Featuring a sliding camera plate, SHAPE's REVOLT VCT Universal Baseplate can accommodate rigs of varying sizes. Simply attach your camera via 1/4"-20 or 3/8"-16 screws to the top plate, and slide it onto the shoulder plate. Fore and aft movement allows you to balance the weight of your setup properly. Further adjustments can be made by moving the shoulder pad. The 15mm rod clamps at the front and rear of the baseplate allow you to secure 15mm accessories such as a matte box, follow focus, lens motors, lens supports, battery plates, or external recorders. Since the front rod clamp is attached to the top plate, the rod-mounted accessories don't need to be repositioned as the rig is adjusted. Additionally, handles can be mounted to the ARRI standard rosettes on either side of the plate. When not shoulder-mounted, the baseplate can be secured to a standard VCT-14 ENG quick release in a matter of seconds, saving time on set.

REVOLT VCT Universal Baseplate    Dual Rosette Rubber Handgrips    Shoulder Pad, 1/4"-20 & 3/8"-16 Threads    Two Sets of 15mm Rods    Sliding Camera Plate, Hardware Kit    Anti-Twist Rubber Pads Protect Camera

The sliding baseplate provides a quick positioning of your camera and accessories for an optimal adjustment of your camera's balance center.

Height-adjustable rod clamp for aligning the 15mm rods at the proper LWS height in relation to the optical axis.

Front and rear rod clamps allow you to extend your rig forwards and backwards.

Built-in storage areas for extra screws and the Allen wrench ensure that necessary adjustment tools are always close at hand.

Safety pins and spring-loaded levers prevent the top plate from sliding unintentionally.

Soft and ergonomic shoulder pad.

Related Questions and Answers

Q: 1. What's the difference between the BP10 and BP20?

A: The main difference between the SHAPE Revolt Shoulder Baseplate models is that the BP20 has a lighter weight, and more compact design compared to the BP10. SHAPE Compact Revolt Shoulder Baseplate BH #SHBP20

Q: 2. The photo shows the camera user with a rod coming down from the rig and connecting to his waist. What is this, and is it included in the bundle?

A: That part is not included in this bundle. It is called the SHAPE Telescopic Support Arm with Rod Bloc B&H # SHARM2 MFR # ARM2

Q: 3. Does this work for camcorders ?

A: Yes it will work with work with mid size camcorders

Q: 4. whats the difference between this and the universal baseplate? It's a "compact" version, but how so? is lighter weight, shorter

A: The main difference between the SHAPE REVOLT VCT Universal Baseplate (BP10) and the SHAPE Compact Revolt Shoulder Baseplate (BP20) is that the (BP10) has a sliding plate assembly. The Shape REVOLT Compact model ( BP20) uses a hinge setup.

Q: 5. Will this rig work with the Panasonic HCX1 4K Camcorder?

A: Yes.

Q: 6. what does this plate lack of that the Shape Compact Revolt Shoulder Baseplate for Canon C500 Mark II have? What's the difference?

A: While they are very similar in design and features B&H # SHC52BP matches to the Canon EOS C500 Mark II's optical center. https://bhpho.to/2W8JmBV

Q: 7. Would this fit a Panasonic AG-DVX200?

A: Hello Stephen, Thank you for your question! Our BP22 would surely fit with this camera given its side LCD monitor that opens up. Because of the location of the monitor though, it might be a bit high, but if you plan on framing with an external monitor, the ergonomy of the whole setup would be a better fit. We hope this helps and we thank you for your interest in our products. The SHAPE team

Q: 8. would an ursa mini pro fit this?

A: Yes it will. According to Shape this rig is compatible with Ursa Mini cameras.

Q: 9. Will this work with an arri BP-9?

A: We can only say that the Movcam Baseplate for Sony FX9 with Shoulder Pad will work properly with the Sony FX9 camera.

Q: 10. Would this work with a Sony PMW-F3?

A: Hello Ulises,Thank you for contacting us! The F3 is a camera with a special screw pattern underneath. Meaning that if you look under the camera, you'll notice the attachment screws are not centered but offset. To attach it on our Universal baseplate, you would need a plate adapter between both. Since this camera is a bit older, we do not manufacture such an adapter plate. But you can sure find one on the market.Don't hesitate to give us a call if you need more info on this subject.We thank you for your interest in our products.The SHAPE team