The R10 Ten Space 500 Series Rack from Rupert Neve Designs is comprised of a solid steel chassis with sliding nuts to accommodate various manufacturers 500-series modules. It features LED current metering and more than 150% the required current for a 10-space chassis, which can prevent failings under a higher-than-expected load in recording and mixing applications.

Equipped with LED current metering to show how much power is being used, the internal power supply is double-shielded to avoid significant magnetic induction in any of the channel positions. Built with XLR and 1/4" inputs and outputs on the back panel, the R10 helps your modules realize their fullest potential.

The R10 is built to 500 series specifications and will work with any properly-designed 500-series modules you wish to include in it. It can accommodate modules that are slightly out of spec with its built-in, variable-position screw holes, and makes the installation process as smooth as possible. Additionally, the buss-link function can be enabled in pairs using link jumpers.

Finally, if you want to get the very best performance from your 500 series modules, the R10 is a rack for the serious sound you want, and it will get the job done.

For 500 Series Rack Modules    LED Current Metering    150% More Power for 10-Space Chassis    Solid Steel Construction    Accommodates Various Manufacturer Units    VCA Buss-Link Function Enabled in Pairs

Related Questions and Answers

Q: 1. Will the Lee filter holder fit inside this pouch?

A: The filters themselves fit very well and seem very protected. The filter holder that comes with the individual filters will not fit in the pouch. I do really like the pouch and its versatility. I would highly recommend it.

Q: 2. Would this pouch also work for the LEE Big Stopper which is 100 mm x 100 mm? How about non-LEE round screw-on filters such as polarizing filters? Not sure if the sleeves are too deep for filters other than the LEE 100 mm x 150 mm filters.

A: Yes, you could use the LEE Field Pouch for 100x100mm or the 105mm circular polarizing filter as well as the 100x150mm filters.

Q: 3. Will this fit under the dash of my '67 Mustang: I can power it with an inverter! How many amps will it draw? Thanks

A: We are not in the mobile car audio business so we donot have specifications for your car. Please verify this device's dimensions for a compatible fit prior to purchasing.Approximate dimensions: (W x D x H) 1.50 x 6.89 x 5.32 (3.81 x 17.5 x 13.5 cm)

Q: 4. does it come with a grid?

A: The Dracast softbox for X series 500 does NOT come with A grid.

Q: 5. How many stops of light do you lose using this soft box?

A: The Dracast softbox for X-Series 500 provides a 1 1/2 stop of light light loss.

Q: 6. Will this work with the SmallHD Focus?

A: Yes, it works very well. I like it!

Q: 7. What is the distance between the front and back feet on the bottom of the case?

A: The distance between the feet on the bottom of the ProX 13 RU Top DJ Mixer Flight Case with 6 RU Rack Space and Laptop Shelf measures 21" from the feet near the front of the case to the feet near the back of the case, and the distance between the two feet in the front or back of the case, measuring from the left side to the right side, is 17".

Q: 8. Is this available with xlr connectors?

A: It is not, you would need a 500 series rack for it. There is a rack-mount unit with 1/4 inch outs: a href= http://dbxpro.com/en-US/products/120a target= _blank http://dbxpro.com/en-US/products/120a/a

Q: 9. Does it fit the 500D?

A: The Dracast Softbox for X-Series 500 fits on DRX500 Bi-Color and DRX500.

Q: 10. I've seen reviews say that this doesn't come with a power supply. Is that true?

A: This interface comes with a power supply.