The M2T IEM Digital Half-Rack Transmitter with Dante from Lectrosonics features transmission power up to 50 mW for extended operating range and locking XLR/TRS combo connectors, that facilitate up to four channels of analog audio sources. The Dante connection is equipped with two RJ45 connectors, four audio RX channels, and is internally routable. With ultra-low latency, 24-bit audio, and two stereo-digital channels, the M2T is an IEM transmitter for professional broadcast applications.

Built with a USB port for firmware updates and an IR port for fast setups, the M2T transmitter has a large, high-resolution backlit color LCD with large membrane switches for an intuitive interface visible in daylight or dimly-lit conditions. Analog signals are converted to an internal 24-bit digital format that is encoded, organized into packets, and passed to an RF modulator. The RF signal is filtered before and after amplification to suppress out-of-band noise and spurious signals.

Additionally, the M2T transmitter employs a technology that provides a frequency response from 20 Hz to 15 kHz with maximum channel separation. This digital audio technology eliminates a compandor and the associated artifacts, resulting in crystal clear sound, rock-solid stereo imaging, and low distortion.

IEM Wireless Monitor with Digital RF    24-Bit Digital Audio    USB Port for Firmware Updates    Analog Inputs and Dante Compatible    IR (Infrared) Port for Fast Setup    Up to 50 mW per RF Carrier    All Metal Housing    Works with Wireless Designer Software

Related Questions and Answers

Q: 1. What is the expected runtime for the SMDWB on Eneloop Pro 2450s and Energizer Lithium (the data sheet only shows Alkaline, which seems possibly incorrect)?

A: The battery run time for the Lectrosonics SMDWB with AA lithium, disposable batteries is. At 50 mW (2 x AA): 14.5 hours and at 100 mW (2 x AA): 14 hours.

Q: 2. in terms of heat dissipation, is it safe to operate this inside a K-Tek Stingray audio bag for IFB?

A: Yes it is safe to operate the Sennheiser SR IEM G4 Stereo Transmitter inside of an audio bag for IFB.

Q: 3. Can I create a flexlist with this transmitter and the m2r?

A: Yes. On page 12 of Operators Manual it is described: Selecting M2R Receiver Functions The M2R Receiver includes a FlexList™ mode where up to 16 mixes can be accessed by name. This feature enables a user to quickly find and listen to any of the performer’s mixes on the stage. The mix includes the name, frequency, mixer settings and limiter settings. The mix is easily shared via the M2R IR port, added to the list of 16 mixes and stored until cleared by the user. The M2R allows the user to toggle between the mixes, making troubleshooting issues easy and efficient. Flex Sync DCHT, DCHT/E01 information to the M2R FlexList either as one stereo Channel or individual channels: - SendTx: Send (sync) all receiver information to the M2R FlexList as one stereo channel - SendCh1: Send (sync) Channel 1 unique information to the M2R FlexList - SendCh2: Send (sync) Channel 2 unique information to the M2R FlexList - SendM12: Send (sync) a mono mix of both channels to the M2R FlexList Use th

Q: 4. Does the transmitter come with a belt clip included?

A: The Lectrosonics LMb Digital Hybrid Wireless Beltpack Transmitter does come with a metal belt clip.

Q: 5. Could these, along with the DCHR, be used as another set of talent wireless sets to be plugged into a mixer/recorder?

A: The Lectrosonics DCHT Wireless Digital Camera Hop Transmitter can be used together with the Lectrosonics DCHR Camera-Mount Miniature Digital Camera Hop Wireless Receiver as a wireless IFB system to send audio from a mixer/recorder.

Q: 6. Do I need to purchase anything else beside the antena?

A: This should work with any receiver but this antenna needs DC power. Many receivers can supply DC at the antenna port, but if yours does not you'd need to consider how you are going to supply power to it. You can use a DC power supply if you are close enough to an AC outlet. If not, you'd need to supply power via a DC inserter between the receiver antenna jack and the cable to the antenna. Lectrosonics makes this. Part number is BIAST and also needs a CH12 power supply.

Q: 7. Hello! This package have two receivers only; Can I use more receivers for same transmitter over same frequency?

A: Yes, you can add more recievers, which would all receive the same mix. The appropriate reciever is the Sennheiser EK IEM G4 Stereo Bodypack Receiver with IE 4 Earphones (A: 516 to 558 MHz), BH #SEEKIEMG4A.

Q: 8. Can I use this device to transmit Zoom meetings? So my presenters can listen to the questions in ear?

A: Yes you csn send the audio from a computer into an audio interface or mixer and out to the Sennheiser ew IEM G4-Twin Wireless Monitor System Kit.

Q: 9. What frequencies does this transmit on?

A: The Sennheiser SR 2050 (A+) transmits on 470 MHz to 558 MHz.

Q: 10. Do non servo ta5f connectors work with the lmb transmitter?

A: Yes, the Lectrosonics L-Series LMb Bodypack Wireless Transmitter and all other Lectrosonics transmitters with 5-pin inputs have servo bias inputs that can also be used with other conventional wiring configurations.