The pack of eight 9 dBi 3-Level Extended Antennas from Cinegears work with all Ghost Eye wireless video transmission systems. They can also be used with other systems using RP-SMA connections. Each antenna's 9 dBi gain-boosting ability provides maximized coverage for your system.

Ghost Eye wireless video transmission systems

Works with all RP-SMA connectors

Omnidirectional for improved coverage

Offers 360° rotation and 90° tilt

Related Questions and Answers

Q: 1. How far it will transmit when its not a line of sight.?

A: The answer honestly is, it depends. Is the obstruction thin like cloth, or is it sheet rock or is it concrete? The thicker the obstruction, the lower the distance. If you are in a solid, thick concrete box, probably no transmission. If you are in an average wood and sheet rock home, you should be OK.

Q: 2. What cables are included?

A: There are 2x Two-Pin Lemo Power Cables. These we believe are Lemo to D-Tap. You will have to supply the appropriate video cables.

Q: 3. latency?

A: The Ghost-Eye 150M V2 is under 1 ms of Latency.

Q: 4. How long does it take to connect the transmitter to the receiver? Thanks!

A: Once the transmitter and receiver are set up and powered, pairing the two is supposed to be instantaneous.

Q: 5. How many feet?

A: The Ghost-Eye is designed to allow transmission of uncompressed, wireless HD video signals up to a distance of 492 ft. The caveat with this and any other wireless system is that this distance is a clear, unobstructed line-of-sight without strong radio interference. The distance comes way down if you are inside, have walls made of wood or concrete and have strong radio transmissions present.however, it is our opinion that most likely you can use this on your set even if the signal must go around concrete walls. If the distance is less than 50-80', you should be fine.

Q: 6. How does the transmitter mount to a camera? We own the Ghost-Eye 600M and it has a 1/4"/20 screw terminals, this has none shown.

A: The most common way the CINEGEARS Ghost-Eye Wireless HDMI & SDI Video Transmitter 1000 and other wireless TX is mounted to a camera is on a cage for the camera and with an articulating arm.

Q: 7. Is the power/strength level of the transmitter customizable, or is it always going to consume maximum power from batteries?

A: It does not have power/strength settings.

Q: 8. Does this support PAL videos?

A: Yes it does. This system supports both PAL and NTSC signals.

Q: 9. What about power consumption?

A: You can power these by small battery, big battery or AC power. V mount or gold mount should last the shoot day. Smaller batteries should last about 3-4 hours depending on how you use them.

Q: 10. Does this unit have audio included in the signal? We use another system right now and its video only we need something that can transmit the video and audio.

A: Audio is sent via the SDI connection. SDI-embedded 2-channel, 24-bit/48 kHz.