The BlueFox3 USB3 Vision Camera from MATRIX VISION is an area scan machine vision camera for inspecting products on assembly lines, gauging and measuring quality, inspecting defects, label inspection on bottles, and more. It allows you to get a physical image of a product onto the computer in two-dimensional space and measure accuracy/inaccuracy by counting the number of pixels. Featuring a C-mount lens mount, the BlueFox3 supports any C-mount lens, including a wide range of MATRIX VISION telecentric lenses. MATRIX VISION is part of the AIA Machine Vision Trade Association.

This version of the camera features a 5.1MP, 2/3" sensor, 75 Hz frame rate, and on-board monochrome processing. The camera captures images at a resolution of 2464 x 2056 but also allows for area of interest selection, as well as binning, and decimation via software. This high frame rate version also has a burst mode function that buffers the acquired images and decouples the acquisition from the image output, allowing the sensor's maximum frame rate to be used independently of the available bandwidth.

The camera has large RAM and FPGA (field-programmable) integrated boards that provide for reliable processing and customization. The FPGA board reduces the CPU load and allows for more functions to be added. The camera also has a fully GenICam compliant mvIMPACT SDK that enables even more flexibility -- complete documentation of the SDK gives you access to many special camera features that could simplify your vision system development. The camera's driver is also compatible with a wide range of 3rd-party software, including those from Halcon, Matlab, and Labview.

Area Scan Machine Vision Camera    5.1MP 2/3" Sensor, Global Shutter    Up to 2464 x 2056 Resolution    3.45μm Pixel Size    75 Hz Frame Rate    High Frame Rate Burst Mode    On-Board Monochrome Processing    GenICam Compliant mvIMPACT SDK    Member of AIA Machine Vision Association

Area scan machine vision camera

5.1MP, 2/3" Sony Pregius IMX250 CMOS sensor with a global shutter

2464 x 2056 resolution (with area of interest selection, binning, and decimation)

3.45μm pixel size

75 Hz frame rate (with burst mode)

On-board monochrome processing

C-mount lens mount

USB 3.0 interface

Large RAM and FPGA boards

GenICam compliant mvIMPACT SDK

Driver is compatible with many 3rd-party software

Counter and timers

Sequence recording using parameter sets

Event notifications

Support for additional information via data streams

Integrated IR cut filter

Member of AIA Machine Vision Trade Association

TC, TCCR, TCSM, TCLWD, TCCX, TCCXQ, TCZR, TCBENCH, TCCRBENCH, TCEDGEVIS, PC, PCCD, PCHI, PCBP, PCPW, PCMP, TCCAGE, MC, MC3-03X, MCSM, MCZR, MZMT12X, ENMT, ENMP, ENHR, ENVF

Related Questions and Answers

Q: 1. can I view the scene without using the digital readout?

A: You can review your photos and videos on the Night Vision Binocular itself. Keep pressing the MODE button until you get to the Gallery mode. Use the ZOOM and IR buttons to scroll up and down your photos and videos.

Q: 2. the picture playback was not working and when I tried to do video it would go back to the setup screen?

A: If you purchased it within the last 30 days, B&H has a return or exchange policy with no restocking fees. https://www.bhphotovideo.com/find/HelpCenter/ReturnExchange.jsp?origSearch=return

Q: 3. can I view the scene without using the card?

A: You can review your photos and videos on the Night Vision Binocular itself. Keep pressing the MODE button until you get to the Gallery mode. Use the ZOOM and IR buttons to scroll up and down your photos and videos.

Q: 4. Does this camera have any environmental controls like a defroster?

A: The Axis Communications Q6225-LE 2MP Outdoor PTZ Network Camera with Night Vision & Wiper (60 Hz), BH # AXQ6225LE, has no environmental controls except for the wiper feature and its IP68 & NEMA 4X rating for outdoor use. The operating temperature is -58 to 131°F / -50 to 55°C.

Q: 5. how long does the battery last before needing to be recharged or swapped out for a fresh one?

A: The SJCAM A10 1296p Body Camera with Night Vision (BH # SJA10 ) will deliver 4-6 hours of use( (Wi-Fi and Screen Closed)) before needing a recharge.

Q: 6. Does this have night vision video recording?

A: Yes it does: Night Vision Functionality.

Q: 7. Does this camera have a defroster?

A: The AXIS Q6225-LE PTZ Camera does not include a defroster. The Q6225-LE is.a vandal-resistant, IK10-rated camera, and resistant to both impacts and harsh weather conditions including wind speed up to 245 km/h (150 mph). it can operate in temperatures of -40 °C to 65 °C (-40 °F to 149 °F) Axis specs: https://bhpho.to/3R9vWmb

Q: 8. what is the matching pendant mount for this camera?

A: The following mounts listed below will work with the Axis Communications Q6318-LE 4K UHD Outdoor PTZ Network Dome Camera with Night Vision (60 Hz) https://www.bhphotovideo.com/c/product/699469-REG/Axis_Communications_5502431_Pendant_Kit.html Axis Communications T91G61 Wall Mount BH #AX5506951 • MFR #5506-951

Q: 9. Will it alert thru homekit if motion is detected?

A: When the Logitech 1080p Outdoor Circle View Camera with Night Vision detects motion it will alert you through Homekit to the various devices that you have connected to Homekit (eg: Apple TV, iPhone, iPad).

Q: 10. Hi B & H Does this item have the GPS and other options like accelerometer? I would like to purchase that particular model but you dont appear to sell it to Australia

A: Yes it does: Features: Color night vision camera with Daytime, Twilight, and Night modes Augmented Reality and Team Modes Support up to 256 GB microSD card IP67 rating: dustproof and water resistant to 3'3" Selectable GPS, accelerometer, and compass functions Capture video and stills in near-dark, moonless, and starlight conditions 1" type CMOS sensor with large pixels for low-light imaging Certified for weapons use 720p video and 0.9MP still photos Selectable f/5.6, 2.0, and 1.4 iris, to adjust to available light OLED EVF with diopter Live stream using the Aurora app and your iOS/Android smartphone Selectable frame rates of 7.5, 15, 24, 30, and 60 fps Shoot up to two hours on a single battery charge