Record Instrument Db Range

Cabletronix Cta-35/1000pr Catv Distribution Amplifier

Product Code: ga37213
Availability: In Stock

$455.97 $729.55

Qty

1 reviews Write a review

Description
Reviews (1)

The CableTronix CTA-35/1000PR CATV Distribution Amplifier is a wall-mountable amplifier with a 16 dB gain-control range. In addition to CATV signals, this amplifier is also compatible with UHF and VHF signals. Built-in input and output test ports ensure that you can adjust the amplifier to fine-tune performance without disconnecting it from your infrastructure.

35 dB Forward Gain 54-1,000 MHz Forward Bandwidth 5-42 MHz Reverse Bandwidth Passive Return Path Forward Gain and Slope Control 16 dB Forward Gain Control Range

Parameters
Frequency Range	Forward: 54 - 1,000 MHz Reverse: 5 - 42 MHz
Power Requirement	117 VAC, 60 Hz
Forward Path	Gain: 35 dB @ 54-550 MHz, 34 dB @ 551-1,000 MHz Flatness: ±1.0 dB @ 54-870 MHz Gain Control Range: 16 dB Tilt Control Range: 15 dB Noise Figure: 6 dB @ 54-1,000 MHz Return Loss: -10 dB Input, -10 dB Output Composite Triple Beat: -60 dBc Composite Second Order: -60 dBc Input Test Point: -20 dB ±3 dB Output Test Point -20 dB ±3 dB
Return Path	Gain: -2.5 dB Flatness: ±1.0 dB Noise Figure: 6 dB Return Loss: -10 dB Input/Output
Operating Temperature	14 to 131°F / -10 to 55°C
Connectors	F Type female
Impedance	75 Ohms
Dimensions	8.9 x 5.3 x 2.1" / 225 x 135 x 52 mm
Weight	3 lb / 1.4 kg
Packaging Info
Package Weight	2.65 lb
Box Dimensions (LxWxH)	9.45 x 6.15 x 2.3"

Related Questions and Answers

Q: 1. Can this be used for Time Code Distribution?

A: This can be used to distribute tri-level sync, but not time code specifically.

Q: 2. I need to input from a 4K directv receiver and output in 4K to my 4k Sony TV and in 1080i to my HD TV. Will this work?

A: Yes, you choose wisely.

Q: 3. Are the outputs isolated from inputs and are all the outputs isolated from each other?

A: Yes

Q: 4. what is the max. distribution distance ?

A: An HDMI signal travelling over a standard HDMI cable with no built in signal booster will generally have a distance of 50 feet.

Q: 5. Is this using HDbaseT or simply conductor to conductor?

A: This unit is conductor to conductor.

Q: 6. can this unit work on a tascam 2488 neo and if so what is the best way to connect it to the unit for the best results on all the channels?

A: The Behringer HA8000 can be connected to the Tascam 2488 NEO. The MONITOR OUTPUT would be the proper way to connect the unit.

Q: 7. When switching is there a delay on the output while it re-syncs? Or is it seamless and instantaneous?

A: Never mind. This unit doesn't switch. Duh.

Q: 8. What is the reason for two power inputs?

A: The AVMATRIX SD1151-12G 12G-SDI 1x5 Reclocking Distribution Amplifier has two power inputs for power back up redundancy.

Q: 9. How far can this push a signal per output? Is there model that does 100?

A: An HDMI single in general only can go around 35 feet before the signal degrades. The first option you would have is to use a unit like this with HDMI extender kits that work with Ethernet cables. A second option is to purchase a DA that outputs HDMI over Ethernet right out of the box. Kramer makes such a DA that has 4 HDMI outputs and works with Twisted Pair Receivers, those also use Cat6 cables.

Q: 10. How to get more me function

A: The HA 8000 features 8 independent headphone amplifiers. You are able to select one of two available stereo inputs to the unit. There is also a direct in available on each of the 8 amps which will take priority to that input when connected. You are only able to adjust overall level of the selected in (main 1, or main 2).

William	17/04/2024
My CATV/Internet source goes into a 3-way splitter. Its 3.5 dB output is connected to a 4-way splitter. Several TVs connected to the 4-way have problems with certain channels. I am certain the problems are due to signal strength since they work fine when connected to the 3-way. I added this amp between the 3.5 db output and the input of the 4-way. Problem solved. 5