With the INS-3AF-I-G Instant 802.3af Indoor Gigabit PoE Converter from Ubiquiti Networks, it is easy to convert a standard PoE-compatible device to accept devices using the 802.3af PoE network standard. In addition to 802.3af PoE support, this converter also supports Gigabit data transfer rates, features enhanced surge protection capabilities, and supports longer cable runs to both airMAX and UniFi devices.

802.3af PoE Support    2 x RJ45 Gigabit Ethernet Ports    48V / 802.3af Power Input    24V / 0.5A Max Power Output    24V Passive PoE Power Method    ± 15kV Surge Protection    Ubiquiti Compatibility    Longer Cable Runs

The Instant 802.3af Gigabit PoE Converter works with 10/100/1000 Mbps ports to deliver high throughput speeds over its wired connection.

The Instant 802.3af Gigabit PoE Converter integrates seamlessly with a variety of auto-sensing 802.3af PoE switches for remote power control applications. As you manage and monitor your network, you can conveniently power or power cycle your remote devices using your 802.3af switch.

For ease of power management, you can centralize the 802.3af switch and power source, and you can include a UPS (Uninterruptible Power Supply) as a backup. This way your network continues to run even during a temporary power outage.

The Instant 802.3af Gigabit PoE Converter is compatible with most Ubiquiti PoE devices using 100 Mbps or Gigabit Ethernet ports. Compatible products include airMAX and UniFi devices.

High voltage carries power more efficiently (using less current) than low voltage. The Instant 802.3af Gigabit PoE Converter enables longer cable runs due to a more efficient power delivery–so your products can get the power they require even when they are located far from the 802.3af switch.

The Instant 802.3af Gigabit PoE Converter provides an additional ±15kV of Ethernet isolation for built-in protection that lessens the risk of ESD or surge damage to your devices.

Related Questions and Answers

Q: 1. Will this work with Speco O2VLB8 IP camera?

A: No, this Ubiquiti POE injector will not work with the Speco camera.

Q: 2. Are all 8 ports POE. Is it active or passive POE.

A: This Ubiquiti Networks UISP-R 8-Port Gigabit PoE Compliant Router has 8 passive PoE ports.

Q: 3. what's the difference between standard and the one with Gigabit LAN port. I don't see any extra ports in the picture for the latter?

A: The standard is up to 10/100 Mbps and this one is up to 1Gbps.

Q: 4. can this power the Unifi AC-IW? https://www.bhphotovideo.com/c/product/1296864-REG/ubiquiti_networks_uap_ac_iw_us_uap_ac_iw_unifi_access_point.html

A: Yes. The Ubiquiti Networks 48V PoE Adapter B&H # UBPOE4824W will power the Ubiquiti Networks UAP-AC-IW-US UniFi Access Point Enterprise Wi-Fi System BH #UBUAPACIWUS.

Q: 5. Can the 50V 60W Gigabit Adapter be used with Ubiquiti Networks U6-LR UniFi 6 AX3000?

A: Yes it will work with the Ubiquiti Networks U6-LR UniFi 6 AX3000 Long-Range Access Point BH #UBU6LRUSe

Q: 6. Will this work with Avaya IP desk phones?

A: That would depend on the model of the Avaya Phone.

Q: 7. I have the ubiquity edge router er-x that takes 24v passive input ( I guess that is something non standard). If I buy a ubiquity 8 port switch that has active PoE (802.3af) can I use this adapter to then power the router through PoE using the switch as the ‘power source’?

A: Yes this would work.

Q: 8. Is this POE injector 802.3at compliant?

A: Yes, this will be 802.3at compliant.

Q: 9. Could this be used to power a Panasonic AW-HE40SW camera?

A: This PoE adapter would not be compatible for powering the Panasonic AW-HE40SW camera.

Q: 10. I have a small Ubiquiti network managed under a CloudKey. Is this router compatible and can it be configured by the cloudkey?

A: The Ubiquiti Networks UISP-R 8-Port Gigabit PoE Compliant Router is not compatible with Cloud Key.