The BlueFox3 USB3 Vision Camera from MATRIX VISION is an area scan machine vision camera for inspecting products on assembly lines, gauging and measuring quality, inspecting defects, label inspection on bottles, and more. It allows you to get a physical image of a product onto the computer in two-dimensional space and measure accuracy/inaccuracy by counting the number of pixels. Featuring a C-mount lens mount, the BlueFox3 supports any C-mount lens, including a wide range of MATRIX VISION telecentric lenses. MATRIX VISION is part of the AIA Machine Vision Trade Association.

This version of the camera features a 2.4MP, 1/1.2" sensor, 161 Hz frame rate, and on-board color processing. The camera captures images at a resolution of 1936 x 1216 but also allows for area of interest selection, as well as binning, and decimation via software. This high frame rate version also has a burst mode function that buffers the acquired images and decouples the acquisition from the image output, allowing the sensor's maximum frame rate to be used independently of the available bandwidth.

The camera has large RAM and FPGA (field-programmable) integrated boards that provide for reliable processing and customization. The FPGA board reduces the CPU load and allows for more functions to be added. The camera also has a fully GenICam compliant mvIMPACT SDK that enables even more flexibility -- complete documentation of the SDK gives you access to many special camera features that could simplify your vision system development. The camera's driver is also compatible with a wide range of 3rd-party software, including those from Halcon, Matlab, and Labview.

Area Scan Machine Vision Camera    2.4MP 1/1.2" Sensor, Global Shutter    Up to 1936 x 1216 Resolution    5.86μm Pixel Size    161 Hz Frame Rate    High Frame Rate Burst Mode    On-Board Color Processing    GenICam Compliant mvIMPACT SDK    Member of AIA Machine Vision Association

Area scan machine vision camera

2.4MP, 1/1.2" Sony Pregius IMX174 CMOS sensor with a global shutter

1936 x 1216 resolution (with area of interest selection, binning, and decimation)

5.86μm pixel size

161 Hz frame rate (with burst mode)

On-board color processing

C-mount lens mount

USB 3.0 interface

Large RAM and FPGA boards

GenICam compliant mvIMPACT SDK

Driver is compatible with many 3rd-party software

Counter and timers

Sequence recording using parameter sets

Event notifications

Support for additional information via data streams

Integrated IR cut filter

Member of AIA Machine Vision Trade Association

TC2MHR, TC4MHR, TCCR2M, TCCR4M, TCDP Plus, TCCX2M, MZMT, EN2M, ENUV2M, EN4K

Related Questions and Answers

Q: 1. What size/shape of backing box ( wall box ) is recommended for installation?

A: The Lorex LNZ44P12B 4MP Outdoor PTZ Network Dome Camera with Color Night Vision BH #LOLNZ44P12B would work with a strongly constructed back box approximately 6' x 8' rectangular shape. This camera weighs in at about 7 lbs.

Q: 2. Does this camera have any environmental controls like a defroster?

A: The Axis Communications Q6225-LE 2MP Outdoor PTZ Network Camera with Night Vision & Wiper (60 Hz), BH # AXQ6225LE, has no environmental controls except for the wiper feature and its IP68 & NEMA 4X rating for outdoor use. The operating temperature is -58 to 131°F / -50 to 55°C.

Q: 3. What’s the dimensions it captures

A: This camera will be able to capture up to a 44 ft wide and as narrow as 10.9 ft across.

Q: 4. N86264T-89AB system? I think it said that the compatible camera needed to be IP

A: This is an IP camera. Lorex recommends this camera: Lorex E892AB-E 4K UHD Smart Deterrence Outdoor Network Bullet Camera with Night Vision B&H # LOE892ABE https://bhpho.to/38NPm96 Key Features: 3840 x 2160 Resolution at 15 fps Night Vision up to 98' in Total Darkness Color Night Vision Technology 2.8mm Fixed Lens 108° Horizontal Field of View Two-Way Audio & Remote-Triggered Siren Dual Motion-Activated LED Spotlights Smart Motion Detection Plus RJ45 Ethernet with PoE Technology IP67 Rated for Outdoor Use

Q: 5. Is the Lorex LNZ44P4B 4MP Outdoor PTZ Network Dome compatible with a Hikvision NVR?

A: It is onvif compatible and Hikvision Nvr's work with onvif cameras.

Q: 6. Does this camera support RTMP?

A: The Lorex LNZ44P12B 4MP Outdoor PTZ Network Dome Camera with Color Night Vision BH #LOLNZ44P12B does not support RTMP

Q: 7. Does this require a dvr or is it independent and just needs a network connection?

A: Compatible with select Lorex NVRs (required) Program preset viewing points and tours from your NVR Remote control of camera via smartphone or tablet when connected to an NVR IR cut filter enables day and night functionality Color Night Vision and ClearNight technology help produce clear images in low light conditions NTSC and PAL video formats DC auto iris with hall effect Internal sync system 50 dB S/N ratio with automatic gain control turned off 100M Ethernet port PoE+ or 12 VDC power (DC power supply available separately)

Q: 8. Can this model write to the SD card reader on the camera?

A: This camera does not offer edge recording to a memory card. It has no memory card reader.

Q: 9. does lorex manufacture this model with an audio mic ? to record audio/video

A: This Lorex LNZ44P4B 4MP Outdoor PTZ Network Dome Camera does not support audio capture. However, most Lorex NVR recorders have RCA audio inputs where you could connect a mic.

Q: 10. Does this camera follows movement?

A: Lorex LNZ44P12B 4MP Outdoor PTZ Network Dome Camera with Color Night Vision does not track.