Designed to connect an on-camera shotgun mic to a camera or audio field gear, the durable Cable Techniques Coiled Jumper Cable Low-Profile XLR 3-Pin Female to XLR 3-Pin Male is a custom-made coiled cable, which extends from 6 to 15". Up to 40% lighter than standard XLR cables, it features low-profile XLR connectors with adjustable, cable-outlet orientation, ideal for keeping your audio-bag setup clean and organized.

You can adjust the cable outlet angle from 30 to 150° and 210 to 330°, to better suit whichever device you're hooking into, be it a Sound Devices unit (the 633, 688, 788T, 302, and 552, for example), a Zaxcom device, a piece of Zoom gear, or other such location-audio kits.

The connectors' precision-cast shells feature a matte, non-reflective black finish and gold contact pins. For maximum impact resistance and toughness, the custom caps are made of injection-molded ABS thermoplastic. Should you need to customize your color profile, the interchangeable caps are offered in ten different colors (available separately).

Durable, Custom-Made Coiled Cable    For On-Camera Mic & Other Field Gear    Extends from 6 to 15"    Lightweight at 2 oz    40% Lighter than Standard Cables    Multi-Position, Side-Exit Connectors    Gold Contact Pins    Interchangeable Caps

• Custom-made jumper cable—extends from 6 to 15"
• For use with on-camera shotgun mics and other field gear
• Low-profile connectors reduce weight of rig and allow for highly organized setups
• 40% lighter than standard cables
• Multi-position, 90° side-exit connectors—set the cable orientation from 30 to 150° and 210 to 330° to accommodate typical field-gear panels
• Durable construction—custom caps made of injection-molded ABS thermoplastic for maximum impact resistance and toughness
• Custom, precision-cast shells with matte, non-reflective black finish
• Gold contact pins
• Pin-1 tied to shell on both connectors
• Easy to repair in the field
• Interchangeable color caps (10 different cap colors available separately)

Related Questions and Answers

Q: 1. Since these cables are not Shielded, are there known issues with EMI and RFI Noise with them?

A: The cabling used to assemble the Cable Techniques Low-Profile, 3-Pin XLR Female to 3-Pin XLR Male Adjustable-Angle Cable typically implements either a lap or braided shield and does not have any known issues with EMI or RF noise.

Q: 2. is it attachable with Ambient Recording QAT-ECO?

A: The Ambient Recording QAT-ECO should be able to fit just below the colored cap on the XLR connector.

Q: 3. On the XLR end, does the blue cap rotate so you can change the angle at which the wire comes out of it?

A: The Cable Techniques Right-Angle Locking 3.5mm TRS to Low-Profile XLR Male Coiled Cable for Sennheiser features a right-angle XLR connector. The angle of the connector cannot be adjusted, it is only 90 degrees.

Q: 4. is the head type/angle adjustable on these cables? I'm looking for a 3 o'clock head on the male and a 12 o'clock head on the female.

A: It does not appear that the connector orientation on the Cable Techniques 10'Low-Profile Right-Angle XLR-3F to XLR-3M Mic/Patch Cable (Black Caps)Mogami W2549 Cable is adjustable. The XLR connectors used appear to be one solid component without the ability to unscrew and reorient.

Q: 5. Can the cable be turned to exit the opposite side of the connector?

A: No the Cable Techniques Mini TRS to XLR Male Low-Profile Wireless Output Cable (18"), can not be turned to exit the opposite side of the connector.

Q: 6. Will this work with a Movo WMIC80 Receiver?

A: Yes, the Cable Techniques Mini TRS to XLR Male Low-Profile Wireless Output Cable can be used with the Movo Photo WMIC80 Wireless Lavalier Microphone System since the receiver uses a 3.5mm TRS male locking connector.

Q: 7. Would this fit the Deity Connect dual receiver? Been trying to find right angle connectors like this with locking screws for my kit.

A: Yes it will.

Q: 8. Is this cable balanced?

A: No, the Cable Techniques CT-MIN-LPUOX-18 is an unbalanced cable.

Q: 9. Will this work on the Sony transmitters like the D21? I know the polarity of the mic inputs is different to Sennheiser but not sure about the outputs.

A: It is not recommended to use the Cable Techniques Mini TRS to XLR Male Low-Profile Sennheiser Wireless Output Cable (18") with Sony receivers.

Q: 10. how can this cable be compatible with both sony uwp-d and Sennheiser ew500? I own both so this would be aa good solution. Please explain.

A: The 1/8'' connector would screw into the receiver on your wireless system.