Safeguard your equipment with the Lens Cover for Tamron 2.0x Teleconverter from LensCoat. This water-resistant neoprene cover is custom-built to fit tightly around your teleconverter, and helps protect it against bumps and scratches that may occur while you are out shooting.

The neoprene material acts as a thermal barrier between your hands and the lens barrel, making operation more comfortable in extreme heat or cold. For simplified operation, the cover features an opening for the lens release lever. The Realtree Max5 design features a wide variety of plant-like patterns, including tall grains such as wheat and oats. This makes it well-suited for hiding from birds and other types of wildlife in many different environments. This product is made in the USA.

Water-Resistant Neoprene Material    Custom Size, Fits Tightly Around Lens    Protects from Bumps and Scratches    Shields Hands from Temperature Changes    Opening for Lens Release Lever    Realtree Max5 Color Scheme    Made in the USA

• Water-resistant neoprene cover that is custom-built to fit the Tamron 2.0x Teleconverter
• Protects equipment from bumps and scratches that can happen during use
• Makes use more comfortable for your hands during extreme heat or freezing conditions
• Access to lens release lever so you can switch lenses without taking the case off
• Realtree Max5 pattern that helps disguise gear and keep wildlife undisturbed

Related Questions and Answers

Q: 1. What size i need for a Nikon AF-S DX NIKKOR 18-105mm f/3.5-5.6G ED VR Lens with 67mm lens cover ?

A: A medium hoodie should work.

Q: 2. What size would you recommend this for the Nikkor 85mm f/1.8g?

A: I would recommend something along the lines of this: https://www.bhphotovideo.com/c/product/919752-REG/op_tech_usa_7801062_3_5_x_4_5_fold_over.html This would fit the lens with a bit of extra room to provide some extra padding.

Q: 3. I'm seeing two conflicting answers below, regarding the XL being the right size for the Nikon 200-500. Is the L or the XL the better fit for the Nikon 200-500?

A: According to Lenscoat's website, they recommend the XL hoodie.

Q: 4. What size would I need for a Sony 18-250 lens with a 62mm lens cover

A: If you are referring to the Sony 18-250mm f/3.5-6.3 DT Alpha A-Mount Wide-Telephoto Lens B&H # SO1825035, then the LensCoat Hoodie Lens Hood Cover (Small, Black), B&H # LELCHSMBK, would work for your needs.

Q: 5. Will this fit over the plastic lens hood of the Canon ef 100-400mm lens? Fit snugly and not fall off?

A: Lenscoat would suggest the LensCoat Hoodie Lens Hood Cover (Large, Black), BH # LELCHLBK. https://bhpho.to/3yDNEnM

Q: 6. What size is needed for the latest 100 - 400 Canon f/4.5 - 5.6 L IS II USM?https://a href= http://www.bhphotovideo.com/c/product/1092632-REG/canon_9524b002_ef_100_400mm_f_4_5_5_6l_is.html target= _blank www.bhphotovideo.com/c/product/1092632-REG/canon_9524b002_ef_100_400mm_f_4_5_5_6l_is.html/a

A: LensCoat Hoodie Lens Hood Cover (Large, Black)

Q: 7. Does the nikon teleconverter 2x III work with automatic focus Nikon ED AF-S nikkor 28-300 lens / Nikon D750 ?

A: Unfortunately not, the lens would need to be no wider than 50mm and have a non-variable aperture.

Q: 8. Size for canon 35-70?

A: Hello IraThe two Lenscoat medium Hoodies I bought were to replace the original plastic lens covers provided by Canon. It was taking too much time to remove and replace these plastic covers in the field so I now use Lenscoat hoods for all my lenses from 600mm down to 17-40mm.The medium hoods are for my 300mm f4 and 400mm f5.6 lenses that have a 77mm diameter. (They take 77mm filters) These hoods provide a loose fitting which is fine for me. You should check your lens diameter and make your choice on that. Based on my findings for a lens with 72mm or smaller diameter I use a smaller size than medium.The hoods are of high quality and provide extra benefit in that they don't get lost as easily as the plastic covers. I wholeheartedly recommend them.RegardsTerry

Q: 9. What size do I need for a Nikon 70-200mm f/2.8E lens hood?

A: You will need the Lenscoat Medium, click the link below to view; https://bhpho.to/38NTy8f

Q: 10. Would this hoodie fit over the Nikon 80-200MM lens hood?

A: No, you would need the LensCoat Hoodie Lens Hood Cover (Medium, Black), BH # LELCHMBK to fit the lens hood of your Nikon AF 80-200mm f/2.8D lens. https://bhpho.to/3ct3QNE