The Mystic Pattern Matte Vinyl Backdrop with Grommets from Westcott is a 5 x 7' backdrop featuring a printed white mystic pattern on a orange background. This size backdrop is suitable for full body shots, couples, and groups. It is easy to wipe clean if it gets wet or is spilled upon, which makes it useful for when you are working with food or liquids.

The backdrop incorporates five grommets, three along the top and two along the bottom, and can be paired with Westcott's X-Drop frame (not included) for hanging. Additional grommets (sold separately) can be added if you wish to expand your hanging possibilities. The backdrop presents a matte finish, while the printed design lends a high-end look to your photographs. It ships to you rolled in a tube.

Matte Finish    Suitable for Full Body Shots and Groups    5 x Integrated Grommets    Printed Mystic Pattern

This vinyl background features a white mystic pattern against orange, with a matte finish

The vinyl surface is convenient for when you are working with food and liquids; as it is easy to clean

The backdrop comes with three grommets at the top and two grommets at the bottom

Large enough for full body shots, or small groups

Related Questions and Answers

Q: 1. Is it 'see-through'? Can I use it outdoors?

A: No, it's not see-through ....not transparent or translucent. I've used mine outdoors many times. Works great for keying, especially with the subject 3-4 feet in front of it.

Q: 2. In the featured image, you can see the texture of the vinyl. How far does the subject need to be away so that it just looks completely smooth in the background? I understand this will vary based on things like f-stop etc.

A: Position your subject around 6' in front of the background

Q: 3. I'm getting sagging wrinkles in mine. It's hanging from an Impact wall mounting kit but weather I'm hanging just enough so it's not touching the floor, or pulled all the way out so it's covering the floor and wall, I still get sagging wrinkles. Fortunately these aren't showing up in the photos as I'm blowing out the background, but they definitely would show up if I weren't. I tried clamping the edges to a C-stand to pull it taught and that helped a bit but it would have taken several clamps to get it fully clean. Am I doing something wrong, or is this normal, or ? Thanks!

A: I use mine only to blow out the background - not gray yet. I have only noticed my crossbar sagging ever so slightly - if I changed the light setup to get gray I don't feel the amt. of sagging would be a problem for me. I can't tell you that you are doing anything wrong - just share what I have done/experienced. My guess is your cross bar is not strong enough. I do use clamps to pull a different colored canvas more tight but not the white vinyl - works-ish but is a pain (I feel your pain). I use the photoflex background holder and keep it as close to 9' wide as possible (9' + couple inches. This crossbar system isn't perfect for other reasons, but what is, right?) I did see a photo of a photogs setup where he used a length of wood as his crossbar held up by 2 stands - no sagging at all. I also wonder if your stands are a lot more than 9' apart causing more sag. I have left mine on the cardboard core. One last thought: If mine did sag and that showed in the resulting photos I'd be tempted to put an extra stand in the middle, behind the background to hikeup the center just a touch . . . maybe with a speedlight foot on the top as not to damage the roll . . . does any of this help? I love this backdrop -- all the best!

Q: 4. Hi,Is this some kind of a film or what?

A: It is vinyl sheeting of probably 6mil+ thickness. It is not a thin film. Think more like a fabric shower curtain.

Q: 5. Is this unit a good choice for use with Mackie HR824 (active) connected to a PC?

A: The Genelec 9000A Stereo Volume Control is really intended for Genelec monitors. It should work with your Mackies with a Y cable. 3.5mm male to two male B&H # HOYCRTRSP10. The 3.5mm male connector on the Genelec 9000A goes into the 3.5m output from your computer. Then the 3.5mm male of the Y cable goes into the female input of the Genelec cable. Then take the two male connectors and plug them into your speakers.

Q: 6. Can this be used for an iPF8100?

A: Yes, I've used it in our iPF8100.

Q: 7. Will this paper work with a sublimation printer with sublimation ink?

A: The Canon Adhesive Matte Vinyl is only compatible with Canon inkjet printers. It is not meant for use with other ink types.

Q: 8. Can I use this paper on a DesignJet z6800?

A: No, the HP Permanent Adhesive Vinyl (Matte, 60" x 150' Roll) is not compatible with the HP DesignJet Z6800.

Q: 9. Is this comparable to cling vinyl, or is it more like a sticker? Looking for something that will cling to a wall or a window that I can remove and replace as needed...

A: Feels pretty permanent-not a cling

Q: 10. Does this paper scratch easily? We are currently using the Inkpress Adhesive Vinyl and it is not very scratch resistant at all.

A: The vinyl is very durable and holds up well against bumps and bending.