The made in the USA, Realtree Max5 Lens Cover for Nikon Teleconverter Set for 1.4x TC-14E III and 2.0x TC-20E III from LensCoat is constructed from 100% closed-cell neoprene for protection from weather, bumps, and scratches. This cover helps your extenders blend in with surroundings, making it useful for nature photographers, sports shooters, and photojournalists. The Realtree Max5 design features a wide variety of plant-like patterns, including tall grains such as wheat and oats. This makes it well-suited for hiding from birds and other types of wildlife in many different environments. Two small holes line up with the white dot indicator, allowing you to quickly line up your extender with camera mount and lens with the cover installed. It also has a hole for the extender release.

The LensCoat provides a thermal barrier, protecting your hands from cold lens surfaces and teleconverters in lower temperatures. It's easy to install and remove, leaving no residue on the teleconverter. The LensCoat is waterproof, providing protection to your lens in wet conditions, and it can help preserve the resale value of your gear.

Closed-Cell Neoprene    For 1.4x TC-14E III and 2.0x TC-20E III    Provides a Thermal Barrier    Makes Lens Less Visible to Wildlife    Protects from Bumps and Scratches    Orientation Hole for Mounting    Easy to Install and Remove    Made in the USA

Helps maintain value of the lens by protecting it from scratches

Makes using the lens easier in cold temperatures

Easy to install and remove - leaves no residue on lens

Related Questions and Answers

Q: 1. Is this size can suitable for Fuji XF 50-140 and XF 8-16 LENS?

A: It will fit the XF 50-140 the XF 8-16mm will be too big to fit

Q: 2. Size for canon 35-70?

A: Hello IraThe two Lenscoat medium Hoodies I bought were to replace the original plastic lens covers provided by Canon. It was taking too much time to remove and replace these plastic covers in the field so I now use Lenscoat hoods for all my lenses from 600mm down to 17-40mm.The medium hoods are for my 300mm f4 and 400mm f5.6 lenses that have a 77mm diameter. (They take 77mm filters) These hoods provide a loose fitting which is fine for me. You should check your lens diameter and make your choice on that. Based on my findings for a lens with 72mm or smaller diameter I use a smaller size than medium.The hoods are of high quality and provide extra benefit in that they don't get lost as easily as the plastic covers. I wholeheartedly recommend them.RegardsTerry

Q: 3. Would this fit over a 77mm ND filter mounted on a lens?

A: Yes, it will fit.

Q: 4. What size hood is needed for a Sigma 150-600 Contemporary Lens?

A: I have a canon Lens Cap E 145 for my 400 mm DO and it gives good coverage. Not sure though it would fit your 600mm.Karen

Q: 5. what size fits the canon 400mm 2.8 iii?

A: The XXXX-large is the one that will fit. You can click the link below to view; https://www.bhphotovideo.com/c/product/508943-REG/LensCoat_LCH4XLBK_XXXX_Large_Hoodie_Lens_Hood.html

Q: 6. What size i need for Nikon AF-S DX NIKKOR 18-105mm f/3.5-5.6G ED VR for a 72mm lens cover ?

A: The medium size is recommended for your lens. Please take a look at the following link: https://bhpho.to/2inKlgk

Q: 7. Will the x-large hoodie fit the Nikon 200-500 with the lens hood reversed on the end of the lens?

A: Hi, this hoodie is a little too big for the Nikon 200-500mm lens; the Large would be the right size: https://www.bhphotovideo.com/c/product/508911-REG/LensCoat_LCHLBK_Large_Hoodie_Lens_Hood.html

Q: 8. What size LensCoat Lens Hoodie would you recommend for the SAMYANG 8/3.5HD FISHEYE LENS W/HOOD? The diameter of the hood is 2.75 inches so this is right on the size boundary.

A: I have both an extra small and a small Len Coat Hoodie. I can put them both over a lens with 3 diameter lens shades however the small size is a bit easier to fit, particularly if the lens shade is deeper.Lens Coat's does not appear to indicate the hood size of their hoodie's. In my opinion it would also be better if they provided pull taps on the hoodie to help pull these hoodies over the end of the lens. I use them on lens that I like to keep the lens hood/shade attached to the lens.

Q: 9. Which size is needed for a 300mm Canon lens?

A: It will depend on the size of the lens, not the focal length - I bought this cover for a 72mm (Look up what size filters your lens uses, often Canon lenses will show the number on the inner rim at the end of the lens

Q: 10. Will this fit the sigma 150-600 sport?

A: Yes.