The GS5313GS Geared Center Column from Gitzo is an aluminum center column designed for use with series 5 Systematic tripods. The column may be installed by removing the tripod's base plate, inserting the center column, and locking the column in place.

The primary feature of the GS5313GS is its geared mechanism, which allows the user to make incremental vertical adjustments with the use of an integrated cranking handle. When the desired height is reached the user may then use the disc-lock equipped central collar to lock the column in place.

The column features a native height of 18.5" which includes 11.8" of travel distance from maximum height to minimum height. It weighs 3.3 lb, a manageable weight which compliments its professional quality and durability.

Height: 18.5"    Travel: 11.8"    Weight: 3.3 lb    Aluminum Construction    Geared Handle for Incremental Adjustment    Central Disc Lock    Ballast Hook

Related Questions and Answers

Q: 1. Will this fit the Gitzo 3542LS Mountaineer Series 3

A: GT3542LS is a Systematic, not a Mountaineer, so I'm assuming you meant GT3542L.As Mark said, this is for the Systematic tripods only.

Q: 2. will this fit Gitzo 1548 MK II?

A: The Gitzo GS5313GS Geared Center Column for Series 5 Systematic Tripods is not compatible with the Gitzo 1548 MK II tripod. It's compatible with the following tripods: Gitzo GT3531LSV Gitzo GT5531S Gitzo Series 5 Systematic GT5533L Gitzo Series 5 Systematic GT5533S Gitzo Series 5 Systematic GT5543LS Gitzo Series 5 Systematic GT5543XLS Gitzo Series 5 Systematic GT5563GS.

Q: 3. Does this column allows vertical positioning without movement/rotation in the horizontal plane? Is the composition as viewed in the camera viewfinder affected in the horizontal direction when the crank is rotated? I plan to use the column with a systematic 3 tripod for product photography (but not macro), the idea would be to adjust the height without having to have to re-compose or re-focus afterward.

A: The Gitzo GS3313GS Geared Center Column for Series 3 and 4 Systematic Tripods is a geared column and moves up and down. It does not move side to side horizontally.

Q: 4. Can the column be reversed to allow between-the-legs geared motion?

A: No. But you can mount a tripod head to both ends of the column, which makes reversing unnecessary.

Q: 5. Will this item fit a gitzo 4330LS?

A: Yes, this column is compatible with the Gitzo 4330LS tripod.

Q: 6. What is the diameter of the carbon fiber tube?

A: The Gitzo GS3513S Rapid Center Column for Series 2, 3, and 4 Systematic Tripods have a diameter of 32mm.

Q: 7. What is the lifting weight capacity rating for this center column when mounted on a Gitzo series 5 long carbon fibre tripod?

A: The load capacity for this column is 55 lbs.

Q: 8. I wish to add this item to my GT3530LS tripod. What size hex key do I need to remove and replace top plate?

A: With the extensive research I have done, the bolt is a torx screw and needs a T25 torx bit or you can purchase a set that includes a T25.

Q: 9. Since the crank handle on this geared center column is below the tripod’s platform, does the handle completely clear the legs when cranking it?

A: Yes, the crank goes between the legs and clears them when cranking.

Q: 10. Can this be inverted for low angle shooting? Thanks!

A: Hello Eric - Yes! At the the bottom of the column is a small hook for hanging a sandbag...you will need to unscrew this first to remove the column. Once removed, simply loosen the collar, pull out the column and reinstall in the upside-down position. I would suggest reinstalling the sandbag hook to prevent the column from sliding though the collar while upside down.