The Washed Chevron Matte Vinyl Backdrop with Grommets from Westcott is a 5 x 7' backdrop with a printed, vintage red washed chevron pattern. This size backdrop is suitable for full body shots, couples, and groups. It is easy to wipe clean if it gets wet or is spilled upon, which makes it useful for when you are working with food or liquids.

The backdrop incorporates five grommets, three along the top and two along the bottom, and can be paired with Westcott's X-Drop frame (not included) for hanging. Additional grommets (not included) can be added if you wish to expand your hanging possibilities. The backdrop presents a matte finish, while the printed design lends a high-end look to your photographs. It ships to you rolled in a tube.

Matte Finish    Suitable for Food and Liquid Photography    5 x Integrated Grommets    Printed Washed Chevron Pattern

This vinyl background features a washed chevron pattern in vintage red and has a matte finish

The vinyl surface is convenient for when you are working with food and liquids; as it is easy to clean

The backdrop comes with three grommets in the top and two grommets in the bottom

Large enough for full body shots, or small groups

Related Questions and Answers

Q: 1. How many photos does it hold?

A: It has 50 top loading pages which can hold up to 100 4x6 photos.

Q: 2. Can this be used for an iPF8100?

A: Yes, I've used it in our iPF8100.

Q: 3. what's the temperature rating before it will peel?

A: These are it's operating specs: Operating Temperature 59 to 86° F (15 to 30°C) Operating Humidity 25 to 75% RH (non-condensing) Within these ranges it will last up to 6 months outdoors.

Q: 4. I'm getting sagging wrinkles in mine. It's hanging from an Impact wall mounting kit but weather I'm hanging just enough so it's not touching the floor, or pulled all the way out so it's covering the floor and wall, I still get sagging wrinkles. Fortunately these aren't showing up in the photos as I'm blowing out the background, but they definitely would show up if I weren't. I tried clamping the edges to a C-stand to pull it taught and that helped a bit but it would have taken several clamps to get it fully clean. Am I doing something wrong, or is this normal, or ? Thanks!

A: I use mine only to blow out the background - not gray yet. I have only noticed my crossbar sagging ever so slightly - if I changed the light setup to get gray I don't feel the amt. of sagging would be a problem for me. I can't tell you that you are doing anything wrong - just share what I have done/experienced. My guess is your cross bar is not strong enough. I do use clamps to pull a different colored canvas more tight but not the white vinyl - works-ish but is a pain (I feel your pain). I use the photoflex background holder and keep it as close to 9' wide as possible (9' + couple inches. This crossbar system isn't perfect for other reasons, but what is, right?) I did see a photo of a photogs setup where he used a length of wood as his crossbar held up by 2 stands - no sagging at all. I also wonder if your stands are a lot more than 9' apart causing more sag. I have left mine on the cardboard core. One last thought: If mine did sag and that showed in the resulting photos I'd be tempted to put an extra stand in the middle, behind the background to hikeup the center just a touch . . . maybe with a speedlight foot on the top as not to damage the roll . . . does any of this help? I love this backdrop -- all the best!

Q: 5. How long is this roll pulled all the way down? I understand its 5' by 7' but how long is the roll?

A: It is 5 feet wide by 7 feet long.

Q: 6. outdoor?

A: Yes this can be used out doors. We spray our final product with a UV Coating spray. It helps seal the print and helps protect.

Q: 7. Is it fully opaque? If I place over the top of other artwork will I see any trace of it?

A: No! It's totally white, not see-through.

Q: 8. Best economical way to temporarily hang a wall? Velcro? hooks in drywall? thanks!

A: My DIY material background hanging system consists of eye bolt screwed into opposite walls using wall anchors. I then string two strands of picture hanging wire; starting with one bolt, looping through the other, and then back to the first and securing. I use the binder clips (medium or large) - the things that are used to clip a stack of papers together. I place the clip over the wire and clip the background ever 6 - 8 . I have 2 or 3 backgrounds on each wire. I simply slide the background that I want to use into position. I have 3 wires to hold all my material backgrounds. They remain wrinkle free; very easy to change. I also installed stretchers (adjustable Velcro with alligator clips) on both walls - just thumb tacked - to make the material taught.

Q: 9. Is this compatible with iPF780 poster maker printer?

A: Yes, this paper will work with the ipf780.

Q: 10. Will this work with the epson t5270 and its pigment based inks?

A: No, the HP Permanent Adhesive Vinyl (Matte, 36" x 150' Roll) is not compatible with standard inkjet printers.