The FreeWave Fusion Basic 2.4 GHz Wireless Trigger System for Canon from Vello is a versatile, reliable remote control kit that will trigger a camera, shoe mount flash, and studio lights from up to 328' away. Sixteen discrete channels provide the ability to avoid interference from other users while maximizing your creative potential.

Use the system to expand the capabilities of a shoe mount flash or studio lights without the hassle of tangled PC cords. The FreeWave system is also great for capturing wildlife. Simply place the camera on a tripod and use the FreeWave Fusion trigger as a remote camera release from a distance. The trigger allows camera's shutter remotely to avoid unwanted camera vibration for sharper macro imaging. The 2.4GHz radio signal will pass through walls, windows, floors, and other obstructions.

The FreeWave Fusion Basic 2.4 GHz Flash Trigger Set is compatible with most major manufacturers' shoe-mount flashes with manual power control. Pentax, and Sony Minolta-type shoes are not compatible. Each unit runs off two AAA batteries (not included).

Frequency: 2.4 GHz    Wireless Range: 328'    Channels: 16    Flash Sync Speed up to 1/250 sec    Dual-Function Shutter Release    Five-Second Delay Mode on Transmitter    Two Receivers & One Transmitter    Shutter Release & Flash Trigger Cables

The FreeWave Fusion Basic can wirelessly trigger hot shoe flashes, studio lights, or a camera from up to 328' away. It can also be used as a wireless "cable release" for wildlife or on a tripod for macro work.

This low frequency signal can pass through and around obstructions offering greater flexibility in placement of flash units and cameras.

Take advantage of sync speeds that match the synch speed rating of a camera up to 1/250 sec.

The wireless system's 16 channels allow transmitter/receiver settings to be changed to avoid interference from other wireless devices.

Multiple receivers to trigger many flashes may be used with a single transmitter. Multiple cameras may also be triggered with additional receivers and shutter release cables.

Confirm communication of trigger system with pre-focus, shutter release, and flash trigger in wireless mode.

Use the FreeWave Fusion Basic on a tripod with a camera's Bulb setting to make exposures as long as the camera will support without touching the camera.

Press halfway to focus, press fully to trigger the shutter.

Release the shutter from a safe distance for photos of hard to approach wildlife.

Use the transmitter as a wireless "cable release" to avoid accidental movement when shooting close-up.

Allows the cameras motor drive to be used for rapid sequences.

Most hot shoe flashes, studio strobes, and cameras are compatible with the FreeWave Fusion Basic 2.4 GHz.

Canon EOS 3-Pin: 1DX Mark III, 1DX Mark II, 1D X, 1D C, 1Ds Mark III, 1Ds Mark II, 1Ds, 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II, 1D, 5DS R, 5DS, 5D Mark IV, 5D Mark III, 5D Mark II, 5D, 6D Mark II, 6D, 50D, 40D, 30D, 20D, 10D 7D Mark II, 7D, R5

Canon EOS 2.5 mm: R6 II, R6, R, RP, R8, R10, R100, M6 II, M6, M5, 90D, 80D, 70D, 60D, 77D (9000D), T7i (800D),T8i (850D), T7 (2000D), T6s (760D), T6i (750D), T6 (1300D), T5i (700D), T5 (1200D), T4i (650D), T3i (600D), T3 (1100D), T2i (550D), T1i (500D), XSi (450D), XTi (400D), XT (350D), XS (1000D), Digital Rebel (300D), SL3 (250D), SL2 (200D), SL1 (100D), and Elan series

Canon PowerShot: G1 X Mark III, G1 X Mark II, G1 X, G5 X, G3 X, G16, G15, G12, G11, G10, SX70 HS, SX60 HS, and SX50HS

Contax: N and 645

FUJIFILM: GFX 100S, GFX-100, X-PRO3, X-H2, X-H2S, X-T5, X-T4, X-T3, X-T1, X-T30 II, X-T30, X-E4, X-E2, X-E1, X100V, X100T, X30, and X-S10

Hasselblad: H series

Olympus: OM-D E-M1X, OM-1, OM-D E-M1 Mark II, E-M5 III, and E-M5 II

OM System: OM-1, OM-5
Pentax: K10D, K20D, K100D, K110D, K200D, K-3, K-5, K-5 II, K-7, K30, K-50, K-500, *istDS, DS2, DS, DL2, DL, and D

Samsung: NX10 & NX100; GX-1S, GX-1L, GX-10, and GX-20

Sigma: SD1, SD9, SD10, SD14, and SD15

Related Questions and Answers

Q: 1. this says it works with t6i and t6s but what about the base t6?

A: This will work with a Canon T6.

Q: 2. Is this compatible with both Mamiya RZ67 and Fujifilm GFX please?

A: Being that this version of the FreeWave Fusion Basic Wireless Trigger System is for Nikon cameras and flashes, it cannot be used with the Mamiya RZ67 nor the Fujifilm GFX series cameras.

Q: 3. Is it compatible with the Canon 77D?

A: Yes, this remote is compatible with Canon DSLRs such as the EOS 77D.

Q: 4. Will this work with the multi interface shoe on the Sony A7RV?

A: This is basic trigger it will fire the strobe NO TTL NO HSS, yes it will fit on your Sony camera.

Q: 5. Would the Nikon version of this product work with an old Nikon F4 film camera and a SB-24 flash?

A: Yes. 100% the following system will offer no TTL but will work in all manual mode.

Q: 6. I use an older Speedotron with household style plug/socket type sync cords. Is there an adapter to use Vello on this flash?

A: Unfortunately, the Vello Freewace Fusion Basic Trigger would not be able to handle the sync voltage of an older Speedotron power pack. A more suitable option would be the PocketWizard PlusX 2 Pack, BH # POPWPX2P along with the PocketWizard MH1 Miniphone to Household Cable - Straight - 16" (40.6 cm), BH# POCHHM16. https://bhpho.to/2Z0jbfO https://bhpho.to/3Db3vxE

Q: 7. Will this workd with Nikon z6?

A: Yes, this device is compatible with the Nikon Z6.

Q: 8. How many receivers can you use? Or, what is the maximum number of receivers you can use?

A: With this manual transmitter you can use as many receivers as you like, they will all be in manual.

Q: 9. Will this work with a Canon 80D?

A: Yes, this can work with the Canon EOS 80D.

Q: 10. Will this work with a Nikon Z9 and SB-700 speed light?

A: Yes this should work on the z9. It does work with the sb700.