The ikan Mylo MB4-TK Mini Bi-Color Portable Field LED Light Travel Kit with Barndoors includes the MB4 fixture, removable barndoors, a neutral density filter, two batteries, a dual charger, and a hard-sided carrying case. The fixture is a compact battery-powered daylight/tungsten-balanced lighting unit that you can mount on a camera. It features a continuously variable color temperature between tungsten and daylight, and incorporates a built-in variable dimmer that can dim the light's output from 100 to 10%. Built into the light is an LCD display panel that shows a digital readout of the brightness level and color temperature, and features a battery gauge so you know how much power you have left.

The light produces a 50° beam angle and includes both a removable four-leaf barndoors and diffusion gel. The light features slots for two Sony L-series type batteries but does not come with any batteries. A 1/4"-20 threaded hole allows you to mount the light to your camera's accessory shoe via the included ball adapter. You can also stack up to four units together using the interlocking fixture. The fixture outputs the approximate equivalent of a 300W incandescent fixture without the heat or power draw. The included barndoors are simple to install and remove, and the ND filter can be used with or without the barndoors.

420 Total LEDs, Variable Color Temp    Built-In Dimmer    Digital Color Temp Display & Batt Gauge    50° Beam Angle    Accepts 2 x Sony L-Type Batteries    1/4"-20 Threaded Mounting Hole    Multiple Units Stackable    300W Incandescent Equivalent    Carry Case, Barndoors, ND Filter    2 x L-Series Batteries, Dual Charger

The MB4 features a total of 420 LEDs, and a single knob that allows you to vary the color temperature of the unit from 3200 to 5600K. A separate knob controls the dimming of the unit, with brightness range of 100 to 10%.

The dimmer and color temperature settings are controlled by analog knobs, but the digital readout on the built-in display screen allows you to match the output of other units or repeat previous setups. The display also incorporates a four-step battery gauge so you know how much battery power you have left.

The light unit features slots for two Sony L-series type batteries of any capacity, and includes two NP-550-type batteries. The light can run on one or two batteries, but you can use the AC adapter that powers the included dual battery charger to power the light instead, via the small power connector on the back of the unit.

The light incorporates a 1/4"-20 threaded mounting hole in the bottom of the unit, and an interlocking rail system that allows you to stack up to three units vertically or horizontally, with a maximum of six lights.

The included barndoors mount by sliding into a slot on the light fixture. The side leaves incorporate pivoting extensions that allow you to close off the doors and prevent light spill. The ND filter slides into the fixture through its own slot, independent of the barndoors.

The hard-sided carry case stores your light fixture and accessories during transport and storage.

Related Questions and Answers

Q: 1. The main description indicates it does not come with batteries, but 'In The Box' states that the two Sony L series batteries are included, can you clarify? Also, can the flash work with one battery while the other is charging, or are two needed st all times?

A: This product does included 2 batteries and a charger. While you can use two batteries, it will work if you just use one battery at a time.

Q: 2. Is there a slot for a diffusion panel in these lights? Do you sell a panel that would fit? Not looking for sheets of diffusion gel. Thanks

A: No, sheets of gel diffusion would be your best bet.

Q: 3. Could I use these lights to make the light even at the green screen? if not which ones would you recommend for a good price. Thank you

A: yes, you can use the IB508-v2 lights to light the green screen. You might try more than three depending on the length of the green screen.

Q: 4. What's the CRI?

A: According to the Ikan video listed in the image gallery on this page, the host states at the 2'15" mark that this light is 95+ CRI.

Q: 5. I'm looking to replace my old 1000 watt tungsten lights. I use them to produce videos for doctors , physical therapists..typically a physical exam video with 2 or 3 people in an area probably 10ft x 10 ftWould these lights be comparable for this application?..

A: While these LED fixtures would be much more efficient than (3) 1000 watt tungsten lights, it would not be close to the output that those would give you. To get closer to that output, you may want to consider the ikan IFB1024-A 3-Light Dual Color Kit with Anton Bauer Battery Plates, which offers a much more powerful light output. Please see the link for reference: a href= http://bhpho.to/1L7JYZG target= _blank http://bhpho.to/1L7JYZG/a

Q: 6. Is this light dimmable?

A: Yes.

Q: 7. Is there a soft-box attachment that can be used with this?

A: No.

Q: 8. is there a D Tap connection to power off the camera?

A: You can use the following cable to power the light from a D tap source. ikan D-Tap Cable with Coaxial DC Barrel B&H # IKAB101 MFR # AB101. https://bhpho.to/2AkNeHh

Q: 9. is it 2 batteries per light included or just 2 batteries?

A: Hi Thomas, There are a total of six (6) batteries and three (3) dual chargers included with this kit.

Q: 10. What's the capacity of batteries that come with the light and how long they will power the light at max light output?

A: Sergei, at max output it should last approximately 4 hours