The 19mm to 15mm Rod Converter for FF-02 from LanParte is a 15mm adapter that enables you to use a 19mm-based LanParte FF-02 follow focus on industry standard 15mm rods. This lightweight clamp is made from aluminum.

Use 19mm-Based FF-02 on 15mm Rods    For LanParte FF-02 Follow Focus

Related Questions and Answers

Q: 1. Can I use 2 remotes to control 2 cameras INDEPENDENTLY? I do not want one remote to control 2. I just want to make sure that if I press record on one button that it's not triggering both remotes.

A: Unfortunately because they run on the same frequency and are not paired specifically one to the other, you could not use 2 remotes to control 2 cameras independently from one another. However, you can always use one remote to control 2 cameras at the same time if that is useful in your situation.

Q: 2. It works with VCT Universal Baseplate (zacuto)? Thanks.

A: Yes. I use it with Zacuto's Universal Baseplate and it works great. If you're using shorter lenses, such as CP.2s, CN-Es, Xeens or Rokinon Cine DSs, you may need to buy some shorter 3.5 15mm rods so that you can lower the bottom of the matte box below the rods. This allows you to center the matte box on the lens. I use this setup with a URSA Mini 4.6k, but if you are using a taller camera such as a RED, which has a higher lens mount, you may be OK.

Q: 3. Will this work with the BGH1?

A: Technically the LanParte LRC-02 Remote Control for Panasonic Cameras should work with the Panasonic Lumix BGH1 Box Cinema Camera but it has not been tested by the either manufacture.

Q: 4. Can the unit control video function too?

A: The Lanparte LRC-02 offers a start/stop function and zoom control for video.

Q: 5. Hi, can this remote work on the Lumix S5 if anyone has tried this remote please? Thank you.

A: The LanParte LRC-02 Remote Control for Panasonic Cameras is compatible with the Panasonic S5 camera.

Q: 6. Does anyone have any idea what the payload is on these? In particular I'm wondering about the 15mm rod adapter.

A: It is very solid, that's how rosette works once it's locked in place. We have customers using this with 19mm with big Alura Zoom.

Q: 7. what is the min/max filter thickness that will work with this matte box?

A: This matte box will work with any 4 x 5.65" sized filter. The standard for such a filter is 4mm thick.

Q: 8. what's the rod size ?

A: This works with 15mm LWS rods.

Q: 9. Is there no way to close all the way? Ie fold in the sides and fold down the eyebrow?

A: When using the LanParte MB-02 matte box you would lower the top flag with the side flags on or remove the side flags. The Side flags fold to allow you to lower the top flag.

Q: 10. This came up when I set rod support to "15mm LWS". Is that correct or is this standard studio rod distance?

A: That is correct, this system is 15mm LWS.