The black Bose Professional ControlCenter CC-3 Zone Controller is a remote, end-user interface for use with Bose FreeSpace amplifiers, PowerShare amplifiers, and ControlSpace processors. This passive controller features a linear potentiometer with a large knob for volume control, plus a four-position switch for A/B/C/D source selection. Channel selection is achieved via the 8 x DIP switch bank.

The unit fits 1-gang electrical boxes and supports Decora-style wall plate covers (available separately). The CC-3 uses Cat 5 wiring and can be daisy-chained via the two RJ-45 connectors for simplified wiring. Included is a sheet of color-matched, pre-printed labels, with two blanks for custom labeling.

For FreeSpace, PowerShare, ControlSpace    Volume Control, A/B Source Selection    Fits 1-Gang Electrical Box    Large Volume Knob    A/B/C/D Source-Selection Switch    Supports Decora-Style Wall Plates    Channel Selection via 8 x DIP Switches    2 x RJ-45 Connectors for Day-Chaining    Includes Custom Labels

• Retail stores, restaurants and bars, auxiliary zones
• Hospitality venues, religious and worship facilities

Related Questions and Answers

Q: 1. How to u connect the 2 series to the sub and ur stereo? I don't see a connection or power to the sub.

A: The Bose Professional FreeSpace 3 Series I Acoustimass Bass Module has terminal screw strips for use to connect it to an amplifier or stereo receiver and for connecting additional speakers.

Q: 2. How much ich do these run? I have 2 panaray 12's. Can these be plugged into any power amp? I am currently using a mackie 808s FR series. 600 watt. Would they work? Smokehousegamblers @ gmail . Com smokehouse on Jun 20, 2021 BEST ANSWER: They ill connect to a power amp via their: Connectors 2 x NL4 Neutrik speakON (parallel-wired), input 1 x 2-pin barrier strip, input NOTE: Nominal Impedance 8 Ohms Power Handling 300 W (1200 W peak) (less)

A: Bose Professional MA12 Power Handling: 300 W (1200 W peak) @ 8 ohms. For more details please contact BOSE Professional directly: Pro Installed Technical Support Monday - Friday, 9am-7pm, EST 800-994-BOSE Portable PA Technical Support Monday - Friday, 9am-9pm, EST 877-335-2673 NOTE: The Mackie 808S 8-Channel Stereo Powered Mixer: 1000W @ 4 ohms and @ 2 ohms.

Q: 3. I am just using a bookshelf Samsung Stereo that came with 4 ohm speakers/ 80W per channel. Is there a way to wire these that bypasses the internal transformer, basically making them work the Freespace 51's (which I can't find)?

A: Yes, The Bose Freespace 360P Series II Environmental Loudspeaker can operate at 4 ohms and can handle 80W of power. If you use the black common wire as negative and the orange 80W wire as positive, you will be using the speaker at full power and bypassing its internal transformer. The Freespace 360Ps and Freespace 51s cannot be daisy chained together but they can be wired directly to your stereo receiver or power amplifier.

Q: 4. I bought two of these speakers to be used with a Sonos Amp (125W channels). Can/should I bypass the internal transformer?

A: For connection to a Sonos amp, the Bose Freespace 360P Series II Environmental Loudspeaker (Green) should be in a 4-ohm setting. The transformer wattage tap is for the purpose of connecting to a 70V/100V amplifier so that you can keep the speaker limited to a certain wattage, reserving the leftover wattage for connecting other speakers to that same 70V/100V amplifier, which is typically used in commercial retail, grocery stores, and warehouses.

Q: 5. For which brand mixer or ampllifer this controller suits? Hope its not an universal controller. So please send me the Amplifier

A: The AtlasIED Atmosphere C-ZSV Zone, Source, and Volume Wall Controller (Black), BH # ATCZSVUSB, is designed to work with AtlasIED components. See examples below: AtlasIED Atmosphere 4-Zone Audio Processor (B&H # ATAZM4) AtlasIED Atmosphere AZM8 8-Zone Audio Processor (B&H # ATAZM8) AtlasIED Atmosphere 400W Networkable 4-Channel Power Amplifier (B&H # ATAZA404) AtlasIED Atmosphere 800W Networkable 4-Channel Power Amplifier (B&H # ATAZA804)

Q: 6. I have 2 panaray 12's. Can these be plugged into any power amp? I am currently using a mackie 808s FR series. 600 watt. Would they work? Smokehousegamblers @ gmail . Com

A: They ill connect to a power amp via their: Connectors 2 x NL4 Neutrik speakON (parallel-wired), input 1 x 2-pin barrier strip, input NOTE: Nominal Impedance 8 Ohms Power Handling 300 W (1200 W peak)

Q: 7. does the sx2 fit?

A: Yes it does, it fits perfectly

Q: 8. Which size speakers in side

A: The Bose Professional FreeSpace 3 Surface-Mount Satellite Loudspeaker features a 2.5" full-range driver within.

Q: 9. Is there a diagram or picture of the included wall mounting brackets and instructions for the wall mounting that are available for review?

A: You can see a diagram of the included wall-mount brackets for the Bose Professional FreeSpace 3 Surface-Mount Satellite Loudspeakers and the instructions for installation on pages 3 and 10 of the user manual. https://www.bhphotovideo.com/lit_files/703689.pdf

Q: 10. Do I have to by this unit if I am buying the bose panaray ma12EX speakers?

A: No. The CVT-MA12EX is an optional transformer which is only required if you want to use the MA12EX in a 70V or 100V constant voltage system.