Unbalanced Receiver Stereo Rca

Rdl D-cij3 Consumer Input Jacks (mono) (white/gray)

Product Code: ga4176
Availability: In Stock

$318.45 $506.34

Qty

19 reviews Write a review

Description
Reviews (19)

The D-CIJ3 Consumer Input Jacks (Mono) from RDL can mix two unbalanced line level audio sources (RCA or stereo mini jack) to a mono balanced or unbalanced audio line.

Stereo Inputs to Mono Output Stereo Inputs on RCA and 3.5mm Jacks Unbalanced to Balanced Conversion Transformer-Isolated Unbalanced Line In Hum Cancellation on Unbalanced Line In Detachable Terminal Block Outputs

Parameters
Input	RCA x 2 Stereo mini-jack x 1
Output	Detachable terminal block
Dimensions (WxHxD)	4.13 x 1.7 x 2.15" (10.49 x 4.32 x 5.47cm)
Packaging Info
Package Weight	0.5 lb
Box Dimensions (LxWxH)	4.85 x 4.35 x 2.2"

Outputs connections are on detachable terminal block

Transformer isolation and hum isolation for unbalanced line inputs

Fits in single gang box

Line-level output to feed 10kΩ inputs

Related Questions and Answers

Q: 1. Is this RDL EZ-MPA2 microphone preamp good for voice over only recording?

A: The EZ-MPA2 is ideal for adding microphone inputs to mixers and amplifiers with line inputs, and it can be used in houses of worship, restaurants, clubs, meeting rooms, educational facilities, conference rooms, studios and commercial sound systems. -------------------This product is not designed or recommended for voice-over or other vocal recording projects.

Q: 2. What size wire plugs into the block in the rear? I used 22 AWG mic cable (black, red, stranded copper shield), is that correct?

A: Yes. 22 gauge is the typical size for line level audio, which is not a high level signal. 22 gauge is correct.

Q: 3. Is it rack mountable?

A: If you use a rack mount shelf to set it on.

Q: 4. Would this be good to split audio for a press conference?

A: The RDL RU-ADA4D is designed for permanent installation, and meant to be hardwired for audio distribution in media rooms, press conferences where audio jacks are preinstalled into the walls. For field use you may want to take a look at a Press Box. a href= http://bhpho.to/16GrjXQ target= _blank http://bhpho.to/16GrjXQ/a

Q: 5. What is the part number for the power connector?

A: RDL PS-24V3A 24VDC Switching Power Supply with North American Cord is the correct power supply. B&H # RDPS24V3A

Q: 6. Is this (mono version) what I need for a 70V audio system in a restaurant? Or do I need the stereo version?

A: Most likely you use the mono for standard 70v. But it really depends on the design and how you plan to use the space.

Q: 7. Do you have these (STM-2) in stock and if so how quickly can I get them in Richmond, Va.? Thanks

A: We do currently have the STM-2 in stock and available to ship. This unit also currently qualifies for free Expedited Shipping which has an estimated 2 day ship time to VA. please contact a Sales Rep by phone at 800-606-6969 or visit the product page to place an order.

Q: 8. Is this equipment and it's power cord enabled / compatible to work in United Arab Emirates?

A: This product runs off of DC power. 24 to 33 Vdc @ 55 mA.

Q: 9. Is the 1/4" output balanced or unbalanced?

A: Per Galaxy Audio, the 1/4'' output is unbalanced.

Q: 10. Can this be used with an 8 Ohm speaker rated at 25w RMS?

A: If you are playing only backgound music then its fine maybe if you need a speaker in a small area like a restroom or a small room then its fine. keep in mind the RDL PA6 is a mono amp 6 watts, its mainly design for a 8 watt or 12 watt 8 ohm speaker. keep volume low so you dont over heat Amp becuase your speaker is way too powerful. If you want more volume from from your speaker maybe look for a 50 watt 8ohm amp to match your speaker .

Alfred	11/09/2024
RDL is the best and they make great, essential analog audio components that nobody else does. Incredible reliability and simplicity. 5

Bret	04/09/2024
I have used these in the past, and are really nice to use where space is a consideration, but even when space is not a consideration this is an item that I would still consider using. The RDL Website has information about using this preamp, so I would suggest visiting their Website if you have never used this before. 5

Klovin	25/08/2024
This is my 2nd time purchasing this bag because I love it so much!!! I have searched for something just as good but nothing compares. It has been my purse and hiking backpack. 5

John	24/08/2024
This item arrived exactly on time, as it was projected to. Likewise, it was packaged with extreme care to defer damage in transit. 5

Elpoco	19/08/2024
This amp lives up to it's lineage - predictable, straight-forward and so far dependable. The only negative I have to relate on this purchase is the complete lack of mention that a power supply is not included or integrated. 5

Jay	08/08/2024
Another fine product from Radio Design Labs. Their stick-ons are fantastic. Have needed new TT Preamps for a while and finally ordered these. They install in a snap (running balanced out to a vintage Gates stereo board) and put out LOTS of gain. EQ is smooth (no raspy silibants or spattered consonants). Worth every penny for my studio. 5

anyonymous	26/07/2024
Quick way to add a self powered sub to a 70v system. Also have fed a main PA the E-page system before. Works perfect! 5

anyonymous	18/07/2024
I manage the sound hardware for our congregation. Our mixer has a limited number of inputs. I was able to use this device to properly combine the audio from an MP3 player and a CD player into a single channel on the mixer. At times it can be tempting to just use a Y-cable to do the job, but this can damage sound equipment. This box will do it properly. 5

Fred F	13/07/2024
The line I connected to was expected to be 70V but may not have been. I adjusted the potentiometer close to 20V and it is working fine. 5