Featuring a sliding camera plate, SHAPE's REVOLT VCT Universal Baseplate can accommodate rigs of varying sizes. Simply attach your camera via 1/4"-20 or 3/8"-16 screws to the top plate, and slide it onto the shoulder plate. Fore and aft movement allows you to balance the weight of your setup properly. Further adjustments can be made by moving the shoulder pad. The 15mm rod clamps at the front and rear of the baseplate allow you to secure 15mm accessories such as a matte box, follow focus, lens motors, lens supports, battery plates, or external recorders. Since the front rod clamp is attached to the top plate, the rod-mounted accessories don't need to be repositioned as the rig is adjusted. Additionally, handles can be mounted to the ARRI standard rosettes on either side of the plate. When not shoulder-mounted, the baseplate can be secured to a standard VCT-14 ENG quick release in a matter of seconds, saving time on set.

REVOLT VCT Baseplate with Shoulder Pad    Top Plate with Extendable Handle    RED-Dedicated EVF Mount    Telescopic Handles with Rubber Handgrips    Follow Focus Pro with 28/43 Teeth Gears    2-Stage 4 x 5.6" Matte Box    Front and Rear Rod Clamps    SHAPE Push Button Technology    VCT-14 Compatible    Sliding Camera Plate

The sliding baseplate provides a quick positioning of your camera and accessories for an optimal adjustment of your camera's balance center.

Height-adjustable rod clamp for aligning the 15mm rods at the proper LWS height in relation to the optical axis.

Front and rear rod clamps allow you to extend your rig forwards and backwards.

Built-in storage areas for extra screws and the Allen wrench ensure that necessary adjustment tools are always close at hand.

Safety pins and spring-loaded levers prevent the top plate from sliding unintentionally.

Soft and ergonomic shoulder pad.

Related Questions and Answers

Q: 1. Will this work on Red One MX Camera Mysterium X with PL mount so I can use my canon EF L series lenses?

A: It is our understanding that all RED cameras that have an interchangeable lens mount (which includes the RED One) can use this adapter.

Q: 2. what about the new scarlet w will it work?

A: Yes, all DSMC1 mounts work with the DSMC2 system. This thing is rock solid for the price.

Q: 3. I'm trying to connect Dtap to Lemo to power my RedRaven through a Red DSMC2 V Lock I/O expander. Will this cable work?

A: Yes, this cable will work.

Q: 4. can you also use this on newer camera like scarlet weapon?

A: We see no reason it would not work on any version of the RED Scarlet.

Q: 5. Will this work with a phantom powered mic and a camera that provides +48v power to the mic via the 3.5 jack, like the GH6?

A: The Wooden Camera A-Box for RED KOMODO, WEAPON, EPIC-W, SCARLET-W, RAVEN, and DSMC2 does not provide phantom power. This adapter does not provide phantom power and the RED® Base Expander Module is a required item (not included).

Q: 6. How is the quality with DSMC2 expander?

A: This device is a simple passive adapter (no Pre-Amp of Line level output) to allow easy use of XLR cables on the RED via the 3.5mm stereo connection. There is no reduction in audio quality from the XLR to the 3.5mm.

Q: 7. Will this work with a Sony mirrorless camera?

A: Yes, The Wooden Camera A-Box should work fine with other cameras that offer 3.5mm inputs. Keep in mind the A-Box does not support phantom powering connected microphones.

Q: 8. Will this work on dsmc2 bodies?

A: Hello Lucas. Yes this mount is fully compatible with both DSMC1 and DSMC2 cameras from RED. However, please note that this is a Simple mount with no power or data pins. Therefore you will require a cinevised lens with an iris ring such as a Rokinon or modified Tokina from Duclos Lenses. L-series and other EF lenses that control iris electronically can still be mounted to this product, but all aperture changes would need to be made on a DSLR body, then the lens would be transferred to the mount retaining that aperture.

Q: 9. Will this work with the RED V Raptor?

A: No, the RED V-Raptor does not have a 3.5mm audio input. The Wooden Camera A-Box for RED KOMODO, WEAPON, EPIC-W, SCARLET-W, RAVEN, and DSMC2 will not work on that camera.

Q: 10. Is there an adapter that will work on blackmagic 4k pl mount to use Ef lens

A: Sorry, no there is not. A PL mount places the lens further away from the sensor than an EF mount will. So even if you got an EF lens onto a PL mount, the EF lens would be focusing on a point of air 8 mm in front of the sensor and the image would be hopelessly out of focus.