This Wooden Camera LEMO Cap is a replacement for the connector cap included with the RED right-angle LCD cable. It also fits any right-angle 1B LEMO-type connector.

For RED Right-Angle LCD Cable    Fits Any 1B LEMO-Type Connector

Related Questions and Answers

Q: 1. What are the two proprietary cable ends listed? The input is a 2-pin. Does the other end need a 2-pin lemo (f) output from a battery source?

A: The Wooden Camera Extension Power Cable for RED KOMODO has a 2 pin lemo connector on each end. One to connect to the camera and the other to your power source like the Komodo power supply https://bhpho.to/3CHVrlW

Q: 2. It seems as if the description is incorrect. Timecode cable is not a Fisher connector usually but BNC or similar. Is there a mix up?

A: On the RED KOMODO, the 9-Pin Extension port carries the Timecode signal. If you need BNC for Timecode, get the RED DIGITAL CINEMA KOMODO Expander Module. https://www.bhphotovideo.com/c/product/1570780-REG/red_digital_cinema_720_0058_komodo_expander_module.html?sts=pi&pim=Y

Q: 3. Will this support Panasonic GH5 4k, 10bit, 60p?

A: Not that we are aware of. The Pocket Cinema Camera 4K's HDMI output it HD only. It is unlikely this adapter will be rated HDMI 2.0 for 4K 60fps.

Q: 4. Is this a 2-pin Male? Is it also compatible with a SmallHD Ultra 5?

A: The Wooden Camera D-Tap to RED KOMODO is a 2-pin female LEMO. This adapter if used incorrectly on a product not meant for it, may burn out and cause a failure to the wrong system being powered.

Q: 5. Regulated?

A: The Wooden Camera D-Tap to RED KOMODO (36", Inward Right Angle) has no voltage regulator.

Q: 6. Will the inward facing right angle connector block access/use of the Komodo SDI port?

A: The Wooden Camera D-Tap to RED KOMODO (36", Inward Right Angle) will not block the 12G-SDI port on the RED DIGITAL CINEMA KOMODO 6K Digital Cinema Camera (Canon RF).

Q: 7. Will this work with the RED V-Raptor?

A: The Wooden Camera D-Tap to RED KOMODO (36", Inward Right Angle) (B&H# WO281100) features a 2-pin connector for power delivery to the RED KOMODO. The power connector to the RED DIGITAL CINEMA V-RAPTOR 8K VV DSMC3 Camera (Canon RF, Black) (B&H# REVRAPTOR) is proprietary and requires several more pins. They are incompatible.

Q: 8. Can you directly power the Z Cam E2 S6 using this cable from the DC 12v input into a vmount battery?

A: Yes, you will be able to use the CAMVATE D-Tap To 2 Pin Right Angle Coiled Power Cable to power your Z Cam E2 S6 since this camera has a 2-Pin LEMO (12 VDC) Input.

Q: 9. Will this work with the new Z CAM 2.89" EVF101 Electronic Viewfinder?

A: Yes, the Z Cam EVF101 takes a 2 Pin Lemo 0B, such as that on this Camvate D-Tap to Right Angle 2-Pin LEMO Cable.

Q: 10. Will this work on my Red Raven (which has a DSMC2 V-Lock I/O Expander)?

A: The manufacturer defines one of these connectors as "proprietary" thus we recommend using a cable that has been tested and approved for the Raven with I/O expander: https://bhpho.to/2IoMjuX