Trs Bluetooth Receiver

Senal Right-angle Locking 3.5mm Trs To Right-angle 3.5mm Trs Output Cable For Camera-mount Receiver (15")

Product Code: ga41826
Availability: In Stock

$59.85 $83.19

Qty

12 reviews Write a review

Description
Reviews (12)

The Right-Angle Locking 3.5mm TRS to Right-Angle 3.5mm TRS Output Cable from Senal is a 15" replacement cable for Senal AWS-2000, Sennheiser EW, and Sony UWP camera-mount wireless receivers. On one end, the cable features a space-saving, right-angle locking 3.5mm TRS connector that securely locks into the receiver's output jack with a quarter-twist turn. On the other end, the cable features a right-angle, 3.5mm TRS male connector compatible with devices that have 3.5mm TRS female input connector.

For Sennheiser & Sony Receivers Fits AWS-2000 Receiver Replacement 15" Output Cable Right-Angle, Locking 3.5mm TRS Connector Right-Angle, 3.5mm TRS Connector For Devices with a Mini-Jack Input

Parameters
Connector 1	Locking 1/8" (3.5 mm) TRS right-angle
Connector 2	1/8" (3.5 mm) TRS right-angle mini-jack
Cable Length	15" (38 cm)
Weight	0.6 oz (17 g)
Packaging Info
Package Weight	0.06 lb
Box Dimensions (LxWxH)	4.3 x 4.05 x 0.45"

The AWS-CBL-MINI is a replacement output cable for Senal's AWS-2000 wireless system receiver. It is also compatible with the Sennheiser evolution 100, 300 and 500 series, and Sony UWP receivers.

The right-angle, locking mini-jack connector attaches to your receiver and locks into place with a quarter-twist. The space-saving design ensures a secure connection and won't come apart even when it's pulled or stressed.

Related Questions and Answers

Q: 1. Is this also compatible with Sennheiser G4 receivers?

A: The Cable Techniques Right-Angle Locking 3.5mm TRS to Low-Profile TA3M Coiled Cable (8 to 15") would not be recommended for use with Sennheiser receivers. The Sennheiser CL 35-XLR Right-Angle Locking 3.5mm TRS to XLR Male Coiled Output Cable (BH #SE700062 ) should be used instead.

Q: 2. Can I use this to jam the blackmagic video assist 5 inch 12g?

A: No, the Deity Microphones C15 Right-Angle Locking 3.5mm TRS to Right-Angle BNC Timecode Cable is intended for use with the Deity Microphones TC-1 Wireless Timecode Generator Box (B&H # DEDTT0272D80) which uses a locking 3.5mm connector. The BNC connector would be for connection to the timecode input on the device that you are connecting to. The Blackmagic Design Video Assist 5" 12G-SDI/HDMI HDR Recording Monitor has a non-locking 3.5mm audio input, so if you are jamming timecode to the audio input you need a cable that has a non-locking 3.5mm TRS connector. If you are feeding timecode from a device with BNC timecode output, you can use the Tentacle Sync Tentacle to BNC Cable - Right-Angle, 16" (B&H # TEC08) or the Tentacle Sync Tentacle to BNC Cable - Straight, 16" (B&H # TEC06).

Q: 3. When plugged into a MixPre 3 II will I still be able to close the sides of my Stingray bag?

A: If you have a little bit of space between the end of the MixPre 3 II and the end of your bag, then you will be able to use the Sennheiser CL 35-XLR Right-Angle Locking 3.5mm TRS to XLR Male Coiled Output Cable without any problems.

Q: 4. Is this compatible with Sennheiser receivers?

A: Yes, this Senal cable is compatible with Sennheiser receivers. You may also want to look at the Sennheiser CL1 cable (B&H # SECL1) which serves the same purpose.

Q: 5. Hi Is this compatible with Sony URX-P03 Camera-Mount Receiver?

A: Yes it is.

Q: 6. Can I plug this cable in to a ZV-E1F?

A: Technically yes, you could plug the TRS connector of the Deity Microphones C15 Right-Angle Locking 3.5mm TRS to Right-Angle BNC Timecode Cable into the Sony ZV-E1's 3.5mm audio input, but this won't accomplish anything. The 3.5mm tip of the cable is meant to connect to the Deity TC-1's timecode output, and the BNC connector goes into a camera's BNC timecode input. The ZV-E1 doesn't have a BNC timecode input, or any timecode input at all.

Q: 7. Will this cable work with the RodeLink Filmmaker receiver?

A: No. Suggest using the Rode 3.5mm to 3.5mm with below adaptor: https://www.bhphotovideo.com/c/product/387850-REG/Rode_VXLR_VXLR_Mono_Mini_Jack.html

Q: 8. Does this work with Sennehiser wireless receivers?

A: Yes it does

Q: 9. Is this cable shielded? (Current cable is acting as an FM radio antenna)

A: Yes, the Senal Right-Angle Locking 3.5mm TRS to Right-Angle 3.5mm TRS Output Cable is shielded.

Q: 10. how long is it?

A: The length of the Deity Microphones C12 Locking Right-Angle 3.5mm TRS to Right-Angle 3.5mm TRS Coiled Cable for Mirorless/DSLR Cameras has not been specified by the manufacturer.

Charles	27/09/2024
I now have the ability to record audio via shotgun mic and a lavaliere simultaneously. This cable is built with quality in mind. The length is perfect for my 5" multi shoe mount. 5

Mauricio	25/09/2024
This cable gives me peace of mind as I can screw it to the connector of my audio recorder. Seems to be well built and hopefully will last long enough. 5

DAN	24/09/2024
I just would rather trust OEM cables. Using for the TC-1 5

William	06/09/2024
Used this recently to shoot a two mic setup. This was perfect to have one audio track with left and right control on a BMPCC4K. Worked fantastic! 5

Paul	01/09/2024
I use this to connect my Rode Wireless Pro to my FX6s to jam sync time code. It works flawlessly. I keep it in the Wireless Pro accessory case with all the other cables and just grab it out before every shoot day to sync A and B cam. It's a great purchase, feels well built, and works every time. 5

Narciso Iii Kit	12/08/2024
The 3.5mm plug connector is good even with 3.5mm jacks without screw connections. 5

Victor	15/07/2024
I use the Rode Wireless go 2 with a video mic on my camera and it splits the audio perfectly. 5

Christopher	18/06/2024
While this is a simple cable to make, I really appreciate the build quality and price Deity has on their TC cables. Good components, looks nice (yellow helps me make sure I get it back), and price, what more do you need to know! 5