16 Channel Wireless Router

Matrix Switch 16 X 16 Composite Analog Video Router With Button Panel (1 Ru)

Product Code: ga41237
Availability: In Stock

$7,424.85 $9,800.80

Qty

14 reviews Write a review

Description
Reviews (14)

The 1 RU 16 x 16 Composite Analog Video Router from Matrix Switch features 16 BNC inputs and 16 BNC outputs. It has a minimum signal bandwidth of 50 MHz. This router features a built-in webpage interface for control and configuration using a PC or mobile device (Interactive Demo). It supports MASCOT protocol and select 3rd party protocols. Additional control interfaces on this router include USB, RS-485, RS-232, AUX GPIO, and TCP/IP over the Ethernet interface. Remote panels (available separately) can be used with this router for remote control over TCP/IP. The built-in button panel provides an additional interface for directly changing the matrix routing state.

This analog video router can be used standalone or combined with additional analog video routers (available separately) to produce a 2-channel YV router or 3-channel YUV or RGB router. When used in conjunction with the MSC-GCP2U32 LCD remote control panel, multiple analog video routers can be combined to expand the available input or output channels, using cascaded systems or input replication.

16 BNC Inputs 16 BNC Outputs Minimum Signal Bandwidth of 50 MHz Built-In Webpage Interface USB, RS-485 & RS-232 Control AUX GPIO & TCP/IP Ports Button-Control Panel Interface Real-Time Operating System

Input
Video Inputs	16 x BNC
Output
Video Outputs	16 x BNC
Connectivity
Other I/O	1 x RJ45 LAN 1 x DB-25 GPI Output 1 x DE-9/DB-9 RS-232 Output 1 x USB (Unspecified Type) Control 1 x BNC Sync Input 1 x BNC Reference Output
Power
Power I/O	2 x DE-9 (12 VDC at 5 A) Input
General
Certifications	CE, FCC, RoHS, UL, as per Manufacturer
Rack Form Factor	1 RU
Dimensions	19 x 1.75 x 6" / 48.26 x 4.45 x 15.24 cm
Weight	5 lb / 2.27 kg
Packaging Info
Package Weight	9.65 lb
Box Dimensions (LxWxH)	24 x 10.5 x 6.7"

An optional audio router can be connected to a DB-25 connector with breakaway function from video support

Inputs can be switched to multiple outputs without restriction

Vertical interval switching using vertical sync input (Tri-level sync or NTSC/PAL black burst)

Store and recall up to 10 preset salvos

Includes button-control panel interface

Supports Matrix Switch Corporation Remote Panels

Ethernet port for control via built-in web page interface or TCP/IP ports

Interactive web page interface (Interactive Demo)

Serial control via RS-232 port

RS-485 port for an additional high-speed, long-distance capable control interface

Support for select 3rd party protocols for added integration flexibility

Auxiliary port for external status and control signaling

Real-Time Operating System (RTOS) with 32-bit ARM processor

System software updates from webpage interface

External DC power supply

Redundant power supply included

Low crosstalk and noise levels

Related Questions and Answers

Q: 1. Does this monitor support HMDI loop-through with HDMI-DVI adapters?

A: While this connection set up with this monitor is unknown, we feel it should work as desired.

Q: 2. The description mentions a remote control, but the in the box does not list a remote control. Does it come with a remote control?

A: It comes with an IR Remote Control.

Q: 3. Can the shape Arm screw right on to the top of the Canon C200B body?

A: The top of the C200B has 1/4"-20 so no, these 3/8"-16 screws will not work.

Q: 4. Will this work with SDI signal?

A: No it will only work with Composite Video.

Q: 5. What is the audio processing latency between audio in and out?

A: The Matrix Switch 16 x 16 Analog Audio Router with Button Panel has a less that 1ms delay.

Q: 6. Is the audio mute function available through the web interface? We want to mute the audio on inputs until the music on the video feed stops playing.

A: Mute is available on the web interface but for me it changes the screen to black and mutes audio.

Q: 7. Can this display 1280x1024 ?

A: This can only support resolutions up to 800 x 480. For a monitor that supports 1280 x 1024 you would need something larger such as the Tote Vision 17 Monitor LED-1708HDR. For a 7 dual display we have the Elvid StudioVision Dual 7 Monitor Rackmount which goes up to 1280 x 800 Resolution.

Q: 8. is this 50 Ohm or 75 Ohm?

A: Since this is for Composite video signals and not for power or control, the unit is 75 Ohm.

Q: 9. Will this unit install in a 19 inch rack or is the rackmount kit built for a larger size rack?

A: The Rack mount adapter kit is for a standard 19" rack.

Q: 10. Do these monitors accept an outgoing SDI signal?

A: Hello WOA. I apologize for the confusion- Despite the 16:9 ratio, these units do not support SDI input or output, just Composite, VGA and DVI. Thank you!

Steve	28/09/2024
Been looking for a while this is well made. 5

Mike	24/08/2024
Bag is built very well and looks great. Was able to for my Pentax 6x7, and 2 smaller point and shoots with about 40 rolls of film 5

Dan	15/08/2024
This design is so easy to work with. you can open it while carrying or set it down. Best of all if you are on a dirty or sandy surface there is no lid of the bag to fall into the sand and bring sand into the bag with! Excellent design and big enough for a professional DSLR! 5

Kannan	07/08/2024
This is a fantastic bag, well made and a very practical design. The way it opens is so convinient to take out the camera and accessories. I have my GH5 (with Sigma 18-35) in its cage and one side handle attached, two extra lenses, another side handle for the cage, on-camera mic, 5" field monitor, 6 batteries for the GH5, three batteries for the monitor, two spare batteries for the mic, one audio interface (Saramonic smartrig+), one lav mic, lens cleaning g kit and a few memory cards. Last week was when I first used this. Pretty much all I can ask for. Quality craftsmanship:) 5

Mark	13/07/2024
I purchased this bag not for video but for two Digi Bees with accessories and umbrella reflectors. I have to say this bag was a perfect fit for a two light kit!! 5

Manuel	21/06/2024
The bag is very well made, I really like it. I can fit my camera, fz300, magic arm, two super clamps, Manfrotto 496 RC2 ball head, Panasonic Stereo Shotgun mic DMW-RS2, Panasonic DMW-RS1 remote shutter release, and finally Tenba tool box 4. All of the contents I just listed fit into the bag just fine, I would suggest the #21 or larger bag if you have a bigger camera with telephoto lens. Again, I am very happy with this bag, everything I need is in one bag, a big plus. 5

Cristian	06/06/2024
It does the job in a simple, yet functional way. 5

Antonio	04/06/2024
A review from Cinematography Database https://youtu.be/7495jfO3vWs Convinced me that a fully assembled rig from an upward facing access (Doctor Style) bag was the answer to quick and easy access to a full assembled rig. This proven to be true. A great bag! The Tenba Lens wrap and re-enforced dividers are an awesome addition to this setup, as well as the lens padded holders. But, the unique doctor style zipper access on the top is this bag's key component. I recommended it. 5

Razvan	24/05/2024
Fits my full assembled rig with side handle, focus motor, top handle, vmount battery and monitor + a couple of lenses and other goodies inside. 5

James	21/05/2024
This bag fits our Panasonic HC-X2 like a glove. I wasn't looking to have this bag fit much more than this rather large camcorder, and you couldn't find a better fit than this. There is a little space for an accessory or two, perhaps throw another small camera down the side, or a set of headphones... you are golden. It feels sturdy and well-made, as well as being quite aesthetically-pleasing. I'm extremely pleased, and will be exploring more Tenba bags in the future. 5