Line Out Converter Pro Audio

Clearone Converge Pro 2 128srd Professional Audio Dsp Platform

Product Code: ga39709
Availability: In Stock

$7,796.85 $10,291.84

Qty

0 reviews Write a review

Description
Reviews (0)

The CONVERGE Pro 2 128SRD Professional Audio DSP Platform from Clear One is a professional audio product that delivers rich audio performance, enhanced management, and simplified configuration in sound reinforcement for boardrooms, conference rooms, lecture halls, courtrooms, and houses of worship.

It features twelve mic/line inputs with eight mic/line outputs, a USB audio interface, noise cancellation, Dante, and DARE feedback elimination. CONVERGE Pro 2 128SRD brings simple, single-cable connectivity to peripherals, the ability to stack devices, intuitive software, and choices for digital-audio networking.

Furthermore, smaller conference rooms can be served using a single CONVERGE Pro 2 128SRD processor. It uses a single P-Link peripheral connection up to 200' apart.

For Sound Reinforcement 12 x Mic/Line Inputs 8 x Mic/Line Outputs USB Audio Interface Dante Noise Cancellation DARE Feedback Elimination

Mic/Line Inputs and Outputs
Inputs	Balanced Audio Inputs: 0.15" / 3.81 mm orange color Phoenix/Euroblock male header, push-on mini-terminal block
Outputs	Balanced Audio Outputs: 0.15" / 3.81 mm black color Phoenix/Euroblock male header, push-on mini-terminal block
Frequency Response	20 Hz to 22 kHz @ +4 dBu, ±0.5 dBu
Equivalent Input Noise	20 kHz BW, max gain, Rs = 150 Ohms, -126 dBu
Total Harmonic Distortion (THD) + N	20 Hz - 22 kHz @ +4 dBu, line level, 0.006% 20 Hz - 22 kHz @ -56 dBu, mic level, < 0.04%
Dynamic Range	20 Hz - 20 kHz @ 0 dB, > 105 dB
Crosstalk	Mic/Line: Channel to channel, stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, < -98 dB
Input Impedance	Balanced (line to ground), 2.2 kOhms, 1%
Nominal Input Level	Adjustable -56 dB to 0 dB, 7 dB step coarse gain
Maximum Input Level	-65 dBu to 20 dBu
Phantom Power	48 V, impedance 6.81 kOhms
Output Impedance	Balanced (line to ground), 95 Ohms, 1%
Output Level	Nominal: 0 dBu Maximum: 20 dBu Selectable: -40 dBu
USB Audio
Port Type	USB-B connector
Audio	Digital audio, 2 x 2 bidirectional channels
Sample Rate	48 kHz
Bit Depth	Sample: 24-bit
Compatible	USB 2.0 USB 3.0
Ethernet
Port Type	RJ45, 10/100 Mb/s Ethernet network, auto negotiation
IP Address Assignment	IPv4 (IPv6 upgradeable through future s/w, f/w upgrade)
Dante Network
Port Type	RJ45 Gigabit Ethernet connectors for primary and secondary ports
Audio	Digital audio, 16 x 16 bidirectional channels Sample Rate: 48 kHz, 96 kHz Sample Bit Depth: 24-Bit
C-Link Expansion Bus
Port Types	RJ45 (Cat 5e or 6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory terminated Cat 5e or -6 cable Distance: Up to 150' / 45 m
P-Link Peripheral Bus
Port Types	RJ45 (Cat 5e or 6)
P-Link Connector	In and Out: Proprietary peripheral bus
PoE	In: P-Link in port PoE 802.3 af mode B, midspan Power on "spare pairs" 4, 5, 7, and 8 Input Voltage Range: 48 V to 56 V
Audio	Up to 3 Beamforming microphone array 2 units + Up to 3 DIALOG 20 wireless receiver units + Up to 3 USB expander units + Up to 3 GPIO expander units
Cable	Solid core, factory terminated Cat-5e or -6 cable Distance: Up to 200' / 60 m
Distance	Up to 150' / 200 m
Long Distance P-Link	Increases P-Link distance from 200 x 650' / 61.0 x 198.1 m 650' / 200 m maximum cable distance between any two units Cat 6, 550 MHz, 23 AWG, solid conductor cable Do not use copper clad aluminum (CCA) cable Available only for BFM2 peripheral units 48 V PoE midspan mode B power injector for 1 BFM2 unit 56 V PoE midspan mode B power injector for 3 BFM2 units
RS232 Parameters
Port Type	DB9 female
Settings	9600/19200/38400/57600/115200 Baud; Serial Echo; Flow Control
Support	Serial commands
GPIO
Port Type	0.2" / 0.5 cm green color Phoenix/Euroblock type male header
Support	Control, status, variable voltage control
Power Pin Assignment	5 VDC @ 350 mA power source
Pin Assignments	Pin 1 to 4: Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC max Ground Pin: GND
USB Control
Port Type	USB-B connector
Compatible	USB 2.0, USB 3.0
Power
Port Type	AC inlet
Mains Voltage	100 to 240 VAC, 50/60 Hz
Power Consumption	50 W typical
Thermal	170 BTU/hr typical
Operating Temperature	14 to 104°F / -10 to 40°C
Dimensions and Weight
Rack Units	1 RU
Dimensions	17.0 x 10.7 x 1.7" / 43.2 x 27.3 x 4.4 cm without rack-ears 19.0 x 10.7 x 1.7" / 48.3 x 27.3 x 4.4 cm with rack-ears
Weight	9.3 lb / 4.2 kg

12 Mic/Line inputs
Built-in Dante for networked audio
Reduced footprint and power consumption

Standalone and daisy-chained system
Stack units for up to 144 Mic/Line inputs
Expansion bus “C-Link” with 64-channels
“P-Link” bus to connect peripheral devices

Distributed Echo Cancellation on every mic input
Noise Cancellation with Adaptive-Ambience
Acoustic Intelligence with faster convergence
DARE feedback elimination
Microphone gating

Sound Reinforcement applications
Dante for audio networking

Updated console software
Auto-discovery of devices
MatrixView for entire system
FlowView for visualized audio signal paths
System monitoring and troubleshooting

Related Questions and Answers

Q: 1. Will this Interface work with Akai Force firmware 3.1 as USB audio interface? How many channels?

A: If this Motu interface is compatible with your computer and your Akai Force is compatible with your computer then they will both work together without any issues. USB 2.0 (44.1 to 48 kHz): 64 in/out USB 2.0 (88.2 to 96 kHz): 32 in/out USB 2.0 (176.4 to 192 kHz): 24 in/out

Q: 2. Can you hear the fans?

A: Hi, yes but the fans are designed to be very quiet on the QSC GXD 8. Thank you for shopping at B&H!

Q: 3. How can I connect 6 speakers to a 2 channel amp?

A: Depending on the specifications of your speakers it may not be possible to connect 6 speakers to a 2 channel amplifier. This particular amp is not designed to accept less than a 4 ohm load per channel. For information or suggestions on connecting speakers to this amplifier, please contact a Pro Audio Representative here by phone at 800-606-6969 or email audio@a href= http://bandh.com target= _blank bandh.com/a

Q: 4. does this work with the clearone chat 170s?

A: This can also be used for the Chat 170 units.

Q: 5. Can this fit in the bag that comes with the Seaport i-Visor On-Set?

A: Hi, for some reason i didn't get any bag with it, so i don't know

Q: 6. does the TBS-BB44 support AEC?

A: AEC is not a feature on this device. The software that controls it does, however, feature a graphic anti feedback EQ and a compressor and a limiter- According to this data page for it. https://www.atlasied.com/f/3219/ATS004436B%20TSD-BB%20Data%20Sheet.pdf

Q: 7. Can it work properly with Tely Labs telyHD Pro?

A: The Chat 150 architecture is quite open. Basically if these systems have a USB connection and can recognize a 3rd party peripheral (within the GUI) in order to by-pass their audio and direct it to the Chat..then yes.

Q: 8. Which are the 25 stellar UAD plug-ins you get when you buy the universal Apollo twin x quad Heritage

A: https://www.bhphotovideo.com/c/product/1608865-REG/universal_audio_apltwxq_he_apollo_twin_x_quad.html/overview B&H Part # : UNAPLTWXQHE 25 Powered Plug-Ins Includes Realtime Analog Classics plug-in bundle plus 11 additional plug-ins to complete the compressor, EQ, and preamp collections and provide another reverb (plug-ins support VST, RTAS, Audio Units, and AAX 64-bit for compatibility with all major DAWs): UA 610-A Tube Preamp and EQ (Vintage) UA 610-B Tube Preamp and EQ (Modern) Marshall Plexi Classic Guitar Amp Ampeg SVT-VR Classic Bass Amp UA 1176LN Limiting Amplifier (Legacy) UA 1176SE Limiting Amplifier (Legacy) UA 1176 Classic Limiter Collection (1176LN Rev E, 1176 Rev A, and 1176AE 40th Anniversary Edition) Pultec EQP-1A EQ (Legacy) Pultec MEQ-5 EQ (Legacy) Pultec Passive EQ Collection (EQP-1A, MEQ-5, and HLF-3C) Teletronix LA-2A Leveling Amplifier (Legacy) Teletronix LA-2A Classic Leveler Collection (LA-2A Silver, LA-2A Gray, and LA-2) Raw Distortion Precision Channel Strip (Precision Mix Rack Collection) Precision Reflection Engine (Precision Mix Rack Collection) Precision Delay Mod (Precision Mix Rack Collection) Precision Delay Mod L (Precision Mix Rack Collection) Pure Plate Reverb RealVerb Pro Custom Room Modeler

Q: 9. Hi, will this work on an AMD Ryzen system?

A: It would depend on the computer's operating system. It may be best to contact Universal Audio with the details about the system you have to check on compatibility. You can reach their customer support agents by phone at 877-698-2834 or 831-440-2436 from 9 AM to 1 PM Pacific Time on Mondays, Tuesdays, Thursdays, and Fridays (phone support is not available on Wednesdays). As another option, you can submit your request to Universal Audio by email using this link: http://help.uaudio.com/hc/en-us/requests/new

Q: 10. Which cable is suitable to connect the device to my computer (Windows)?

A: The Universal Audio Apollo Twin X DUO Heritage Edition Desktop 10x6 Thunderbolt 3 Audio Interface can be connected to a Windows computer equipped with Thunderbolt 3 by using a Thunderbolt 3 cable like the Xcellon Thunderbolt 3 Cable - 1.6', 40 Gb/s (B&H # XCTB354005) or the Belkin Thunderbolt 3 USB Type-C Male Cable - 3' (B&H # BEUSBCC3BLK).

There are no reviews for this product.