With the outdoor UAP-AC-M-PRO5US UniFi AC Mesh Wide-Area Dual-Band Access Point from Ubiquiti Networks users benefit from a wide coverage area reaching up to 600' along with enhanced data transfer rates of up to 1300 Mbps on the 5 GHz frequency. These enhanced data rates and coverage capabilities are supported by a 3x3 MIMO internal antenna configuration supporting multiple data paths for a more efficient end user network connection. Installation of the UAP-AC-M-PRO5US is simple as it comes 802.3af PoE compliant and includes a pole mounting kit. Once installed users can take advantage of 802.11ac Wi-Fi access with speeds of up to 1300 Mb/s in the 5 GHz radio band, and up to 450 Mb/s in the 2.4 GHz radio band.

802.11 a/b/g/n/ac Wi-Fi Standards    Range of up to 600'    2 x 10/100/1000 Ethernet Ports    UniFi Controller Software    Integrated Omni Antennas    Guest Portal/Hotspot Support    Passive Power over Ethernet    100+ Concurrent Clients    Reset Button    CE, FCC, IC Certified

The enclosure of the UniFi AC Mesh Pro AP is designed to withstand the elements, making it ideal for outdoor deployment.

Unique provisioning LED provides administrator location tracking and alerts for each device.

Built-in dual-band omni-directional antennas deliver expanded range coverage outdoors.

The UniFi AC Mesh Pro AP can be mounted on a wall or pole. (All accessories are included.)

The primary port is for data and PoE; the secondary port is for bridging.

You can power the UniFi AC Mesh Pro AP with an 802.3af compatible switch, UniFi PoE Switch, or a PoE adapter. This pack of 5 UniFi AC Mesh Pro access points does not include PoE adapters.

Packed with Features
Use the UniFi Controller to provision thousands of UniFi APs, map out networks, quickly manage system traffic, and provision additional UniFi APs.

RF Map
Use the RF map to monitor and analyze radio frequencies for optimal AP placement, configuration, and troubleshooting.

Powerful RF Performance Features
Advanced RF performance and configuration features include spectral analysis, airtime fairness, and band steering.

Detailed Analytics
Use the configurable reporting and analytics to manage large user populations and expedite troubleshooting.

Wireless Uplink
Wireless Uplink functionality enables wireless connectivity between APs for extended range. One wired UniFi AP uplink supports up to four wireless downlinks on a single operating band, allowing wireless adoption of devices in their default state and real-time changes to network topology.
For devices that support Plug & Play Mesh, this functionality is extended to allow multi-hop wireless uplink - so wirelessly uplinked APs can support uplink to other wirelessly uplinked APs.

Guest Portal/Hotspot Support
Easy customization options for Guest Portals include authentication, Hotspot setup, and the ability to use your own external portal server. Use UniFi's rate limiting for your Guest Portal/Hotspot package offerings. Apply different bandwidth rates (download/upload), limit total data usage, and limit duration of use.
All UniFi APs include Hotspot functionality:
• Built-in support for billing integration using major credit cards.
• Built-in support for voucher-based authentication.
• Built-in Hotspot Manager for voucher creation, guest management, and payment refund.
• Full customization and branding of Hotspot portal pages.
Multi-Site Management
A single cloud-based UniFi Controller can manage multiple sites: multiple, distributed deployments and multi-tenancy for managed service providers. Each site is logically separated and has its own configuration, maps, statistics, guest portal, and admin read/write and read-only accounts.

WLAN Groups
Manage flexible configurations of large deployments. Create multiple WLAN groups and assign them to an AP's radio.

Related Questions and Answers

Q: 1. I would like to mount one on my back porch to provide wifi to my boat dock. The dock is about 300 feet away from the where I would mount the AP. Is this too far? It says 600 feet. I just didn't know if that was accurate.

A: Roughly 600' ft. is accurate.

Q: 2. I want to install a ubiquity mesh ap system that will be attached to a local IP that is radio frequency transmitted internet service. Can I use a Unifi M AP and attach via cat5 to \a switch inside a steel wall building to supply internet service to the inside of the building from the unifi mesh ap?

A: Yes but you should use a separate antenna/receiver to supply the network feed to the switch which would then be routed to feed to your mesh APs.

Q: 3. I have a Ubiquiti Networks UAP-AC-PRO UniFi Access Point. Aside from its form factor and its ability to be used outdoors, how is this different?

A: The UAP-AC-Pro has two Ethernet ports versus the one on the Mesh AP. Also: - 3 antennas vs 2 - 22 dBm vs 20 dBm transmit power - 1750 Mb/s Total (2.4 GHz: 450 Mb/s and 5 GHz: 1300 Mb/s) vs 1167 Mb/s Total (2.4 GHz: 300 Mb/s and 5 GHz: 867 Mb/s) throughput

Q: 4. Can I use this device as a repeater and plug a switch into it for wired devices?

A: Ive used the UAP AC Pros to do this. I dont see why it couldnt be done with the M.

Q: 5. Is this weather proof? I'm looking to install these on brick outside with no cover and the Mesh Pro is overkill for this installation.

A: Yes, Weather-Resistant Enclosure

Q: 6. are these devices compatible outside the US?

A: Yes, the Ubiquiti Networks UAP-AC-M-PRO-US UniFi AC Mesh Wide-Area Outdoor Dual-Band Access Point are capable of being used outside of the US.

Q: 7. Will this work with a Linksys POE switch? I do not have a unifi controller. Do I need one or can I just configure it without one?

A: It can run with a linksys POE switch as long as it has enough power and meets it poe specs. You will need to run the UniFi controller on a computer to set the unit up.

Q: 8. will they work in a freezer -15F ?

A: Yes, the Ubiquiti Networks UAP-AC-M-US UniFi AC Mesh Wide-Area Indoor/Outdoor Dual-Band Access Point BH #UBUAPACMUS has an operating temperature rating of -22 to 158°F / -30 to 70°C/ Operating Humidity 5 to 95%.

Q: 9. I am not able to mount anything on my ceiling and would have to mount to a wall. Would this produce better coverage than a Unifi UAP-AC-Pro mounted on a wall? Thanks!

A: While it is impossible to say with 100% certainty, since that will depend in a lot of outside factors, the UAP-AC-M-US does have a higher range rating than the UAP AC PRO. Real world results will vary depending on where you install it, building materials and layout, wireless interference in the area and the rest of your network components. The only real way to know for sure is to test it out. If you have any other questions, feel free to reach pc@bhphotovideo.com.

Q: 10. Is this device water resistant/proof? IP rating?

A: The Ubiquiti UAP-AC-M-PRO-US is not IP rated, but it can operate in conditions of up to 95% humidity and has been stated in user testimonials to endure harsh climates and extreme weather.