The Novation Peak is an 8-voice polyphonic synthesizer based on the Novation Bass Station II analog monosynth; it is well suited for musicians, sound designers, and synthesizer enthusiasts. The instrument features analog-sounding NCOs (numerically controlled oscillators), which include 3 new Oxford oscillators per voice, as well as a flexible digital domain with 17 digital wavetables. The instrument also features a multi-mode, analog state-variable OTA filter with high-pass, band-pass, and low-pass selections with 12/24 dB slopes. Peak's sound engine is rounded out by the true analog distortion and digital effects including chorus, delay, and reverb.

At the heart of the synthesizer lies the high-powered processor component called a field programmable gate array (FPGA), which far surpasses traditional DSP chips. Each of Peak's eight voices has an independent oversampling digital-to-analog converter (DAC). These DACs are oversampling at over 24 MHz (24 million times per second), using a simple RC (resistor-capacitor) filter on their output in the analog domain. Peak's ability to generate waveforms at the oversampling frequency (up to 512 times the traditional rate) ensures that Peak's waveforms are pure at all frequencies and free from digital artifacts, no matter how aggressively the pitch is modulated.

The front panel of the synthesizer provides a variety of controllers for 1:1 control over most of its parameters. There are 42 control knobs, 8 sliders, 2 data encoders, 46 total function buttons, 2 Animate buttons, 90 indicator LEDS, and a crisp OLED display. What's more, most of the control knobs, switches, and sliders transmit continuous controller data for recording and playing back automation from your sequencer of choice.

The rear panel offers a 1/4" headphone output, stereo (left & right) 1/4" outputs, two 1/4" pedal inputs, and an 1/8" CV modulation input for incorporating modular synthesizers. Additionally, the instrument features MIDI In, Out, and Thru via standard 5-pin DIN connectors. The on-board USB port is class compliant and transmits system and MIDI data. Peak includes a 12 VDC power supply, USB cable, and a download card for Ableton Live Lite 9 and Loopmasters sample content.

Digital/Analog Hybrid Synthesizer    8-Voice Polyphony    512 Memory Patches, 256 Factory Presets    5 x Voice Modes & 3 x Oxford Oscillators    State-Variable OTA Filter per Voice    2 x LFO, Ring Mod, Noise, 3 x Envelopes    16-Slot Mod Matrix + Arpeggiator    Chorus, Reverb, Delay, Analog Distortion    Includes Ableton Live Lite 9 + Samples

• Stereo: New spread modes, panning per voice, and panning in the mod matrix give additional control and allow for sound design in the stereo field. Now you can create bigger, wider, and more intricately textured soundscapes.
• Modulation and Unpredictability: Create deeper and more experimental sounds with new mod destinations, noise as a mod source, and additional LFO 3 and 4 parameters. Animate Envelopes and Arpeggiator Chance features open more creative performance possibilities.
• Effects: New effects, including Chorus Modes, Flanger, and Phlanger add new tonalities. Additional effects modulation destinations open up more experimental sound design. The new Lo-Fi delay mode enables a more vintage style sound.
• Bug Fixes: The firmware update v2.0 includes a number of bug fixes.

• FPGA-based numerically controlled oscillators (NCOs) running at 24 MHz generate waveforms indistinguishable from those produced by analog oscillators
• Eight-voice polyphony
• Three multiwaveform oscillators per voice
• Waveform shaping on all waveform types
• Analog signal path (filters, distortions, VCA)
• Traditional, dedicated-function rotary controls
• LP/BP/HP filter with variable slope, resonance, overdrive, and modulation options
• Two independent LFO sections
• Separate Amp and Mod envelope sections with ADSR fader controls
• Ring modulator inputs (Osc 1 and 2)
• Versatile arpeggiator with wide range of patterns
• Glide (portamento) with dedicated time control
• Pre-loaded with 256 brand new patches
• Memory for 256 additional user patches
• Two Animate buttons for adding spot effects in live performance
• Powerful effects including distortion, delay, chorus, and reverb
• Class-compliant USB port (no drivers required), patch dump, and MIDI
• OLED display for patch selection and parameter adjustment
• External DC input (for supplied AC PSU)
• External CV input for integration with other analog equipment
• Headphone output
• Supports any two pedals (sustain or expression)
• Kensington security slot
• Optional stand available

• Structure
  • 8-note polyphony (dependent on voices used per note)
  • Mono-timbral
  • 5 voice modes (Mono, MonoLG, Mono2, Poly, Poly2)
• Per voice
  • 3 oscillators
  • 1 noise generator
  • 1 ring modulator
  • 2 LFOs
  • 1 Amp envelope and 2 Mod envelopes
  • 1 filter
• Waveforms include sine, tri, sawtooth, square/pulse, plus 17 wavetables of 5 waveforms per row
• Filter
  • 1 x state-variable OTA filter per voice
  • 12/24 dB slope
  • Low-pass / band-pass / high-pass
  • Pre-filter overdrive
  • Post-filter distortion
• Modulation
  • 16 modulation slots per patch
  • Each slot has 2 sources to 1 destination
• Mod sources
  • Direct (depth)
  • Modulation wheel
  • Aftertouch (polyphonic and channel)
  • Expression pedal 1
  • Expression pedal 2
  • Keyboard velocity
  • LFO1 positive
  • LFO1 bi-polar
  • LFO2 positive
  • LFO2 bi-polar
  • Amp envelope
  • Mod envelope 1
  • Mod envelope 2
  • Animate 1
  • Animate 2
  • CV mod input bi-polar
• Mod destinations
  • Oscillator 1-3 frequency, v-sync level, shape amount, and level
  • Noise source level
  • Ring modulator output level
  • Overall synth output level
  • Filter drive, distortion, cut-off frequency, and resonance
  • LFO 1 and 2 frequency
  • Amp env / Mod env 1 / Mod env 2 attack, decay, and release
  • FM osc 1 -> osc 2, osc 2 -> osc 3, osc 3 -> osc 1, and noise -> osc 1
  • Osc 3 -> filter cutoff frequency
  • Noise -> filter cutoff frequency
• Effects
  • Analog distortion
  • Chorus - 3 types
  • Delay with 16 types of delay sync, LP and HP damping, slew, and stereo
  • Reverb - 3 types
• Miscellaneous
  • Arpeggiator w/ key latch – 33 patterns
  • Patch storage - up to 512 on hardware (ships with 256 factory patches)
  • Glide
  • All knobs (excl. volume), sliders and most buttons transmit and receive MIDI cc commands for external control and mapping

Related Questions and Answers

Q: 1. Does it come with the shelf?

A: Yes, the ASM Hydrasynth Deluxe Digital Wave-Morphing Synthesizer Keyboard (16 Voices) includes a laptop shelf with purchase.

Q: 2. Can this control the Sound Devices MixPre series (mk i and/or mk ii)? Or is that a different Novation controller?

A: Yes the Novation Launch Control XL is directly compatible with the Sound Devices MixPre series recorders. So is the Akai MIDIMIX, Korg nanoKontrol Studio and Korg nanoKontrol 2.

Q: 3. Will a Line 6 Helix Lt fit?

A: Hi,This bag was designed to fit a Novation Launchkey 25. The dimensions of a Launhckey 25 are 450mm length x 270mm depth x 90mm height.I hope this helps.Best regards,LaurenceNovation

Q: 4. how long does the battery last?

A: This is not a documented specification. Battery life will be dependent upon the volume setting and the quality of battery used.

Q: 5. how to open to change the batteries?

A: You need to push down on the three lines on the battery bay then pull the door down.

Q: 6. Does this come with a USB-A to USB-C cable? It's not listed on the In The Box thing, but it's mentioned as included in the manual on Novation's site.

A: Yes. The USB-A to USB-C cable is included in the box.

Q: 7. Hi, to the seller,I like to know if this is compatible ROKU 3920X?

A: Yes, the Roku 3920X is the Roku premiere and is compatible.

Q: 8. Is the Roku 4 - model 4400x supported by this remote?

A: Yes, this works with the Roku 4400x also known as Roku 4.

Q: 9. lost volume control ability. Everything else works. How can I restore?

A: Please follow these steps sequentially and check if it resolves the issue: 1. Press the Home button on your Roku enhanced remote 2. Scroll up or down and select Settings 3. Select Remotes & devices and then select Remote 4. Select Set up the remote for TV control

Q: 10. Is this compatible with a Roku 3600X streaming stick?

A: Yes, they are compatible.