Microphone Stand Height Adjustment

Matthews Hi-hi Overhead Roller Stand

Product Code: ga387
Availability: In Stock

$2,370.00 $3,436.50

Qty

17 reviews Write a review

Description
Reviews (17)

This ultra-tall stand features square foot castings to allow upright storage of the stand when collapsed.
Developed for flying Butterflys and Overheads on locations and supporting large backdrops in studios.

This stand features a "Rocky Mountain" leg, which allows independent leveling adjustment of one leg on rough or uneven terrain.

Key Specs
Stand Type	1 x Overhead Stand with Grip Head
Maximum Working Height	20.8' / 6.3 m
Minimum Working Height	7' / 2.1 m
Load Capacity	88 lb / 40 kg
Stand/Column Top Mount	1-1/8" Receiver, 4.5" Grip Head
Wheels	Built-In
Air Cushioned	No
Leveling Leg	Yes
Weight	43 lb / 20 kg
Parameters
Maximum Working Height	20.8' / 6.3 m
Minimum Working Height	7' / 2.1 m
Load Capacity	88 lb / 40 kg
Closed Length	7' / 2.1 m
Mounting
Stand/Column Top Mount	1-1/8" Receiver, 4.5" Grip Head
Features
Accepts Second Riser	No
Wheels	Built-In
Air Cushioned	No
Detachable Base	No
Leveling Leg	Yes
Reverse Legs	No
General
Number of Sections	4
Footprint Diameter	5' / 1.5 m
Leg Shape	Rectangular
Finish	Chrome
Material	Steel
Weight	43 lb / 20 kg
Packaging Info
Package Weight	49 lb
Box Dimensions (LxWxH)	85 x 12.5 x 12.5"

All-Axis locking casters.

All Overhead stands feature the new 4.5" grip head in addition to the 1-1/8 in female receptor top.

Related Questions and Answers

Q: 1. Does the Digital Baby Stand have the same size diameter legs as the Digital Combo Stand? (7/8" OD)

A: No, the width is smaller on the Matthews Digital Triple Riser Sky-Hi Baby Stand - 13.5' (4 m).

Q: 2. Is it possible to check this into an airport without it being considered oversized?

A: its a bit tricky ,its not heavy or too bulky but it is little over then 4 feet ,you could check it in it is quit durable so a light casing ,simple light stand bag should do the job

Q: 3. Has anyone used this light stand outdoors? Will it roll well on grass?

A: Yes. The unit rolls better on grass then most wheel on the market, but we highly suggest using 4x8 plywood for best movement when on grass or rail system.

Q: 4. Does this stand have any spring inside?

A: Yes, the risers on the Matthews Digital Triple Riser Sky-Hi Baby Stand - 13.5' (4 m) are spring dampened.

Q: 5. What size plug does this take?

A: Please review the following item. Matthews Stand Adapter - 1-1/8" to 5/8" BH #MALSA11858 • MFR #429029 https://bhpho.to/2N2i4aa

Q: 6. Does it come with Junior 1-1/8" to Baby 5/8" converter stud? I see it's pictured.

A: I'm sorry, no, that is an additional accessory.

Q: 7. Where are the Matthews Light Stands made?

A: BURBANK,CA

Q: 8. Hi, Does it be able work with the Sachtler FSB 8?

A: The Sachtler FSB 8 has a 75mm Ball, making it compatible with the Benro 75mm Hi-Hat.

Q: 9. Will this 1 1/8 receiver stand support and fit perfectly with an Avenger D650 junior boom?

A: This stand BH #MALSMM is compatible with boom BH #AVD650.

Q: 10. are these spring cushioned?

A: No, this Matthews Overhead Roller Stand is not spring/air-cushioned.

Angelito	08/09/2024
Probably my favorite stand for the type of work I do. It's much stronger than a C-Stand and it's more portable than a boom stand for corporate shoots. Will buy one more of this. 5

Jay	03/09/2024
I purchased one of these to add to my gear and what an amazing stand. Max height 14', min 64 and it can hold 88 lbs. The wheels are super smooth and the wheel lock works perfect. It's a triple riser and when extended it is a sight. I was looking for a stand to hold a heavy light and with will do the job and then some. 5

anna	28/08/2024
Heavy and sturdy. Exactly what I needed. I'm hanging 3, 9 ft wide paper rolls from two of these about 15 ft in the air. They aren't going anywhere. 5

Kevin	19/08/2024
This is a must have product! Tired up lifting stands and moving them 6 inches or 6 feet? This is the solution. Like all MSE products its rock solid and the wheels allow for smooth and safe moving of the stand and whatever is mounted to it. Each wheel has a lock to secure it in place. We purchased 1 to review then purchased more. 5

Angelito	16/08/2024
I use this for my aputure nova along with other lights and it handles them very well. With a couple of sandbags, I don't have to worry about this light stand. It's heavy and very sturdy. 5

Nathan	15/08/2024
This is a great stand for holding up lights. It holds a lot of weight and it rolls around. It does what the specs say it should do. I'm happy with that. 5

freddie	14/08/2024
Man this roller stand is awesome! It's heavy tho... so get out your workout gear. 5

Bryan	12/07/2024
Works like the tried and true, just lighter than most baby stands. I have been loving mine. Will last for years. 5

Richard	28/06/2024
I bought this to pair with an avenger boom arm. Even with the arm fully extended and 20lb counterweight this stand is solid. With the wide base I don't worry about it tipping. I haven't needed the full 13.5' yet but have used it to 9' with no problem. I would not hesitate to buy another one when the time comes. 5