The Tensioned Cosmopolitan Electrol 72.5 x 116" 16:10 Screen with High Contrast Da-Mat Surface (White Case, 220V) from Da-Lite is suitable for wall or ceiling-mounted installations.

137" Diagonal, 16:10 Aspect Ratio    High Contrast Da-Mat Screen Surface    0.8 Gain, 90° Viewing Angle    Smooth Roll Technology    Tensioning Cable System    Decora 3-Position Wall Switch    Slim-Tab Low-Profile Design    Video Projector Interface    Silent Motor    White Case

• High Contrast Da-Mat is a vinyl surface that features a dark gray base for deeper reproductions of black, which improves the perception of contrast. Best in environments with a high output projector and completely controlled ambient light, High Contrast Da-Mat has a gain of 0.8 and a cone of 90°.

• In-the-roller motor mounting system
• Smooth Roll Technology to keep your screen perfectly flat
• Tensioning Cable System to prevent warping and ensure even lateral tension
• Standard black backing retains projected brightness on front projection surfaces
• Features decora-style, three-position wall switch
• Seamless surface
• Standard black backing
• Slim-Tab stronger tab design to keep your screen perfectly taut
• Standard white powder-coated finish

Related Questions and Answers

Q: 1. Could I use the line outputs with active studio monitors?

A: The LINE outputs of the RME ADI-2/4 Pro SE 2-AD/4-DA 768 kHz, High-Performance Converter (Black Edition),BH # RMDI24PROSE, may be used to drive most active (powered) studio monitors.

Q: 2. What is the DSD sampling rate?

A: The RME ADI-2/4 Pro SE 2-AD/4-DA 768 kHz, High-Performance Converter supports sample rates between 44.1 kHz and 768 kHz and DSD will not become active at sample rates below 176.4 kHz. The DSD rate changes with the chosen sample rate. Sample rates higher than 192 kHz and DSD128/256 are only available in 2-channel mode. At a sample rate of 768 kHz, which is the highest available sample rate, the DSD rate is 256.

Q: 3. How to get the front panel display out to a larger video display?

A: There is no way to connect the front panel display from the RME ADI-2/4 Pro SE High-Performance Converter to a larger video display, but you can run the free RME Digicheck app on a Mac or Windows computer to be able to view the same metering from the spectral analyzer, as well as more options, on a large monitor connected to the computer. Additionally, an ADI 2 Remote app will be available soon that will enable full control from a computer.

Q: 4. HOW DOES IT PRINT OBJECTS WITH LARGE OVERHANG ? WHAT I MEAN IS , CANTILEVERED...DOES IT REQUIRE SUPPORT MATERIAL FOR THE OVERHANGING PART?

A: The build volume is maximum: 5.9 x 5.9 x 5.9 material. It does not require support for large overhang. You will need to experiment to see what the filament support limit is.

Q: 5. What size filament

A: The XYZprinting da Vinci Junior 1.0 3D Printer uses 1.75mm filament.

Q: 6. How tall is the enlarger at a normal setting for 8x10 printing? I have a low ceiling so I want to make sure it will fit.

A: The maximum height of the Beseler 23CIII-XL Variable Contrast (Black & White) Enlarger is 54".

Q: 7. good for mastering? I want to go DAW USB RME ADI ANALOG OUT some outboard gear RME ADI ANALOG IN - USB DAW

A: Yes, the RME ADI-2/4 Pro SE 2-AD/4-DA 768 kHz, High-Performance Converter (Black Edition) would be suitable for mastering.

Q: 8. What are the XLR inputs for? Microphone?

A: The XLR inputs on the RME ADI-2/4 Pro SE are analog line inputs, not mic inputs -- so you can connect a device that outputs line level directly into it, like a mixer for example.

Q: 9. Is the lens barrel (including the extension), made of metal or composite (plastic)?

A: The lens barrel is a combination of poly carbonate and metal.

Q: 10. Does this model use the AKM chipset?

A: The RME ADI-2/4 Pro SE 2-AD/4-DA 768 kHz, High-Performance Converter uses the ES9822Pro chip.