With the outdoor UniFi AC Mesh Wide-Area Outdoor Dual-Band Access Point from Ubiquiti Networks, users benefit from a wide coverage area reaching up to 600 feet, along with enhanced data transfer rates of up to 867 Mbps on the 5 GHz frequency. These enhanced data rates and coverage capabilities are supported by a 2x2 MIMO internal antenna configuration supporting multiple data paths for a more efficient end user network connection. Installation of the UAP-AC-M access point is simple as it is 802.3af PoE compliant and includes a wall/pole/fast-mount mounting kit. Once installed, users can take advantage of 802.11ac Wi-Fi access with combined wireless data transfer rates of up to 1167 Mbps.

Open Box Products Have a Limited 1-Year Manufacturer Warranty    802.11 a/b/g/n/ac Wi-Fi Standards    Up to 1167 Mbps Wi-Fi Transfer Rates    600' Wireless Coverage    1 x 10/100/1000 Ethernet Port    UniFi Controller Software    Integrated Omni Antennas    Guest Portal/Hotspot Support    Passive Power over Ethernet    250+ Concurrent Clients    Reset Button

You can power the UniFi AC Mesh Pro AP with an 802.3af compatible switch, UniFi PoE Switch, or an optional Gigabit PoE adapter.

The enclosure of the UniFi AC Mesh AP is designed to withstand the elements, making it ideal for outdoor deployment.

Unique provisioning LED provides administrator location tracking and alerts for each device.

Built-in dual-band omni-directional antennas deliver expanded range coverage outdoors.

The UniFi AC Mesh Pro AP can be mounted on a wall or pole. (All accessories are included.)

The built-in Gigabit Ethernet port is for data and PoE.

Packed with Features
Use the UniFi Controller to provision thousands of UniFi APs, map out networks, quickly manage system traffic, and provision additional UniFi APs.

RF Map
Use the RF map to monitor and analyze radio frequencies for optimal AP placement, configuration, and troubleshooting.

Powerful RF Performance Features
Advanced RF performance and configuration features include spectral analysis, airtime fairness, and band steering.

Detailed Analytics
Use the configurable reporting and analytics to manage large user populations and expedite troubleshooting.

Wireless Uplink
Wireless Uplink functionality enables wireless connectivity between APs for extended range. One wired UniFi AP uplink supports up to four wireless downlinks on a single operating band, allowing wireless adoption of devices in their default state and real-time changes to network topology.
For devices that support Plug & Play Mesh, this functionality is extended to allow multi-hop wireless uplink - so wirelessly uplinked APs can support uplink to other wirelessly uplinked APs.

Guest Portal/Hotspot Support
Easy customization options for Guest Portals include authentication, Hotspot setup, and the ability to use your own external portal server. Use UniFi's rate limiting for your Guest Portal/Hotspot package offerings. Apply different bandwidth rates (download/upload), limit total data usage, and limit duration of use.
All UniFi APs include Hotspot functionality:
• Built-in support for billing integration using major credit cards.
• Built-in support for voucher-based authentication.
• Built-in Hotspot Manager for voucher creation, guest management, and payment refund.
• Full customization and branding of Hotspot portal pages.
Multi-Site Management
A single cloud-based UniFi Controller can manage multiple sites: multiple, distributed deployments and multi-tenancy for managed service providers. Each site is logically separated and has its own configuration, maps, statistics, guest portal, and admin read/write and read-only accounts.

WLAN Groups
Manage flexible configurations of large deployments. Create multiple WLAN groups and assign them to an AP's radio.

Related Questions and Answers

Q: 1. Does the 3 pack come with POE incectors?

A: Yes the 3 pack does.. It's the 5 packs that do not!

Q: 2. Can this Ubiquiti Networks UAP-AC-M-US UniFi AC Mesh Wide-Area Indoor/Outdoor Dual-Band Access Point be used to extend the wireless capabilities of my Xfinity modem/router to get better coverage on the same network?

A: You can have the same wifi name with the Ubiquiti Networks UAP-AC-M-US UniFi AC Mesh Wide-Area Indoor/Outdoor Dual-Band Access Point. Keep in mind that it might be necessary to adjust the settings for better performance.

Q: 3. Will these work with a UAP AC? Also do i need one UAP AC on each end one to receive the signal and one to send?

A: This would be a mesh access point. The number of units would be heavily dependent on the use case scenario.

Q: 4. I want to install a ubiquity mesh ap system that will be attached to a local IP that is radio frequency transmitted internet service. Can I use a Unifi M AP and attach via cat5 to \a switch inside a steel wall building to supply internet service to the inside of the building from the unifi mesh ap?

A: Yes but you should use a separate antenna/receiver to supply the network feed to the switch which would then be routed to feed to your mesh APs.

Q: 5. I have a Ubiquiti Networks UAP-AC-PRO UniFi Access Point. Aside from its form factor and its ability to be used outdoors, how is this different?

A: The UAP-AC-Pro has two Ethernet ports versus the one on the Mesh AP. Also: - 3 antennas vs 2 - 22 dBm vs 20 dBm transmit power - 1750 Mb/s Total (2.4 GHz: 450 Mb/s and 5 GHz: 1300 Mb/s) vs 1167 Mb/s Total (2.4 GHz: 300 Mb/s and 5 GHz: 867 Mb/s) throughput

Q: 6. will they work in a freezer -15F ?

A: Yes, the Ubiquiti Networks UAP-AC-M-US UniFi AC Mesh Wide-Area Indoor/Outdoor Dual-Band Access Point BH #UBUAPACMUS has an operating temperature rating of -22 to 158°F / -30 to 70°C/ Operating Humidity 5 to 95%.

Q: 7. can you attach a switch to the secondary port? I am interested in daisy chaining a few APs and then placing a small network switch at the end of the line for a few hard-wired devices.

A: Yes, you can attach a switch to the secondary port on the BH #UBUAPACMPRUS.

Q: 8. Does this have a dedicated mesh band?

A: No, the Ubiquiti Networks UAP-AC-M-PRO-US UniFi AC Mesh Wide-Area Outdoor Dual-Band Access Point BH #UBUAPACMPRUS does not have a dedicated mesh band.

Q: 9. I am not able to mount anything on my ceiling and would have to mount to a wall. Would this produce better coverage than a Unifi UAP-AC-Pro mounted on a wall? Thanks!

A: While it is impossible to say with 100% certainty, since that will depend in a lot of outside factors, the UAP-AC-M-US does have a higher range rating than the UAP AC PRO. Real world results will vary depending on where you install it, building materials and layout, wireless interference in the area and the rest of your network components. The only real way to know for sure is to test it out. If you have any other questions, feel free to reach pc@bhphotovideo.com.

Q: 10. I live with access to a guest wifi from business below the signal is pretty good but localized. Is this a help or something else from Ubiqiti....?

A: Yes the UAP-AC-M-US will extend a Wi-Fi area. It must be wired to the router. Preferably a Ubiquiti router or switch.