Designed to carry and protect, the black and chrome Odyssey Innovative Design FZ10MIXXD Flight Zone 10" DJ Mixer Case is constructed from ABS plastic laminate over 3/8" plywood with foam lining. The removable front panel provides full protection during transit and slides out for access to front mixer controls during use, while the extra deep rear cable space provides room behind the mixer for quick and easy cabling or storing compact accessories.

The stackable, detachable lid doubles as an elevated base for those lower tables or taller DJs. The case has steel hardware, butterfly latches and recessed, spring-loaded handles. It also has steel corners, aluminum edging and rubber feet. The included mixer width adjustment strips allow for a snug fit during transport.

Chrome and Black Exterior    Extra Deep Rear Cable Space    Fits 12" DJ Mixer    ABS Laminate Over 3/8" Plywood    Convenient Removable Front Panel    Removable Stackable Lid    Chrome-Plated Butterfly Latches    Recessed, Spring-Loaded Handles    Steel Corners and Aluminum Edging    Includes Mixer Width Adjustment Strips

• Chrome and black exterior design
• Foam-lined interior
• Includes mixer width adjustment strips
• Extra wide removable front access panel
• Bottom ventilation/storage pit
• Heavy-duty ball corners
• Heavy-duty recessed handle and latches
• 3/8" ply construction
• Fits DJ mixers about 8.75" to 11" wide, up to about 15.75" deep, plus 3.5" of rear space
• Case walls are about 3" high around the mixer
• Lid interior height is 3"
• Limited lifetime warranty

Related Questions and Answers

Q: 1. Will the 13u top rack fit an x32 producer?

A: Yes it will. The producer is 12RU.

Q: 2. Will this fits my audio technica at-lp120x ?

A: The dimensions of the Audio-Technica Consumer AT-LP120XUSB are 17.8 x 13.86 x 5.57", and the interior dimensions of the Odyssey Universal Turntable Flight Case are 18 x 15.25 x 3", so this combination would not be recommended.

Q: 3. Can you have access to all the jacks and ports on the back without removing the board from the bottom lid?

A: Yes you can! There is about 3 of space to access all the ports in the back. The lid comes off and we leave it in the bottom an then plug everything in and away we go!

Q: 4. does it fit a pioneer djm 600?

A: The XS-M12 from ProX will support the DJM-600 mixer.

Q: 5. Can you still plug in headphones to the side headphone jack of the x32 producer while in this case?

A: thank you for your question. This case will not work well with the X32 producer as it is not rack mountable and could be damaged in transit. You would need the B&H # BEX32PRODTP instead.

Q: 6. Curious as to the width of the console once the lid is connected as a side mount table? If the exterior dimensions are (WxHxD) 21.5" x 44.75" x 28.5", I'm guessing the total width with table mounted would be 66.25". I just want to be sure!

A: It will actually be just a little less that 66.25" because the Height dimension includes the casters, which are 2", so overall width will be closer to 64".

Q: 7. I have a pmp6000 mixer. will it fit on the slant top with no issues? the mixer dimensions are 23.5 x 19.5 x 4.8 inches

A: Thank you for your question. The PMP6000 will not fit as it is not a standard 19" rack mount unit.

Q: 8. What is the is the length of the unit when the table is set up?

A: The width of the table is approximately 38.5 corner to corner (and depth is about 22) and 21.5 on the rack itself. When the table is set up for use, the overall length across is 60 .

Q: 9. Will this fit the m32r live?

A: The Midas M32R Live is slightly too large to fit within the 13-space slanted rack on the Odyssey FZ1316WDLX Flight Zone ATA DLX Combo Rack Case.

Q: 10. How thick is the paneling used? Other cases list this (e.g. 1/4" plywood, 3/8", etc.)

A: The width of the paneling used in the Odyssey Innovative Designs Black Label Universal Case for Technics 1200 Style DJ Turntables is not specified.