Distribute your SDI source to up to six displays for post-production, broadcast, studio, signage, medical, or other applications using this 1x6 12G-SDI UHD 4K Splitter from MuxLab. The splitter allows you to distribute one SDI signal to up to six SDI displays. The splitter autodetects 12G-SDI, 6G-SDI, 3G-SDI, HD-SDI, and SD-SDI signals and automatically re-clocks your signal based on source and destination signal type.

Featuring one BNC input and six BNC outputs, the splitter supports resolutions up to UHD 4K60, 3840 x 2160. It supports up to eight channels of audio and can send an SD-SDI signal up to 1000', or a 12G-SDI signal up to 150' using cable rated RG-59 or better. LEDs on the front of the unit allow you to see the status of your SDI signals. The compact splitter is housed in a durable metal casing that includes connectors on the back for cable control, and it includes a 5 VDC power supply.

Distributes SDI Signal to 6 Displays    6 x 12G/6G/3G/HD/SD-SDI BNC Outputs    Supports Resolutions up to UHD 4K    Support for up to 8 Audio Channels    Front-Panel LED Indicators

• Distribute one 12G-SDI source to six displays
• Supports up to UHD 4K60 resolution, including 12G/6G/3G/HD/SD-SDI
• Automatically detects re-clocks and regenerates the 12G/6G/3G/HD/SD-SDI signal
• LED diagnostic
• Connectors on rear for neater cabling

• 12G-SDI up to 150'
• 6G-SDI up to 300'
• 3G-SDI up to 300'
• HD-SDI up to 500'
• SD-SDI up to 1000'
• RG-59 or better cable required

Related Questions and Answers

Q: 1. Are these cables shielded?

A: Yes they are. All Shieldrock coax cables are double shielded, with both a braid and a foil layer.

Q: 2. Does this splitter emulate EDID or will the two monitors fight for control of the graphics card?

A: This splitter does emulate the EDID.

Q: 3. Max length of HDMI cable supported?

A: The manufacturer does not explicitly define this specification, but we would lean on the side of caution and keep the maximum length under 25 feet.

Q: 4. I need to send the same DisplayPort signal from a PC to both a monitor and a Kramer presentation switcher. The switcher only accepts HDMI, so I will have to have a DisplayPort to HDMI adapter between this device and the switcher. Will this configuration work?

A: Yes this configuration should work.

Q: 5. Is this a shielded power cable?

A: Yes it is shielded but this is not a power cable. It is an SDI cable used for transferring video/audio signals.

Q: 6. Can it output to 2 displays of different resolution? i.e. 4K + 1080p (downscaled)

A: This product will output the resolution you input in to it, up to UHD 4K. We are not aware of it being able to send out two different resolutions.

Q: 7. What is the impedance rating?

A: Standard SDI cables are terminated with BNC connectors and have a nominal impedance of 75 Ohms.

Q: 8. I am using a Nvidia GeForce P2000 4 dp output card. I need to split one output to a DP monitor and the second output to a Blackmagic ATENOLOL mini. Both The ATEN and monitor MUST receive the EDID information. Will this work?

A: The MuxLab 1x2 UHD 4K DisplayPort Splitter does not support EDID. Unfortunately it would have to be tested to see if it was functional with your requirements. B&H does have a 30 day return period that would allow you to test it with your setup.

Q: 9. is this RG6 or RG 59?

A: it is an RG59 cable

Q: 10. This will duplicate a 4k@60 stream to two monitors at the same time, correct? Every other splitter I can find is an MST hub and can't do this.

A: According to MuxLab this splitter will duplicate identical DisplayPort 1.2a content from one DisplayPort connector to two monitors. DisplayPort 1.2a supports 3840 x 2160 pixels at 60Hz. This should send two 4K streams to both monitors.