Add height effect channels to your compatible home theater system with this pair of piano gloss white SVS Prime Elevation 2-Way Atmos Add-On Speakers. The feature an angled front baffle, so they can be placed on the wall near the ceiling with the included wall mount for height effects without the required sound reflection of up-firing speakers. They use a 1" aluminum dome tweeter and a 4.5" polypropylene cone woofer and accept 20 to 150W of power from your amplifier.

Alternative placement options are available, such as low-angle up-firing or side-firing speakers, left-/center-/right-channel configurations with a third Prime Elevation speaker, or left/right setups.

20 to 150W Recommended Amplifier Power    2-Way Speaker Design    4.5" Polypropylene Cone Woofer    1" Aluminum Dome Tweeter    55 Hz to 25 kHz Frequency Response    MDF Cabinet    Alternate Use in L/C/R Configuration

The Prime Elevation is designed to accurately radiate the height effects of your movies. Place it high on a wall near the ceiling, and object-based surround sound can be enjoyed at full fidelity in nearly any room, without using ceiling bounce or in-ceiling speakers.

The included Multi-Angle Wall Bracket allows for hanging the speaker in any of four directions (up- or down-firing, and side- or rear-firing). Also included is a universal mounting option with a 1/4"-20 brass insert that works with other kits. As a finishing touch, the magnetic SVS logo on the grille is adjustable to accommodate positioning.

The angled front baffle is designed to deliver enhanced direct radiating height effects and enable versatility in nearly any channel position.

The angled front baffle and Multi-Angle Wall Bracket combine to add versatility to the Prime Elevation speaker. Engineered to address a multitude of room challenges, the Prime Elevation is well suited for imperfect room placement options:

• Down-firing height-effects speaker – placed high on a side wall, the directly radiated sound is designed to provide more direct sound than "ceiling bounce" solutions.
• Up- or down-firing front, L/C/R (left/center/right) and/or center channel speaker – placed above or below the viewing area, directed at the listener, when placement at ear level isn't possible.
• Side- or rear-firing surround speaker – placed on a side wall for rear effects, or on the rear wall for side effects, when optimal placement is not possible.

The cabinet is designed to be resonance-free, with MDF walls and bracing for enhanced acoustics.

The 4.5" poly midrange/bass woofer features an augmented stiffness-to-mass ratio for accurate dynamics at all drive levels.

The 1" aluminum dome tweeter uses an FEA-optimized diffuser for clear high frequencies with enhanced transparency and refinement.

The SoundMatch crossover is designed to blend tweeter and woofer output for enhanced balance, accuracy, and overall performance across the frequency spectrum.

• Aluminum shorting ring in mid-woofer helps reduce gap inductance, lower distortion, and enhance high frequency response
• Cast ABS-fiberglass composite basket in mid-woofer helps ensure precision component alignment and augmented thermal transfer
• Vented voice coil former minimizes air compression artifacts in mid-woofer

• Cloth grille with pin/cup retention system
• Elastomer stick-on bumper feet
• Chamfered front baffle and flush-mounted drivers help reduce edge diffraction and enhance off-axis high-frequency response

Related Questions and Answers

Q: 1. Support 240v?

A: The SVS 4000-series subwoofers are auto-switching for AC voltage and will support 100-250V. Ed M - SVS

Q: 2. Hi is this compatible with any receiver example vsx-532 pioneer

A: The SVS PB16 will be compatible with any receiver that uses RCA connection to connect an external subwoofer.

Q: 3. will these speakers go with my b&w speaker set up?

A: While they are not matched acoustically, Yes you can use this with just about any speaker.

Q: 4. CAN I USE ELAC 2.0 A4.2 HAS REAR ATMOS SPEAKERS FOR dobby speaakers?

A: The ELAC Debut 2.0 A4.2 Atmos Add-On Speakers (Pair), BH # ELDA42BK, may be used for the Dolby Atmos channels.

Q: 5. How many speakers are included (1 or 2) at this price ($198)?

A: This is a pair of speakers.

Q: 6. Can I request the 220V version?

A: We are not able to get the 220V model.

Q: 7. Hi, I have a Sony STR -DN 1080 reciver. Will these 2.5 ohm surround end 4 ohm center soeakers, work okay or not!? with my amp.

A: These speakers are 6 ohm, and they will work with your STR-DN1080

Q: 8. what is max spl output of the svs pb16ultra?

A: The standard for measuring subjectively clean maximum dynamic output is CEA-2010. There are accurate 3rd party measurements available for the PB16-Ultra at the below link. These were obtained outdoors, away from reflective structures, with the mic on the ground plane at a distance of 2 meters. Indoor SPL will naturally be considerably higher than these measurements with boundary reinforcement and room gain considered.a href= https://www.audioholics.com/subwoofer-reviews/svs-pb16-ultra-subwoofer target= _blank https://www.audioholics.com/subwoofer-reviews/svs-pb16-ultra-subwoofer/aEd M - SVS

Q: 9. I have a 17 foot sloped ceiling. Would these speakers be better sitting on top of my sony towers or hanging on the wall?

A: Best on the wall in this particular case.

Q: 10. SVS Prime Elevation speakers using them as main front LCR speakers and dolby atmos Klipsch R-41SA would be fine?

A: The SVS speakers are meant specifically for the Atmos feature. Unfortunately you may not get the same type of audio compared to Standard Front Left and Right Speakers.