Embrace full control over the Nissin Air System with this Air10s Wireless TTL Commander . Able to work with Micro Four Thirds cameras with TTL support, this 2.4 GHz radio commander unit provides full wireless control and TTL communications with NAS-compatible flashes and receiver. It can also operate at distances of up to 328' over one of eight channels and with control over up to eight groups. A unique capability of this model is crossover TTL support, allowing users of Micro Four Thirds cameras to work wirelessly, including TTL, with Nissin Air System flashes originally designed for other brands.

An advantage of this Commander is remote control over your flashes settings, including manual power output from 1/1 to 1/256, manual zoom from 24-200mm, and TTL exposure compensation. All of these settings can be seen and set via a color LCD panel. An AF assist beam is available for compatible cameras to help shooters work in low-light conditions. Also, it features a variety of sync settings, including slow, high-speed, 1st, and 2nd curtain sync as well as red-eye reduction on Olympus cameras. And, a microSD card slot can be used for firmware updates.

Nissin Air 2.4 GHz Radio TTL System    Compatible with Micro Four Thirds TTL    Wireless TTL with NAS Flashes & Receiver    328' Range; 8 Channels & 8 Groups    Crossover TTL Control of NAS Flashes    Manual Power and Zoom Control    TTL Exposure Compensation    Color LCD Panel; AF Assist Beam    Slow, High-Speed, 1st/2nd Curtain Sync    microSD Card Slot for Firmware Updates

Nissin Air System uses a 2.4 GHz radio to transmit data up to 328' to compatible NAS flashes and receivers.

Manual controls for adjusting power from 1/1 to 1/256 and zoom from 24-200mm.

TTL flash exposure compensation can be set from ±2 EV in 1/3 EV steps.

TTL Memory Function memories exposure from TTL mode and retains this data when switched to manual mode.

Open Mode allows multiple Air10s Commanders to pair with the same group of strobes.

Crossover support allows for wireless TTL communication between a commander and strobes even if the flashes are designed for different camera systems.

Continuous shooting speed of up to 10 fps.

Control over flash's modeling light function.

Remote shutter release socket.

microSD card slot for future firmware updates.

Related Questions and Answers

Q: 1. will it be absolutely compatible with nissin i40, TTL HSS?

A: Unfortunately, Nissin does not produce an Air R Receiver for the i40 with the Micro 4/3 interface at this time. That being said, this transmitter cannot trigger the flash wirelessly in TTL or HSS.

Q: 2. Will the Air 10s work with Godox flashes?All flash are compatible with the same system, Fuji

A: No, the Nissin Air10s Wireless TTL Commander for Fujifilm Cameras is not compatible with Godox.

Q: 3. Does anyone know if the Nissin Air10 for Fujifilm will support High Speed Sync?

A: Yes the Nissin Air10 does High speed sync with compatible flashes and Fujifilm Cameras that also have HSS ability.

Q: 4. Will this be compatible with both Nissin Di700A and i60A for MFT?

A: Yes it will once released. There are some advanced features on the new Air 10s that are designed for future flashes so some of the features will not work, but you will be able to get some additional features by using the Air 10s.

Q: 5. high speed sync?

A: Yes, the Nissin Di700A Flash Kit with Air 1 Commander for Sony Cameras with Multi Interface Shoe has High Speed Sync capabilities.

Q: 6. can it work with Sony A7 riii camera ?

A: Yes, the Nissin Air10s Wireless TTL Commander for Sony Cameras is compatible on the Sony A7r III.

Q: 7. Does it work with HVL-F45RM flash?

A: Unfortunately, the Air10S Commander cannot work with the HVL-F45RM. A more suitable commander is the Sony FA-WRC1M Wireless Radio Commander B&H # SOFAWRC1M.

Q: 8. How do I know if the Air10 is communicating with my SONY A9? the test pilot will trigger i60a flash but won't fire when shutter release...

A: The Flash Mode in the Camera Settings 1 would need to be set for Wireless (WL) in order to use the Air 10 Transmitter properly on the Sony A9.

Q: 9. Nissin Air 10s wireless TTL Commander will be available in versions for different camera bodies: I own Nikon (D810) & Fuji (X-H1, X-Pro2) cameras will I need 2 camera-specific Nissin Air 10s Controllers?

A: In order to have the proper TTL communication between the flash and the camera, you would need the Air 10S Commander specific to the camera you are using.

Q: 10. Does Nissin Air10 will work with Metz flash (64 Af1 and Metz 76Mz5?

A: The Nissin Air R Receiver for Nikon Flashes B&H # NINDARNIK is needed to fire the Metz 64AF1 attached to its shoe and the Metz 76MZ5 attached with a sync cable.