The Shure 5-Pin XLR Male to BCASCA Cable for BRH50M, BRH440M, and BRH441M Broadcast Headsets is a detachable cable for use with the BRH-series of headsets. These headsets feature a modular cable design that allows them to interface with a wide variety of audio gear simply by attaching the cable with the appropriate type of Neutrik connector.

Detachable 6-Conductor Cable    6-Pin BCASCA Headset Connector    Neutrik Connector

Related Questions and Answers

Q: 1. Can I use this cable to power my Fiilex P360 pro to the 15Volt XLR 4 output of the Fxlion Mega Battery without any concerns?

A: While the P360 Pro uses a 2.5mm DC barrel connection, this particular cable has not been tested with it to our knowledge.

Q: 2. Is it possible to use this for DMX 5-Pin transmission to fixtures that have TRRS connections?

A: The Senal SMH-H5X2 2.5mm TRRS to 5-Pin XLR Male Cable for Communication Headsets does not have the correct wiring to be used with DMX fixtures; it is for use with audio devices only.

Q: 3. Will this filter RFI from the output of my mixer? If used at the amp?

A: Yes it should filter

Q: 4. How does an unpowered/passive transformer provide 24dB of gain?

A: The 24dB of gain provided by the Shure Microphone Matching Transformer XLR Female to 1/4" Male is achieved when connecting a balanced low-impedance microphone output to an unbalanced high impedance input.

Q: 5. Would this cable work for the Godox VL 150?

A: Yes. The unit runs of a 4pin XLR system.

Q: 6. Can not find any documentation how the Neutrik XLR 5-pin male connector is wired? Which pin is what?

A: The specifications provided by Shure are for the version with unterminated cable end. The model with the 5 pin Neutrik plug attached is not described anywhere in any Shure manual...!

Q: 7. It can connect to a camera with xlr inputs, correct? The description only lists recorders and mixers.

A: Yes the Rode Wireless GO to 3-Pin XLR Male Low-Profile Cable can connect to a camera with an XLR mic input.

Q: 8. will this cable work AND supply phantom power to a Shure VP88 stereo mic?

A: Yes, this Cable Techniques Y-cable will work with the Shure VP88. In order to power the mic, each of the 3-pin XLR connectors must be connected to a phantom power

Q: 9. Will this headset work in the PortaCom system?

A: Based on the wiring specs available, this headset is not compatible with a Portacom system. I would recommend using a Portacom headset such as the H-2000s for a Portacom system. https://www.bhphotovideo.com/c/product/149411-REG/Porta_Com_H_2000S_H200S_Single_Sided.html

Q: 10. What is the weight of the cable, without packaging?

A: I'm sorry, but I don't have a listed weight for the Cable Techniques Coiled Jumper Cable Low-Profile (6 to 15"). This is normally packaged in a simple plastic bag, so the 0.155 lbs packed weight is very close to the weight of the cable alone.