Designed to eliminate the extra step of finishing the screen with trim, the 220V 21809EFLSI Tensioned Advantage Electrol 65 x 104" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Note: This screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 21809EBLSI.

123" Diagonal / 16:10 Aspect Ratio    HD Progressive 0.9 Screen Surface    0.9 Gain / 170° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Silent Motor    Video Projector Interface    Fabric, Roller, Motor Only

Ideal for moderate to high output projectors, the light gray surface provides balance between color reproduction and image contrast. Cone: 170° Gain: 0.9

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

This screen comes with the screen fabric, roller, and motor only, meaning the box must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Can this be carried in a 28 suitcase if taken out of the box? What are the actual dimensions?

A: Straight out of my box, it measures about 35 in.from end to end. Somewhat similar to a large umbrella. When opened it is 28 28. across. Height is approximately 24 in. when standing on a surface in an open position, dome downward.

Q: 2. Would this work nicely on the AD600 and AD200?

A: This Medium Apollo will pair nicely with the AD200. I would suggest using it with the bare bulb in a rear facing position to maximize the spread of light in the modifier. The size of the AD600 and therefore the fit inside the box may not make it ideal unless you use the accessory H600b remote head.

Q: 3. How do you remove the foam?

A: It is just a sift foam disc. Just pinch it between your fingers and pull gently. Great little vac with awesome power

Q: 4. Are there any CFL fixtures that will work with this? Looking for this to pull double duty for stills as well as video. I know the D5 will fit in the orb, looking to put a continuous light in here as well.

A: From Westcott's Apollo product description The 28 Apollo can be used with flash, fluorescent sources or hot lights up to 500 watts .

Q: 5. What does three pronged european plug mean exactly? A grounded schuko or a flat pronged uk plug?

A: Mine was a two prong schuko, not three prong

Q: 6. Can I use with Amaran COB 60d?

A: The Aputure Light Storm LS 60x Bi-Color LED Light BH #APLS60X does not have an umbrella port so it cannot be used with an apollo softbox which mounts via an umbrella shaft.

Q: 7. What is the difference between this and B&H # MEED500 MFR # ED-500?

A: Hi,B&H # MEED500 MFR # ED-500 with 120v is roughly for use in North and Central America, Western JapanThe other model is intended for use in territories requiring 220V (not for use in the US). It comes with a three-pronged European plug. That is the only difference.

Q: 8. Will this work in USA as well as Europe? Is it a switching power supply? VS the regular 110v model?

A: Hi. No switching supply in this model. For US is 110v, for EU 220v, but no more difference.

Q: 9. can i use this soft box with my spyderlight td6?

A: The TD6 is not a good combo with the 28 due to the size and configuration of the head which may cause the lamps to come in contact with the Modifier. The Apollo Orb kit or the JS Apollo with an added medium to heavy duty stand will work with the TD6 but the shallow soft boxes designed for use with the TD6 heads is the ideal combination.

Q: 10. Where is the Think Tank laptop sleeve that fit into the front of this case?

A: The laptop sleeve is built into the front of this case, it is accessed by the flap on the front of the bag.