Vertical Monitor Wallpaper 1920 1080

Lilliput Rm-1730s 17.3" Full Hd 3g-sdi/hdmi Pullout Rackmount Monitor (1 Ru)

Product Code: ga38102
Availability: In Stock

$3,897.00 $6,157.26

Qty

2 reviews Write a review

Description
Reviews (2)

The LILLIPUT RM-1730S 17.3" Full HD 3G-SDI/HDMI Pullout Rackmount Monitor features a 16:9 IPS panel and offers a maximum resolution of 1920 x 1080p60. It offers a brightness rating of 300 cd/m², contrast ratio of 700:1, and viewing angles of 178°. The monitor comes with a host of functions including cross conversion, timecode, pixel zoom, vectorscope, waveform, level meter, peaking, false color, histogram, exposure, check field, color bars, and Image flip. Its 1 RU design allows it to be easily integrated into a studio or post-production rackmount setup.

Key Specs
Display Size	17.3" / 44.0 cm
Native Resolution	1920 x 1080
Power Consumption	32 W
Display
Panel Type	LCD
Display Size	17.3" / 44.0 cm
Screen Area	15 x 8.45" / 381.89 x 214.81 mm
Native Resolution	1920 x 1080
Aspect Ratio	16:9
Viewing Angle	Horizontal: 178° Vertical: 178°
Maximum Brightness	300 nits / cd/m²
Contrast Ratio	700:1
Image Controls	False Color, Waveform, Color Temperature Selection, Image Freeze, Underscan, Screen Markers, H/V Delay, Focus Peaking
Inputs / Outputs
Audio I/O	1x 1/8" / 3.5 mm Headphone Output
Built-In Speaker	Stereo
Power
Input Power	15 VDC at 2.5
Power Consumption	32 W
General
Operating Conditions	32 to 122°F / 0 to 50°C at 0 to 80% Humidity
Storage Conditions	-4 to 140°F / -20 to 60°C
Dimensions	19.9 x 19 x 1.7" / 50.55 x 48.26 x 4.32 cm
Weight	18.95 lb / 8.60 kg
Packaging Info
Package Weight	25.15 lb
Box Dimensions (LxWxH)	26.1 x 23 x 5.2"

Metal housing with pullout drawer for protection from shocks and drops

Monitor powers off automatically when screen is down and pushed in

Signal cross conversion from SDI to HDMI, and from HDMI to SDI out

Supports various methods of mounting for use in broadcast, on-site monitoring, and live broadcast vans

1 RU rackmount design

Related Questions and Answers

Q: 1. Does this support both level-A and level-B 3G signals?

A: Yes it does.

Q: 2. Does this have a blue only calibration mode?

A: Delvcam 17.3" 1080p 3G-SDI/HDMI Rackmount LCD Monitor does allow you to adjust the color temperature, and you can create a "blue only" color temp by adjusting settings, there isn't a blue-only calibration mode per se with this monitor. You would need to remove the red and green from the image manually to achieve a blue-only image.

Q: 3. Will this fit in a SKB Shallow Rack that has a Rail-To-Rail Depth of 10.7?

A: Yes, it fits for the monitor.

Q: 4. What portable rack case has enough depth to fit this monitor?

A: The Lilliput RM-1730S 17.3" Full HD 3G-SDI/HDMI Pullout Rackmount Monitor is always been installed on the buttom of a rack monitor which sit on the table .

Q: 5. Is this monitor HDCP compliant?

A: Feelworld does not list HDCP compliance in their specs for the FeelWorld T51-H Triple 5" 2 RU HDMI Rackmount Monitor.

Q: 6. does the zoom function appear on the hdmi output?

A: Not that we are aware of. The outputs on this monitor are loop-through outputs only and should only display what you input in to the unit originally.

Q: 7. Hello, Can you please tell me if this monitor will fit in a standard 19" depth ATA case or does it require a 20" depth ATA case?

A: The dimensions of the Lilliput RM-1731 17.3" Pullout Rackmount HDMI Monitor are 19 x 1.7 x 20", so you will need more space.

Q: 8. Does this product cross convert sdi to hdmi?

A: According to manufacturer notes, this does not cross convert signals, it just allows loop throughs on each individual protocol.

Q: 9. does the zoom function work on the hdmi output of this monitor?

A: We're afraid not. The output is listed as a loop-through which will output only the signal you input to it.

Q: 10. Does this unit have waveform?

A: No, The Feelworld T51 does not support waveform. 4. Special Features: * Peaking Focus Assist (Red highlight over parts of the monochrome image in focus) * Check Field (Red, Green, Blue, Mono) * Pixel to Pixel * Center Marker * Safe Marker (80%, 85%, 90%, 93%, 96%, 2.35:1) * Image Flip (Horizontal, Vertical, Hor&Ver) * Image Freeze * Zoom All * U/D & L/R Zoom * Custom Color Temperature

Tom	14/08/2024
I spent a lot of time looking for a 17 field monitor to replace my dated Panasonic LH17. This newly released Lilliput fit the bill perfectly, and does so much more than expected. I often DP multiple camera shoots and love the 4 SDI inputs. You can cycle through them full screen, or get them in quad mode - even if you are using only two or three of the inputs. The manual is nearly useless (like most these days), so took me a little bit of back and forth with tech support (very responsive), to figure out how to set that up. I then assigned quad mode to one of the function buttons. The colors seem accurate, it's bright, and it is loaded with onscreen tools, built in LUTs, the ability to bring in custom LUTs. I do not recommend their case. I kitted out a Pelican 1600 and it fits perfectly. Very happy with this monitor so far! 5

Brian	06/08/2024
Things I Love: True 4k at 18 inches that is sharp! Gets bright enough to use on set (ours living strictly in post production usage) hard carrying case is sweet, Wouldn't sit on it but definitely a nice add-on has hdmi input to switch to being a regular monitor in addition to running SDI from an UltraStudio 4K Mini out of resolve, one of the reasons for picking this over more common reference monitors. But now the tough part, Calibration was HARD. Keep in mind I am not a professional calibrator but am pretty tech savvy, Spent a whole day trying with DisplayCal, next day with ColourSpace LTE Rental, and simply couldn't get great results. Results would be great when testing the calibrated profile from a software side, but as soon as loading the LUT into the monitor, results would be all over. Lilliput Customer Service was very responsive at trying to help. In order to finally get it properly calibrated I had a local calibrator come in and help out. We used Calman, dialed in settings on the display, created and loaded a LUT, then had to take an extra step of changing RGB, brightness, and contrast after to get it calibrated properly. This last step is not so standard but allowed us to final calibrate to Rec709 gamma 2.2. So calibration is DEFINITELY possible, just not as simple in my experience as some monitors, Would love to see Lilliput put out more literature on how to properly calibrate using ColourSpace (one of their partners) or update their DisplayCal directions to provide more details. Again, this could be user error, but the professional Calibrator said this was definitely a tough one. But we got it and likely could've dialed in more but ended up with a Delta e average of 1.4 which is more than good enough for my purposes! For the price EXTREMELY stoked on the feature set of this monitor and build quality. Well done Lilliput. 5