Increase the communication speeds between your SAN devices with this Celerity FC-164P Quad-Channel 16 Gb/s Gen 6 Fibre Channel PCIe 3.0 Host Bus Adapter with SFF+s from ATTO Technology. This HBA board provides your PCIe 3.0 x8-compatible device with four SFF+s for up to 6400 MB/s of total bandwidth. Utilizing ATTO's exclusive Advanced Data Streaming technology, latency is managed for consistent data transfer performance for high-bandwidth applications. If your application requires a specific performance range, you can use ATTO's ConfigTool to control, manage, and monitor the HBA's settings.

4-Channel 16 GB/s Gen 6 Fibre with SFF+s    PCIe 3.0 x8 Host Connection    Up to 3200 MB/s per Port in Full-Duplex    4 x 16 Gb/s LC SFF+ Transceivers    Works with 8 Gb/s & 4 Gb/s Fibre Devices    Supports NPIV & Virtual Fabric    Latency Management with ADS Technology    Configure & Manage HBA with ConfigTool    For Windows, VMware, FreeBSD & More    High- & Low-Profile Brackets Included

Bus Mastering eliminates the need for communicating with the host CPU of your device by transferring data directly between the HBA and the system memory. Doing this relieves the CPU from the burden of managing protocol activities and increases system bandwidth for other applications.
Tagged Command Queuing allows for multiple I/O commands to be processed in any order, improving overall performance of read and write requests to hard drives.
Disconnect/Reconnect is a feature that increases bus performance by eliminating wait times between the HBA and other devices. This can enable dynamic sharing of the bus bandwidth in sophisticated environments.
Advanced algorithms are implemented to provide optimized performance for workgroup applications such as digital content creation, rich media, prepress, and databases.

Related Questions and Answers

Q: 1. Is this compatible for HPE LTO-8 External Tape Drive?

A: Yes, the ATTO Technology ExpressSAS H1280GT Host Bus Adapter is compatible with SAS storage devices such as the Hewlett Packard Enterprises StoreEver LTO-8 Ultrium 30750 External Tape Drive.

Q: 2. Will this card run with this SSDs Western Digital WD Green, 2TB, SATA III?

A: Yes, you can connect SATA HDD and SSD's to the HighPoint RocketRAID 2840C PCIe Host Bus Adapter.

Q: 3. Can you run two separate macs (one per thunderbolt) on the same device?

A: No, unfortunately the ATTO Technology ThunderLink FC 3162 Thunderbolt 3 to 16 Gb/s Fiber Channel (US Power Cord)'s second Thunderbolt 3 port is solely for device daisy-chain support. For external drives and monitors.

Q: 4. Does it support any form of RAID ?

A: Yes, the HighPoint Rocket R1204 PCIe 3.0 x8 4-Channel M.2 NVMe Host Controller has support for OS-based RAID configurations.

Q: 5. Does this board come with the Dante card installed?

A: The Allen & Heath SQ-5 does not come with a Dante card installed.

Q: 6. What NIC chipset this adapter uses?

A: Unfortunately, ATTO does not list the chipset anywhere in their documentation

Q: 7. Low Profile Bracket included with this controller?

A: This comes with a low profile bracket.

Q: 8. What size HDD does this card support for RAID 1? I'm looking at using the IronWolf 10TB 7200 RPM NAS HDD.

A: On the datasheet for this product, the manufacture only states it supports larger HDD's than 2TB. It doesn't specify the maximum size. Sorry for any inconvenience. https://bit.ly/2yYp2rn As far as compatible HDD's, the manufacture doesn't list Seagate IronWork HDD as a compatible option. The compatible HDD's are shown below: https://bit.ly/2NblCKd

Q: 9. china?

A: Yes, this product is manufactured in China.

Q: 10. Does this transceiver work with the ATTO Fastframe NS11?? Why this and not the one that costs 423$ or the one that costs 297$? (there are three trnasceivers from ATTO in B&H pages. Is ther any difference for us planning to buy and use a FFNS11?? many thx, Jesus Haro

A: This is compatible with a FastFrame NS11 LC adapter using a LC to LC cable. The two receivers that we offer on our site are different speeds. 8Gb/s vs 16Gb/s.