The Isolation Shield and Stand-Mounted Acoustic Enclosure from On-Stage is a lightweight and portable shield that mounts onto most standard microphone stands, creating a mini recording studio. The vented aluminum surround panel, metal frame, and 2" acoustic foam can be used to block out unwanted background noise or reflections, and improve the direct sound output when recording.

It includes a mounting bracket for attaching the shield to most standard microphone stands, and a microphone-mounting bar so you can position your mic from two-to-seven inches from the screen. The entire screen adjusts vertically up to 5-1/2" in height.

Vented Aluminum Panel with 2" Foam    Lightweight and Portable    Absorbs Unwanted Room Noise    Helps Eliminate Reflections    Semicircular Design    Adjustable Depth and Height of Shield    Attaches to Most Standard Mic Stands    Shaft Included to Mount Microphone

Related Questions and Answers

Q: 1. Would this be ok for Focal ALPHA 80 EVO?

A: The IsoAcoustics ISO-155 Medium Speaker Monitor Acoustic Isolation Stands measure 6.1 x 7.5" (L x W), so they would be too small for the Focal Alpha 80 EVO, which measures 11.7 x 15.4 x 13".

Q: 2. Hi will these work for the ADAM Audio T5V 5" Powered Studio Monitor or do i need the next ones up the medium ones ?

A: The area covered by the IsoAcoustics ISO-130 Small Speaker Monitor Acoustic Isolation Stands is small compared to the dimensional specification of the Adam Professional Audio T5V T-Series Active Nearfield Monitor (11.7 x 7.0"). The IsoAcoustics ISO-155 Medium Speaker Monitor Acoustic Isolation Stands (BH #ISO155PR) would provide better coverage in this scenario: https://bhpho.to/3GHBv4C

Q: 3. Do these need a sandbag to stand on its own? If so, how many?

A: A pair of sandbags such as BH #IMSBEO5 would be recommended for use with this Pyle Pro PSIP24 Sound Absorbing Wall Panel. It is balanced well enough to stand on its own, but will be more stable with the use of sandbags.

Q: 4. I already happen to have the foam. Do you sell the frame with stand without the foam?

A: Sorry we do not sell just the frame.

Q: 5. Will this work with an NT1-A with the shock mount they come with?

A: Yes, the Rode NT1-A can be mounted within the Auray Foldable Desktop Isolation Filter.

Q: 6. Does this rack come with screws to mount gear?

A: I do not remember, but if money is any concern, I will note that I am still using this item and it is by far the most economical means to my desired end. I've used several racks, and (augmented with a bit of rudimentary carpentry) this is the value I have sought.

Q: 7. Is this enough for JBL 305p?

A: yes; per the pec sheet: Weight Capacity (Maximum) Short Setting: 40 lb / 18.1 kg Tall Setting: 35 lb / 15.9 kg The JBL: 305P is less than 11 pounds.

Q: 8. Can I use this matte box on the seen cine lenses?

A: Yes, this Matte box will work with Cine lenses that have a 114mm front diameter or smaller (with adapters). This kit "includes six step-down rings (52-82mm, 58-82mm, 62-82mm, 67-82mm, 72-82mm, and 77-82mm)"

Q: 9. Does it also have the corners to fit a 4x4 filter?

A: Hello Michael, Thank you for your question. The filter holders inside our MAT4X56 do have a groove at the bottom, combined with the spring loaded bracket at the top of the holder which will hold the 4x4 filters in place. We hope this answers your question and we thank you for your interest in our products. The SHAPE team

Q: 10. Is there a higher version of this rack stand? (for ground floor use)

A: This is the highest simple rack space table or floor format rack stand we offer. 12 u spaces everything else is smaller