Record Full HD 1920 x 1080/60/24p video over, under, or near the water's surface with your Canon XF205 HD Camcorder in this VXF2 Underwater Housing from Ewa-Marine. The enclosure has a depth rating of 32.8' and uses a corrosion-resistant clamping rail seal to keep your valuable investment safe and dry. Easy access to all camera controls is provided right through the clear, double-laminated PVC body. The housing has an integrated, optically neutral, flat glass lens port. Mount the supplied CA 67mm filter thread adapter ring onto lenses with the same thread diameter, in order to fix the front element to the interior of the port and hold it securely in place. Additionally, both an RA62-67mm and an RA 58-62mm step-up ring are included to allow you to use lenses with 58mm and 62mm filter diameters.

Depth Rating: 32.8'    Access to All Camera Controls    Clear, Double-Laminated PVC Body    Optically Neutral, Flat Glass Lens Port    Corrosion-Resistant Clamping Rail Seal    CA 67mm Filter Thread Adapter Ring    RA62-67mm & 58-62mm Step-Up Rings

• Depth rating: 32.8'
• Corrosion-resistant clamping rail seal with knurled thumb screw knobs for tightening

• Easy access to all camera controls is provided right through housing's thin, flexible body

• Dedicated sleeve allows camera's viewfinder to be set up in central position

• Double-laminated, corrosion-resistant PVC body, which is clear to allow you to monitor waterproof seal and maintain full view of camera and lens
• Straps at bottom of housing allow weights to be attached for ideal buoyancy beneath surface

• Integrated, optically neutral, flat glass lens port
• Mount supplied CA 67mm filter thread adapter ring onto lenses with same thread diameter, in order to fix front element to interior of port and hold it securely in place
• RA62-67mm and RA 58-62mm step-up rings included to allow you to use lenses with 58mm and 62mm filter diameters

• Housing delivered in a carrying case with a waterproof interior
• Initial supply of CD5 drying agent to absorb moisture/condensation
• Foam padding to take up any empty space when shooting above water; below surface, water pressure will compress housing and eliminate excess space

Related Questions and Answers

Q: 1. Is this for the 5d mrk iii?

A: no for that camera use the U-B100

Q: 2. Will a leica m6 w/ 35mm cron fit?

A: Yes, it appears the Ewa-Marine D-B Underwater Housing For Mirrorless Cameras may work for your usage needs.

Q: 3. Will this accommodate a canon 7d mark ii?

A: Yes, it will fit your 7D II without a grip and a 24-70mm or shorter lens.

Q: 4. Would this be compatible with the canon r5, 5D mark 4, and/or 1V HS, all with either a 35mm or 50mm prime lens?

A: No, those cameras are no listed as compatible and are too large for the Ewa-Marine U-A100 Underwater Housing for DSLRs and Mirrorless Cameras.

Q: 5. is this housing compatible with the Sony a6000 with an 18-200 lens?

A: No, it is not. It can only take lenses up to 2.8 inches, and the 18-200mm is more than that at its smallest.

Q: 6. This housing is compatible with Sony A6000?

A: Yes is perfect

Q: 7. What is the max lens length that can be used with this?

A: I would say a 5" lens would be max.

Q: 8. Would a Olympus E-M1 Mark II with a 12-40mm F2.8 fit?

A: No, the Ewa-Marine D-B Underwater Housing For Mirrorless Cameras will not work with the Olympus E-M1 Mark II with a 12-40mm F2.8. This one does but does not go as deep, https://bhpho.to/3S9OWSu

Q: 9. Does the lens sit flush with the contact glass via screw size (to avoid reflections and shadows)?

A: Yes the C-A system has a ring that threads onto your lens and pressure fits into the front port.

Q: 10. Is the Ewa-Marine D-B housing compatible with the Nikon Z7?

A: It is but if you are planning on using adapted lenses or larger filter threaded lenses i would go to the U-A100