The tan B6 Omnidirectional Lavalier from Countryman is a miniature lavalier microphone measuring only 0.1" in diameter. It features a 3.5mm locking connector and connects to select Zoom recorders with audio on the left and right channels. The B6 microphone provides high-quality audio with low distortion at SPL up to 120 dB on 48V phantom power. The aramid cable combined with the ultra-thin diaphragm ensure low handling noise. And the tiny size combined with natural sound pickup make the microphone easy to position, for ambient noise and feedback rejection.

The included changeable protective caps (+0, +4, and +8 dB) provide moisture resistance, allowing you to adjust the frequency response to suit different applications or to match other microphones. Each of the three omni caps has a different high-frequency response characteristic that controls the amount of crispness or sibilance (response at 15 kHz). This microphone ships with the attached +4 dB protective cap that boosts the perceived amount of presence in your sound, while leaving the lower frequencies unchanged. You can switch to the 0 dB cap in case of problems with high-frequency feedback.

With low-handling noise and a rugged construction, the B6 microphone is a suitable choice for theater, broadcast, places of worship, and general lavalier applications.

Zoom H1, H2, and H2n recorders with audio on left and right channels

Can be easily hidden in the hair, on costumes, or can be taped to a performer's face

W4 (gray band) standard sensitivity is suitable for general speaking, such as presentations or public addresses, where the microphone is positioned on the chest or lapel

Provides high-quality audio with low distortion at SPL up to 120 dB on 48V phantom power

Comes with three changeable protective caps (+0, +4, and +8 dB)

Resistant to makeup, sweat, and moisture when used with the supplied protective caps

Protective caps can be easily removed for cleaning or replacement when clogged with makeup

Related Questions and Answers

Q: 1. What is the distance, center to center, of the 1/4x20" mounting screws? One of the photos says 18mm side spacing, but I'm not sure if they are referring to the distance between the screws.

A: This handle is designed to work with Smallrig cages and Smallrig does not provide the spacing information.

Q: 2. Could you fit a Zoom H6 in this bag? Was planning on upgrading to a better recording unit down the road but was really curious.

A: The Zoom H6 will fit into this bag, but because it has XLR mic connections on the two sides of the unit, you may have difficulty making it work when sources are connected. Access to these connections would also be limited. Perhaps, a reasonably-priced case such as the Zoom PCH-6 Protective Case for Zoom H6 Handy Recorder, BH #ZOZPCH6 could be used until you upgrade to a larger mixer.

Q: 3. Would you recommend Orca 28 or 30 for Sound Devices Mix Pre-3 + accessories?

A: Yes.

Q: 4. Will the TascM DR-680MKII FIT IN THIS BAG?

A: Its a little short on the depth.

Q: 5. i recently bought a F8n and intend to buy this bag. But, I'm wondering. With the zoom recorder, how many wireless receivers can it fit?

A: This recorder has eight inputs, you can use all of them for wireless mics if you would like,

Q: 6. Will this mic work work with a TASCAM DR-40? And do I need any other accessories like xlr cable to use it?

A: This mic will connect directly to a TASCAM DR-40 via a standard XLR cable: The Kopul Studio Elite 4000 Series XLR M to XLR F Microphone Cable (6') is a studio-quality cable for connecting mics to mixers, preamps, audio interfaces and recorders; or to be used in any other application where XLR connectivity is required. The cable is engineered to be both quiet and durable, and is well-suited for critical recording and broadcast situations. B&H# KOM4006. http://bhpho.to/1qfqgR7

Q: 7. I'm getting a SD Mix-pre 6 ii, should I get this bag (OR-28) or the (OR-27). They seem so similar other that this one being a little wider. Is that the only difference?

A: The Mixpre-6 II will fit in both the OR-28 and OR-27. The two Orca bags are very similar in design but differ in their width and height. Dimensions of the Mixpre-6 II are 6.5 x 1.4 x 4.6" (166 x 36 x 118mm). The interior of the OR-28 is 8.5 x 4.5 x 6.5" (215 x 115 x 165mm) and the smaller OR-27 is 8.5 x 3.5 x 5.1" (215 x 90 x 130mm), The interior of the OR-28 is 0.98" (25mm) wider and 1.38" (35mm) taller than the interior of the OR-27.

Q: 8. As I understand, the mic gets the power from the Tascam phantom +48V OR from the supplied power module. Please clarify. Can I plug the mic directly into Tascam XLR or I need an additional adapter? Thanks in advance.

A: The phantom power comes from the included power adapter. You can plug the XLR otput into any device that accepts a mic level signal without needing additional power.

Q: 9. What does the microphone cable measure?

A: The AT803 features a 6 foot, 2.6mm diameter cable.

Q: 10. Does this bag come with a boom pole holder like some of the larger bags?

A: Hello Aiden,Thank you, for your interest in Orcabags ProductThe OR-28 comes with the two holders for the boom pole at the front of the bagLike the rest of Orca Sound Bags Please do not hesitate to contact us for further info or support,Orca Bags Team.