Designed to eliminate the extra step of finishing the screen with trim, the 220V 21809EBLSI Tensioned Advantage Electrol 65 x 104" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Note: This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 21809EFLSI.

123" Diagonal / 16:10 Aspect Ratio    HD Progressive 0.9 Screen Surface    0.9 Gain / 170° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Box Only (No Screen Fabric)    Silent Motor    Video Projector Interface

Ideal for moderate to high output projectors, the light gray surface provides balance between color reproduction and image contrast. Cone: 170° Gain: 0.9

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Can I use this with a sennheiser mke2 lave mic that needs 7.5v?

A: Yes, the Track E can be used with a Sennheiser MKE 2 or most any lav with a 3.5mm connector.

Q: 2. Can you use the app to rename the filenames of the recordings?

A: You cannot rename the files in the app but you can name the devices in the app.

Q: 3. When I don't want to record audio with the Track E, is it possible to use it with other Sync E's like a Sync E to inject TC into my DSLR via the camera's mic input?

A: No, the Track E does not output timecode so it cannot function like a Sync E to inject timecode into a DSLR..

Q: 4. If I use a Tentacle with a Zoom H6, recording the timecode audio in one channel and at the audio output of the H6 I connect it to a camera via 3.5mm. Can post-production synchronize the timecode audio generated by the Tentacle of the h6 and the camera?

A: The Zoom H6's line output downmixes all channels to stereo. The only way to preserve isolation would be to record your timecode and audio as a stereo channel, with each panned hard left/right.

Q: 5. Can I use a time code sync as well as a mic/recorder? Like the sync-e. Dual function

A: No, the TRACK E works via Bluetooth with the Tentacle Setup App. You can change the settings, sync it with other Tentacles or start and stop the recording wirelessly. It can also get jam-synced by external Timecode source. But it doesn't give the signal out! So it cannot replace a Tentacle SYNC E.

Q: 6. Will this also be offered with a TA4 Connector? I've only seen a Sennheiser connector mentioned.

A: Yes, you can jam-sync the Tenatcle TRACK E from an Original Tenatcle via the 3.5mm TRS cable.

Q: 7. Can tentacle sync send lavaliere audio to camera?

A: No, the Tentacle Sync Trak e is only capable of recording audio to its internal memory. It cannot send audio wirelessly to other devices.

Q: 8. Just got this. If it records mono only, can I input a TRS connector without damaging the unit? Does it use Tip and Sleeve only?

A: The Tentacle Sync TRACK E Pocket Audio Recorder does use a locking 3.5mm TRS connector and it will record one track with audio on both the left and right sides. The included lavalier microphone has a locking 3.5mm TRS connector which provides dual mono audio (same audio on the left and right sides), which is the standard wiring configuration used for most microphones with a 3.5mm TRS connector.

Q: 9. Hello, I would like to know if the Tentacle Sync TRACK E can be synchronized with the Tentacle Sync Sync E to work with the time code?

A: Yes, the Tentacle Sync Track E can be synchronized with the Sync E which generates timecode and functions as a master clock..

Q: 10. Can I use RODE Lavalier GO Omnidirectional Lavalier Microphone? I one 2 of them already. it does not have Thread

A: The Tentacle Sync TRACK E requires a lavalier with a Sennheiser-style locking 3.5mm connector. A non-locking 3.5mm connector will not be compatible.