High Quality Lavalier Microphone

Countryman B6 Omnidirectional Lavalier For Zoom Recorders With Left/right-ch Audio & Standard Gain (white)

Product Code: ga41391
Availability: In Stock

$1,350.00 $1,701.00

Qty

1 reviews Write a review

Description
Reviews (1)

The white B6 Omnidirectional Lavalier from Countryman is a miniature lavalier microphone measuring only 0.1" in diameter. It features a 3.5mm locking connector and connects to select Zoom recorders with audio on the left and right channels. The B6 microphone provides high-quality audio with low distortion at SPL up to 120 dB on 48V phantom power. The aramid cable combined with the ultra-thin diaphragm ensure low handling noise. And the tiny size combined with natural sound pickup make the microphone easy to position, for ambient noise and feedback rejection.

The included changeable protective caps (+0, +4, and +8 dB) provide moisture resistance, allowing you to adjust the frequency response to suit different applications or to match other microphones. Each of the three omni caps has a different high-frequency response characteristic that controls the amount of crispness or sibilance (response at 15 kHz). This microphone ships with the attached +4 dB protective cap that boosts the perceived amount of presence in your sound, while leaving the lower frequencies unchanged. You can switch to the 0 dB cap in case of problems with high-frequency feedback.

With low-handling noise and a rugged construction, the B6 microphone is a suitable choice for theater, broadcast, places of worship, and general lavalier applications.

Performance
Equivalent Noise Level	24 dB (A-Weighted)

Zoom H1, H2, and H2n recorders with audio on left and right channels

Can be easily hidden in the hair, on costumes, or can be taped to a performer's face

W4 (gray band) standard sensitivity is suitable for general speaking, such as presentations or public addresses, where the microphone is positioned on the chest or lapel

Provides high-quality audio with low distortion at SPL up to 120 dB on 48V phantom power

Comes with three changeable protective caps (+0, +4, and +8 dB)

Resistant to makeup, sweat, and moisture when used with the supplied protective caps

Protective caps can be easily removed for cleaning or replacement when clogged with makeup

Related Questions and Answers

Q: 1. Does this also come with the Orca padded shoulder strap?

A: Yes it does come with the shoulder strap.

Q: 2. Can I connect this to Shure BLX1 wirless pack?

A: Yes, the Shure TwinPlex TL48 Omnidirectional Lavalier Microphone is compatible for use with the Shure BLX1 Wireless Bodypack Transmitter.

Q: 3. What does the microphone cable measure?

A: The AT803 features a 6 foot, 2.6mm diameter cable.

Q: 4. will the AT803b lavalier mics take NiMH Rechargeable batteries?

A: The AT 803 lavalier mic will accept rechargeable AA batteries.

Q: 5. Does this bag come with a boom pole holder like some of the larger bags?

A: Hello Aiden,Thank you, for your interest in Orcabags ProductThe OR-28 comes with the two holders for the boom pole at the front of the bagLike the rest of Orca Sound Bags Please do not hesitate to contact us for further info or support,Orca Bags Team.

Q: 6. Will the TascM DR-680MKII FIT IN THIS BAG?

A: Its a little short on the depth.

Q: 7. I'm getting a SD Mix-pre 6 ii, should I get this bag (OR-28) or the (OR-27). They seem so similar other that this one being a little wider. Is that the only difference?

A: The Mixpre-6 II will fit in both the OR-28 and OR-27. The two Orca bags are very similar in design but differ in their width and height. Dimensions of the Mixpre-6 II are 6.5 x 1.4 x 4.6" (166 x 36 x 118mm). The interior of the OR-28 is 8.5 x 4.5 x 6.5" (215 x 115 x 165mm) and the smaller OR-27 is 8.5 x 3.5 x 5.1" (215 x 90 x 130mm), The interior of the OR-28 is 0.98" (25mm) wider and 1.38" (35mm) taller than the interior of the OR-27.

Q: 8. Will the OR-28 fit the SD MixPre10t?

A: Hello ,The OR-28 Will be too small, The best fit for the Mixpre 10T is the OR-30 and above , Best reagrds, Orca bags Team

Q: 9. What is the distance, center to center, of the 1/4x20" mounting screws? One of the photos says 18mm side spacing, but I'm not sure if they are referring to the distance between the screws.

A: This handle is designed to work with Smallrig cages and Smallrig does not provide the spacing information.

Q: 10. Will this fit the zoom f6? Looking for a solid bag to hold that as well as the deity connect.

A: The zoom F6 and your Deity Connnect wirelss microphone system will fit this bag with room to spare.

Morgan	23/07/2024
Excellent bag! Very well constructed. Perfect amount of pockets and access points. I'm using it with a Mix Pre 6 II and it fits real well. I just use the cushion underneath. Don't really use the supports that it comes with. I run an Anker usb c/a PD battery with a usb a splitter to charge Rode wireless GO II receivers and power the MixPre6 II. I cut up some Velcro cable management ties into small strips and they work perfectly as a way to route cables and keep them in place. The inside of the bag is soft, so you can pretty much attach anywhere. The battery goes in the small back pouch, front pocket has straps for lav mics and the ends of the charging cables when not in use, which are run through the middle of the bag to that back battery. It's so clean and slick. I plan on getting an even smaller organizer craft mix for microphone accessories(moleskin tape, windscreens, etc) as I think there's still enough room for that in the front pocket. The padded strap is great too. I just wish I could get some kind of lid for the whole thing to store it all in the bag. For now I'm just using a towel and keeping the whole thing in a Rubbermaid bun with other audio gear to protect it when not in use. Check out DSLR Video Shooter's wireless audio bag setup on youtube for more on this bag. In the video description there's a link to an unlisted video where he builds the bag step by step and it shows off pretty much every bag feature. 5