The BlueFox3 USB3 Vision Camera from MATRIX VISION is an area scan machine vision camera for inspecting products on assembly lines, gauging and measuring quality, inspecting defects, label inspection on bottles, and more. It allows you to get a physical image of a product onto the computer in two-dimensional space and measure accuracy/inaccuracy by counting the number of pixels. Featuring a C-mount lens mount, the BlueFox3 supports any C-mount lens, including a wide range of MATRIX VISION telecentric lenses. MATRIX VISION is part of the AIA Machine Vision Trade Association.

This version of the camera features a 12.4MP, 1.1" sensor, 30 Hz frame rate, on-board color processing, and a 12-pin I/O connector on the back for power input, trigger input, and trigger output. (An optional Hirose cable, such as model # RTKS-BCX-HR12-05.0, is required for the I/O connection). The camera captures images at a resolution of 4112 x 3008 but also allows for area of interest selection, as well as binning, and decimation via software. This high frame rate version also has a burst mode function that buffers the acquired images and decouples the acquisition from the image output, allowing the sensor's maximum frame rate to be used independently of the available bandwidth.

The camera has large RAM and FPGA (field-programmable) integrated boards that provide for reliable processing and customization. The FPGA board reduces the CPU load and allows for more functions to be added. The camera also has a fully GenICam compliant mvIMPACT SDK that enables even more flexibility -- complete documentation of the SDK gives you access to many special camera features that could simplify your vision system development. The camera's driver is also compatible with a wide range of 3rd-party software, including those from Halcon, Matlab, and Labview.

Area Scan Machine Vision Camera    12.4MP 1.1" Sensor, Global Shutter    Up to 4112 x 3008 Resolution    3.45μm Pixel Size    30 Hz Frame Rate    High Frame Rate Burst Mode    On-Board Color Processing    12-Pin Hirose I/O Connector    GenICam Compliant mvIMPACT SDK    Member of AIA Machine Vision Association

Area scan machine vision camera

12.4MP, 1.1" Sony Pregius IMX253 CMOS sensor with a global shutter

4112 x 3008 resolution (with area of interest selection, binning, and decimation)

3.45μm pixel size

30 Hz frame rate (with burst mode)

On-board color processing

12-pin I/O connector for power input, trigger input, and trigger output

C-mount lens mount

USB 3.0 interface

Large RAM and FPGA boards

GenICam compliant mvIMPACT SDK

Driver is compatible with many 3rd-party software

Counter and timers

Sequence recording using parameter sets

Event notifications

Support for additional information via data streams

Integrated IR cut filter

Member of AIA Machine Vision Trade Association

TC2MHR, TC4MHR, TCCR2M, TCCR4M, TCDP Plus, TCCX2M, MZMT, EN2M, ENUV2M, EN4K

Related Questions and Answers

Q: 1. Does this require a dvr or is it independent and just needs a network connection?

A: Compatible with select Lorex NVRs (required) Program preset viewing points and tours from your NVR Remote control of camera via smartphone or tablet when connected to an NVR IR cut filter enables day and night functionality Color Night Vision and ClearNight technology help produce clear images in low light conditions NTSC and PAL video formats DC auto iris with hall effect Internal sync system 50 dB S/N ratio with automatic gain control turned off 100M Ethernet port PoE+ or 12 VDC power (DC power supply available separately)

Q: 2. Can this model write to the SD card reader on the camera?

A: This camera does not offer edge recording to a memory card. It has no memory card reader.

Q: 3. Is this camera ONVIF compatible? I just purchased and received it from B&H but the documentation doesn't give me confidence it is ONVIF compatible. Would like to know before I unpack it.

A: The Lorex LNZ44P12B camera works with NVRs Easily connect this IP camera to Lorex 2K IP NVRs, the camera is also compatible with NVRs that support ONVIF protocols.

Q: 4. Is this compatible with the N86264T-89AB system? I think it said that the compatible camera needed to be IP

A: Yes. The Lorex LNZ44P4B 4MP Outdoor PTZ Network Dome Camera with Color Night Vision B&H # LOLNZ44P4B is a recommended camera for this NVR N86264T-89AB system. This is a recommended camera also: Lorex E892AB-E 4K UHD Smart Deterrence Outdoor Network Bullet Camera with Night Vision B&H # LOE892ABE https://bhpho.to/3aVCxfw Key Features: 3840 x 2160 Resolution at 15 fps Night Vision up to 98' in Total Darkness Color Night Vision Technology 2.8mm Fixed Lens 108° Horizontal Field of View Two-Way Audio & Remote-Triggered Siren Dual Motion-Activated LED Spotlights Smart Motion Detection Plus RJ45 Ethernet with PoE Technology IP67 Rated for Outdoor Use

Q: 5. Does this camera support video over RTSP or RTMP?

A: This camera does not support RTSP or RTMP.

Q: 6. Is the Lorex LNZ44P4B 4MP Outdoor PTZ Network Dome compatible with a Hikvision NVR?

A: It is onvif compatible and Hikvision Nvr's work with onvif cameras.

Q: 7. does lorex manufacture this model with an audio mic ? to record audio/video

A: This Lorex LNZ44P4B 4MP Outdoor PTZ Network Dome Camera does not support audio capture. However, most Lorex NVR recorders have RCA audio inputs where you could connect a mic.

Q: 8. Does this camera have any environmental controls like a defroster?

A: The Axis Communications Q6225-LE 2MP Outdoor PTZ Network Camera with Night Vision & Wiper (60 Hz), BH # AXQ6225LE, has no environmental controls except for the wiper feature and its IP68 & NEMA 4X rating for outdoor use. The operating temperature is -58 to 131°F / -50 to 55°C.

Q: 9. Hi, how sensitive is the COMS chip to the IR? How many Nm's? Is it sensitive to or just over 1000nm's?

A: The SiOnyx Aurora PRO Night Vision Camera will utilize a 1 chip 1"cmos sensor, sensitive up to 1,100nms.

Q: 10. N86264T-89AB system? I think it said that the compatible camera needed to be IP

A: This is an IP camera. Lorex recommends this camera: Lorex E892AB-E 4K UHD Smart Deterrence Outdoor Network Bullet Camera with Night Vision B&H # LOE892ABE https://bhpho.to/38NPm96 Key Features: 3840 x 2160 Resolution at 15 fps Night Vision up to 98' in Total Darkness Color Night Vision Technology 2.8mm Fixed Lens 108° Horizontal Field of View Two-Way Audio & Remote-Triggered Siren Dual Motion-Activated LED Spotlights Smart Motion Detection Plus RJ45 Ethernet with PoE Technology IP67 Rated for Outdoor Use