The Rayden RB10 Bi-Color 1 x 1 Studio & Field LED Light from ikan is built into a heavy-duty molded plastic chassis providing a lightweight yet strong variable color fixture with enhanced features such as 100-10% flicker-free dimming, LCD display, and an included wireless remote. It produces a 50° beam spread and the barndoors feature integrated gel clips.

The fixture is DC powered, incorporating a 4-pin XLR connector and including an AC/DC power supply for mains power. Interchangeable Gold Mount/V-Mount plates are included so no worrying about getting the fixture that matches your battery system. The four-leaf barndoors provide control over light spill, and feature removable light intensifiers to suit your taste. The yoke is angled forward 30°, which allows you to open the barndoors all the way without hitting the yoke when the light is pointed straight forward. The fixture also has a combo baby pin/junior stud mount so you can mount it on a stand or hang it from a grid with optional clamps.

1 x Rayden 50° Bi-Color RB10    2 x Rayden 50° Bi-Color RB5    3 x Light Stands    3 x Power Supplies with Cables    3 x Remote Controls    3 x Yoke Mounts    3 x Gold Mount Battery Plates    3 x V-Mount Battery Plates    1 x Light Stand Bag    1 x Light Kit Bag

The big yellow knob on the back of the unit controls both the color temperature selection and the dimming of the unit. It features an indent for fingertip control and is positioned at the edge of the fixture, which is cut away allowing you to adjust the knob from the side of the unit when the back is difficult to access. When you power on the light the yellow dimming knob defaults to controlling the dimming, pressing in the knob switches it to color temperature control (3200 to 5600K), pressing it again reverts back to dimming. You can also use the included wireless remote to control the color temperature and dimming.

The light output stays consistent as you transition across the color temperature range, preventing the brightness spike that happens with many LED lights around 4300K.

While some users may enjoy the small increase in light output that intensifiers bring, other users prefer to use barndoors without intensifiers. The removable intensifiers that come with this light attach securely to the barndoors. You do not have to attach all four intensifiers, which allows you choose how many barndoors to use for intensifying your output and how many barndoors to use to cut spill.

The top and bottom barndoors integrate gel clips for attaching diffusion or gels.

The fixture features an interchangeable Gold Mount battery plate. Removing four screws and disconnecting the snap connector allows you to swap out the included V-mount plate.

On the back of the fixture is an LCD info screen that displays the battery power remaining, brightness percentage and color temperature.

Related Questions and Answers

Q: 1. Hi, I'm interested in buying this kit and I'd like to know if there are any barn doors that can be adapted to these models?. Stay tuned.

A: Unfortunately, the manufacturer does not produce a set of barndoors for these panels.

Q: 2. Are the barn doors removable?

A: Unfortunately, the barndoors are not removable.

Q: 3. How long can these lights run in a single day, can the bulbs be replaced and how long would they likely last run 4- 6 hrs a day? Thanks.

A: I had 6 to 8 hour shoot days and the light ran fine and I've never had a situation where I had to change the light bulbs. They run at a cool temperature, so it was easy to forget it was on.

Q: 4. Is it possible to turn off the warning sound the light makes? It beeps loudly when the battery is low.

A: Sorry for the delay in answering this, If you hold down the C & D buttons for 5 seconds on the remote it should remove the beeping sound.

Q: 5. What is a good replacement AC power adapter? In our kit of 3, 2 have stopped working

A: We have the replacement AC power adapter a href= http://ikancorp.com/productdetail.php?id=1974&model=ac-15v-4a target= _blank http://ikancorp.com/productdetail.php?id=1974&model=ac-15v-4a/a

Q: 6. Can these lights be angled up or down?

A: The yoke will allow for a good range of movement.

Q: 7. What is the total packing info for the whole kit (3x light panel & stands ) in weight and dimension. Need to compute freight?

A: From the MFR: Shipping Weight: 57.0 lb Number of Boxes: 2 Box 1 Dimensions (L x W x H): 24 x 20 x 20" Box 2 Dimensions (L x W x H): 41 x 9 x 9"

Q: 8. If you were to lose the remotes for these lights, can the remote controls be sold separately? Spoiler alert, our remotes are lost...

A: Hello,We have spare remotes available- they would look the same as the ones that shipped with your lights. We have them in stock and ready to ship.Thanks,Bryan

Q: 9. Do these lights come with batteries? How are they charged?

A: Annie, no, these lights do not come with batteries.

Q: 10. Is there a slot for a diffusion panel in these lights? Do you sell a panel that would fit? Not looking for sheets of diffusion gel. Thanks

A: No, sheets of gel diffusion would be your best bet.