Pop Filter with it.

Q: 5. Does it work for sennheiser mke600? If not, which one do you have that does fit it?

A: Yes, the Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics will fit mics with a diameter of 18 to 24mm, and the Sennheiser MKE 600 has a diameter of 20mm.

Q: 6. How long is the outer length of the Large size Spacer Bubble Windshield with Fur Cover?

A: The total length of the Bubblebee Industries BBI-SB is about 6.5 inches.

Q: 7. Is this the correct size for a Sennheiser XS-R USB C lavalier?

A: According to the specs for the Sennheiser XS lavalier microphone, the capsule diameter is 10.5mm. The Bubblebee Industries The Windbubble PRO Fur Windscreen for Omni Lavalier Mics (Black, Medium, Single) will only work with mic diameter sizes up to 8mm. Therefore, you will need to use the next size up, for compatibility with the Sennheiser XS.

Q: 8. What is the length of the item?

A: The manufacturer has provided dimensions for the inside depth of the Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Small-Diaphragm Mics (Extra-Small) which is 2.2" (55mm). It can be used with microphones that have a diameter of 0.7 to 0.9" (18 to 24mm).

Q: 9. will this fit on the " Rycote Stereo Cyclone DMS Kit 1 Windshield System for Schoeps CCM 4 Pair & CCM 8" ?

A: The Bubblebee Industries The Fur Wind Jacket for Cinela Pianissimo Windshield is designed for use specifically for the Cinela Pianissimo Windshield, but may not be compatible for use with the Rycote Stereo Cyclone DMS Kit 1 Windshield System for Schoeps CCM 4 Pair & CCM 8. Unfortunately, we do not have the Stereo Cyclone in stock to be able to confirm whether or not the Fur Windjacket will fit.

Q: 10. Which Bubblebee Long Hair Windkiller for the Azden SGM-250CX Short Shotgun Microphone? Small or Extra Small?

A: The Azden SGM-250CX Short Shotgun Microphone requires the Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (Small, Black). The capsule section of the microphone is 4" long, and the windshield is 4.1" long.