With the indoor/outdoor UAP-AC-M-US UniFi AC Mesh Wide-Area Dual-Band Access Point from Ubiquiti Networks, users benefit from a wide coverage area reaching up to 600' along with enhanced data transfer rates of up to 867 Mb/s on the 5 GHz frequency. These enhanced data rates and coverage capabilities are supported by a 2x2 MIMO internal antenna configuration supporting multiple data paths for a more efficient end-user network connection. Installation of the UAP-AC-M-US is simple, as it comes 802.3af PoE-compliant and includes a wall/pole/fast-mount kit. Once installed, users can take advantage of 802.11ac Wi-Fi access with speeds of up to 867 Mb/s in the 5 GHz radio band, and up to 300 Mb/s in the 2.4 GHz radio band.

802.11 a/b/g/n/ac Wi-Fi Standards    Range of up to 600'    1 x 10/100/1000 Ethernet Port    UniFi Controller Software    2 x Integrated Omni Antennas    Guest Portal/Hotspot Support    Passive Power over Ethernet    200+ Concurrent Clients    Reset Button    CE, FCC, IC Certified

The UniFi AC Mesh AP is designed to discreetly integrate into virtually any environment.

The UniFi AC Mesh AP can be used indoors or outdoors.

Unique provisioning LED provides administrator location tracking and alerts for each device.

The UniFi AC Mesh AP can be mounted on a wall, pole, or you can fast-mount a Ubiquiti high-gain antenna. (All accessories are included)

The UniFi AC Mesh AP is compatible with 802.3af PoE Alternative A and 24V passive PoE. You

can power it with an 802.3af Alternative A compatible switch or the included Gigabit PoE

adapter.

Use the included omni antennas, or use the included fast-mount adapter to install the AP on an optional connectorized antenna for expanded range coverage and customized pattern shaping.

Packed with Features
Use the UniFi Controller to provision thousands of UniFi APs, map out networks, quickly manage system traffic, and provision additional UniFi APs.

RF Map
Use the RF map to monitor and analyze radio frequencies for optimal AP placement, configuration, and troubleshooting.

Powerful RF Performance Features
Advanced RF performance and configuration features include spectral analysis, airtime fairness, and band steering.

Detailed Analytics
Use the configurable reporting and analytics to manage large user populations and expedite troubleshooting.

Wireless Uplink
Wireless Uplink functionality enables wireless connectivity between APs for extended range. One wired UniFi AP uplink supports up to four wireless downlinks on a single operating band, allowing wireless adoption of devices in their default state and real-time changes to network topology.
For devices that support Plug & Play Mesh, this functionality is extended to allow multi-hop wireless uplink - so wirelessly uplinked APs can support uplink to other wirelessly uplinked APs.

Guest Portal/Hotspot Support
Easy customization options for Guest Portals include authentication, Hotspot setup, and the ability to use your own external portal server. Use UniFi's rate limiting for your Guest Portal/Hotspot package offerings. Apply different bandwidth rates (download/upload), limit total data usage, and limit duration of use.
All UniFi APs include Hotspot functionality:
• Built-in support for billing integration using major credit cards.
• Built-in support for voucher-based authentication.
• Built-in Hotspot Manager for voucher creation, guest management, and payment refund.
• Full customization and branding of Hotspot portal pages.

Multi-Site Management
A single cloud-based UniFi Controller can manage multiple sites: multiple, distributed deployments and multi-tenancy for managed service providers. Each site is logically separated and has its own configuration, maps, statistics, guest portal, and admin read/write and read-only accounts.

WLAN Groups
Manage flexible configurations of large deployments. Create multiple WLAN groups and assign them to an AP's radio.

Related Questions and Answers

Q: 1. How do I secure the open port on the AP when mounted outside? I feel this is a way for someone to hard wire connect and access my network unauthorized.

A: You could use RJ45 locking plugs. If your worried about the physical access you might need to reconsider the AP location as it can simply be disconnected and a attacker could then have a direct wire in.

Q: 2. I live with access to a guest wifi from business below the signal is pretty good but localized. Is this a help or something else from Ubiqiti....?

A: Yes the UAP-AC-M-US will extend a Wi-Fi area. It must be wired to the router. Preferably a Ubiquiti router or switch.

Q: 3. Does the second port provide POE passthrough?

A: No, the Ubiquiti Networks UAP-AC-M-PRO-US UniFi AC Mesh Wide-Area Outdoor Dual-Band Access Point does not support PoE passthrough.

Q: 4. how are the remote mesh APs powered? since they are connected wirelessly, there's no PoE. Where I need a wireless AP, theres no power, but I could use solar powered battery if there I can use an low voltage adapter to power the mesh AP.

A: A PoE adapter is included. The draw is 9w Max.

Q: 5. Is the PoE injector included?

A: The Ubiquiti Networks UAP-AC-M-PRO-US UniFi AC Mesh Wide-Area Outdoor Dual-Band Access Point comes with the PoE injector.

Q: 6. can you attach a switch to the secondary port? I am interested in daisy chaining a few APs and then placing a small network switch at the end of the line for a few hard-wired devices.

A: Yes, you can attach a switch to the secondary port on the BH #UBUAPACMPRUS.

Q: 7. How many UniFi devices can be daisy chained together?

A: The manufacturer has not specified how many of the Ubiquiti UAP-AC-M-PRO-US UniFi AC Mesh Wide-Area Outdoor Dual-Band Access Point can be daisy chained in a network.

Q: 8. I have a Ubiquiti Networks UAP-AC-PRO UniFi Access Point. Aside from its form factor and its ability to be used outdoors, how is this different?

A: The UAP-AC-Pro has two Ethernet ports versus the one on the Mesh AP. Also: - 3 antennas vs 2 - 22 dBm vs 20 dBm transmit power - 1750 Mb/s Total (2.4 GHz: 450 Mb/s and 5 GHz: 1300 Mb/s) vs 1167 Mb/s Total (2.4 GHz: 300 Mb/s and 5 GHz: 867 Mb/s) throughput

Q: 9. are these devices compatible outside the US?

A: Yes, the Ubiquiti Networks UAP-AC-M-PRO-US UniFi AC Mesh Wide-Area Outdoor Dual-Band Access Point are capable of being used outside of the US.

Q: 10. I have 3 UAP AC PRO's, but they are not getting enough signal from the main uplink. Can I use a UAP-AC-M-US as a middle hop for these? Ie. I am not clear if I can use a mesh + uplink type of setup. Thanks

A: You can use that M device with the pro account Uaps. Im assuming you link them via 802.11. I'd run one of the ac pro as a first hop. Put the M device in the middle somewhere. The system works best with the unifi gateway device and switch. A very robust system. It works very well.