Providing push button adjustment, the SHAPE 4-Axis Push Button Magic Arm with 1/4"-20 Mounting Screw allows you to quickly mount this accessory support arm to a 1/4"-20 threaded mounting hole. You mount your 1/4"-20 accessory to the top of the arm, which features a small mounting platform with rubberized surface. The D-ring assembly enables you to securely tighten down the screw without using tools. The arm is 6.5" long and features slotted D-rings mounting screws enabling you to either use a slotted screwdriver to tighten the screws, or finger-tighten using the D-ring.

The push button adjustment allows you to tilt the mounting platform forward or backward, and another push button provides you with pan adjustment to position your accessory just how you want it. This arrangement doesn't require you to stress, strain, or worry when loosening or tightening the central lock-down arm common to most accessory arms. Additionally, each push button only controls one axis, so you don't have to worry about your arm collapsing when you make an adjustment.

Support Arm with 4-Axis Adjustment    No Tools Required    Fixed Arm Length of 6.5"    1/4"-20 D-Ring Screw for Accessories    1/4"-20 Slotted D-Ring Mounting Screw    Two Tilt Axis Articulation Points    Two 360° Pan Articulation Points

This arm provides two distinct points of 360° pan articulation and two points of tilt articulation.

The push button adjustment on each axis allows you to adjust a single axis at a time, instead of loosening all axes at the same time.

You can attach the arm to any 1/4"-20 threaded mounting hole.

The arm is a fixed 6.5" long.

Made from CNC Machined and anodized aluminum, it is both lightweight and strong.

Related Questions and Answers

Q: 1. Do I need a Shape cheese plate for this to be conducive with the Sony FX6?

A: You do not need a SHAPE cheese plate to mount the SHAPE Push-Button Viewfinder Mount for Sony FX6. As long as the SHAPE Viewfinder Mount can mount to a 1/4"-20 thread with 4 ARRI-style locating pins, you can attach this accessory to another accessory.

Q: 2. Can it work with Sirui SVH15 75mm Fluid Head?

A: Unfortunately, our TRIPAN1 handle was specifically designed for the Sachtler, OConnor, and Cartoni. rosettes. We are unable at this time to confirm if it would fit on a Sirui tripod head.

Q: 3. Can this support other monitor (via 15mm rod)? Or can the integrated rod be replaced with 15mm rod to mount other monitor?

A: Yes, the SHAPE Push-Button Viewfinder Mount for Sony FX6 can work with 15mm rods for mounting other displays to the mount. Shape also offers that 15mm rod clamp that works with the Viewfinder Mount. SHAPE Offset Swivel Monitor Mount with 15mm Rod Clamp BH #SHOMB15

Q: 4. How much weight can this support?

A: The SHAPE Push-Button VESA Monitor Mount to C-Stand or Baby Pin adapter is designed to work with payloads of 30lbs and under.

Q: 5. Can you remove the hot shoe?

A: Hello Shawn,Thank you for your question! Unfortunately, this unit cannot be undone. However, if you need to have this unit without the hotshoe, we can sell you one custom made without it. You'll need to contact us directly for this.We hope this helps and we thank you for your interest in our products.The SHAPE team

Q: 6. Will this viewfinder mount work with th Zacuto tactical handle? I bought the handle so I could extend accessories off of it. Seems like it should work but hoping that someone there can advise. I already have the Zacuto top plate for my C500 Mark ii.

A: Yes, The SHAPE Push-Button Viewfinder Mount for Canon C500 Mark II would be compatible with the Zacuto Tactical handle 15mm mounting point.

Q: 7. Does the d-ring stay put once you move it down to the side, or is it loose where it flops around?

A: Yes it will stay put. It does not flop around.

Q: 8. What's the weight capacity of this arm ?

A: I believe the weight limit is 12 lbs. But it would feel sturdier with less than 10. In my opinion.

Q: 9. Does this work for the FX9 also?

A: No. The following bracket is made and designed for the FX6 unit.

Q: 10. Do you need to buy an extension cable for the monitor?

A: no